Jump to content

I like your old stuff better than your new stuff! - Mk2 Transit LWB MOT pass and a lucky save


DodgeRover

Recommended Posts

Well as there seems to be a bit of interest i've pulled this together from other threads i have running around the internet.

 

Going back to when I first went full time self employed I have wanted a decent big van from the 80’s ideally a LWB Transit or CF. I picked up the older work vehicle bug from my friend Jim Lee (RIP) in Chesterfield who used a variety of elderly Mini vans and Pick Ups for his sign shop, the amount of people who used to come into the shop having seen the vehicles was unbelievable to me (who never really got what anybody saw in Minis anyway)

 

After about 4 years of chasing round and missing out back in November 2013 I finally managed to by myself a van big enough to fit my tools in, this actually turned up offered via FredTransits Mk1Mk2Transit forum and was local to me coming from Bromley

 

post-5068-0-07325400-1505856495_thumb.jpg

 

post-5068-0-59998100-1505856517_thumb.jpg

 

post-5068-0-55485600-1505856538_thumb.jpg

 

post-5068-0-43405800-1505856558_thumb.jpg

 

After spending virtually 24hrs straight on the phone I managed to get it insured and drove it home, first impressions were good unladen the 2.0 pinto is amazingly torquey and the steering is nice and light!

 

I started compounding and polishing

 

post-5068-0-33110500-1505856712_thumb.jpg

 

At least I could see where I had been.

Link to comment
Share on other sites

Thats about all that happened apart from building a bulkhead, ply lining and fitting shelving until June 2014 when a flying visit to my parents got my dad out of retirement to do a bit of tidying up on the van whilst I sorted the LPG that was fitted (ish) but not working.

 

Back doors - both were as bad as each other

 

post-5068-0-31602000-1505856897_thumb.jpg

 

just keep adding more spots of weld until finished - or you get bored and run a seam....finish with lots of grinding off a touch of filler/ primer/ paint

 

post-5068-0-63078900-1505856941_thumb.jpg

 

OS wing was not pretty and I had bought a used one to fit but my dad was keen on saving this one, gas welded

 

post-5068-0-37232400-1505857034_thumb.jpg

 

post-5068-0-84479300-1505857104_thumb.jpg

 

post-5068-0-10102100-1505857130_thumb.jpg

 

I never got around to cutting a deathproof logo for the bonnet so the matt black was primed and painted

 

post-5068-0-28270700-1505857167_thumb.jpg

 

post-5068-0-00350500-1505857218_thumb.jpg

 

Drivers door had the same as the rear doors too, bottom 4" replaced and the frame repaired.

 

Metal sheets were cut and tiger sealed into the window openings for security.

 

post-5068-0-30012000-1505857351_thumb.jpg

 

King of Obsolete magnetic vinyl sticker from watching too much Ice Road Truckers

 

CB install - this one didn't last as water from a leaky screen spoiled it

 

post-5068-0-25381500-1505857435_thumb.jpg

 

All this time I had been running it on petrol, it averaged 18mpg :( I had kind of expected that though. Next up get the LPG working.

Link to comment
Share on other sites

Brilliant looking old beast that is, and hero points extra for actually using it as a work van too!

They're great old things to drive, nothing like modern vans. They feel big and old with that big steering wheel and long gear lever, I love driving mine.

 

If I'd known of you earlier you could have had my old genuine bulkhead. I removed it as I wanted the whole van 'open plan' as a camper.

My screen seal leaks too. I'll have to do something with it soon as it's starting to rust.

 

Did you ever get a twin choke carb on yours?

Link to comment
Share on other sites

What do you do? It's a big van for one person!

I'd love to run an old mk3/4 Escort van.

I'm a carpenter so have to be able to carry 8x4 sheets, 3m lengths of worktop etc inside the van as well as all my tools. I managed with a Corsa combo previously but it was permenantly on maximum load with just tools and a few bits of materials on the roof rack

Link to comment
Share on other sites

My primary school also had a Tranny like this. I remember it was handed down from the local comp so it had been ravaged by teenagers, half the foam was missing from the grey vinyl seats so you sat carefully unless you wanted a pothole to put a metal seat frame right into your arsebone.

If we were good, we were allowed to clean it after school. So kind of them!

 

Also, if it went over a bump going around a corner the back door would pop open. They had to have a teacher sat at the back on "door closing" duty (usually without stopping, this was before Health and Safety or any sort of common sense)

Link to comment
Share on other sites

We had a C-plater at my school.  That did have overdrive.  The PE teacher timed it from 0-60 once - 28 seconds with a full load of 9-year-olds, which I didn't think was too bad at the time.  It got nicked once - turned up a few days later with the school name crudely painted over with white Dulux - it stayed like that for months.

 

The "other" minibus was a W-suffix LT35 which was rough as a badger's arse but would leave the Transit for dead.

Link to comment
Share on other sites

I like vans in general, especially old ones. There's something appealing about a vehicle which is built for pure functionality.

Couldn't agree more.  The concept of a purely functional van seems to have disappeared (at least in western Europe) with the passing of the LDV Convoy, which is a shame.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...