Jump to content

Zel's Motoring Adventures...Merc, Renault, Rover, VW, AC Model 70 & A Sinclair C5 - 24/05 - Rover Oil & Coolant Leak Fixes...


Zelandeth

Recommended Posts

1 hour ago, PhilA said:

Viva/Firenza/Magnum brakes.

They are useless, do not expect them to be good. But, they do work and are fairly reliable.

Good to know.  Though I remember everyone telling me that the unassisted brakes on my Metro would kill me but found those to be absolutely fine, just needed a good old shove to work.

Did a very brief investigation into another very minor thing that was bugging me - this bit of blue overspray from something on the nearside rear quarter.

IMG_20220913_160516.thumb.jpg.24af8d2004750a98f317a8aa198f08be.jpg

I wanted to see if it would buff off.

IMG_20220913_161015.thumb.jpg.14be7d2faba522693564cf154bef8acc.jpg

The answer is "yes, albeit with quite a lot of polishing." Also there's a look at what colour the car should be!

Of course at this point it decided to start raining so that's as far as we got.

Link to comment
Share on other sites

Even vacuum boosted they're a bit mediocre. I had those on my Victor. 

Experimented with Peugeot 106 floating calipers which required a bit of a bodge to fit... While they inspired significant confidence in the brakes they really didn't fit properly.

You can probably find different calipers but those ones will work, they're just a little underspecified for the weight of the car.

 

Link to comment
Share on other sites

Well it looks like I will be seeing if I can get these going.  Can't immediately find anyone with them in stock, and most of those are asking > £100 each anyway...So we'll see if the existing calipers can be coaxed back to life first I think.  Service kits do at least seem to exist, so hopefully they can. 

Biggest question really will be what state the bores and pistons are in so we can see if they need to be sleeved.  I obviously don't have the kit to do that, so it would be a send off to a specialist job.

Link to comment
Share on other sites

Today on "jobs that would be 5000 times easier if I had a proper workbench with a vice..."

Seeing if I could get the pistons in this free.  

IMG_20220919_132646.thumb.jpg.931973a1992e32d6b9afc16057e57569.jpg

It's been stewing in Plusgas for the last few days.

I had a little movement from one piston before, and a combination of patience, compressed air and lots of penetrating oil eventually resulted in this.

IMG_20220919_154726.thumb.jpg.677d13f953f2332061b6846915620fac.jpg

It then pushed back in by hand.  So while it obviously needs to come fully out for inspection and cleaning, that side is at least free now.

The other one however I can't get to shift more than a millimetre or so.  However the headache I've been trying to power through since first thing this morning is trying to turn into a migraine so we've downed tools for the day now.

Link to comment
Share on other sites

The piston bore of these calipers never need sleeved as the piston and square O ring are the sole elements of sealing contact, as long as the seal groove is in decent shape the bore only has to be cleared of corrosion and general dirt and any burs to allow free and fairly loose passage of the piston when dropped in without a seal fitted

In the past I've taken to heating them and using 2 flat screwdrivers to gently pry up via the piston dust shield lip to gradually start exercising the piston back and forth, it's usually either corrosion formation on the upper bore above the main seal but sometimes the seal bonds to the piston which can involve such joy as welding a nut to the piston to draw it out with a threaded bar etc.

Link to comment
Share on other sites

TPA was out and about doing normal car things again today.

IMG_20220920_154339.thumb.jpg.d6f890442ef5e5785072774bf5007060.jpg

Figured as it's been absolutely forever it feels like since I really did a proper inspection of the drive system it was about time I did.

IMG_20220920_165534.thumb.jpg.3499ce25b56eac0544fb98d721f6db8b.jpg

I think I've finally got the knack of removing this thing now.  Usual slight misting of oil from the gearbox output shaft but it doesn't seem to have got any worse.

IMG_20220920_165537.thumb.jpg.94f32d7466b823065ac90f3534321e08.jpg

Belt looks to be holding up just fine.  This will have probably somewhere in the ballpark of 3,500 miles on now I think.  I'll need to look up the logbook to confirm the exact number.

IMG_20220920_170507.thumb.jpg.61b6f8f5c080b6ab52c6f39cbb779387.jpg

Pulley surfaces also look fine.

Primary:

IMG_20220920_170520.thumb.jpg.ced7b67b9cc19ae271d7481e37f2421d.jpg

Secondary (which I basically rely on the camera to look at as I can't really *see* it):

IMG_20220920_170537.thumb.jpg.dc6a9e6bf9771e5b8aeaca35d1138fea.jpg

There was some slight surface tarnish on that when it went on, doesn't look any worse now.

What I did find however was that the bolt on the primary had backed off slightly.  There was no actual movement in the pulley itself (it's a very snug fit on the gearbox output shaft), but that washer behind the bolt was free to rattle around.  I was able to get maybe 3/4 of a turn out of it.

IMG_20220920_170420.thumb.jpg.7d63339131dbe45bb16741ff5d7c7b5c.jpg

Given that the slightly metallic rattling noise at low speed that I've had for as long as I can remember now seems to have gone away I reckon this may have been slightly loose for a long time.  I think I will look at making up a locking tab for that bolt as that coming properly  loose at speed Would Be Bad.  Though I think you would get plenty of warning as before it could come out the bolt would hit the inside of the service hatch I think, so would make all the noise ever.

In the meantime it's been done up Quite Tight, and a decent blob of Loctite has been applied.

IMG_20220920_171329.thumb.jpg.d620c0b9da78ee88fac93c08fb6145de.jpg

This is a good example of why preventative maintenance is a good thing.  I have checked on the belt visually from the engine bay regularly, but it's well worth getting right in here now and then to check on things.

Also found a ball joint where the metal clip holding the dust cap on has rusted away.  Otherwise seems fine still so will just replace the clip if I can find one the right size.  Failing that I do have a full set of replacement ball joints in stock if necessary.

Something I want to try is a little bit of experimentation with drive pulley spacing.  The only thing I've noted with the HP2020 belt versus the standard one is that it drops into "overdrive" slightly earlier than the book says it should.  Given the dimensions are essentially identical I'm guessing the difference there is in the actual weight of the belt.  It's a very low priority task and is only really noticeable when accelerating from a standing start on a gradient, but now it's stopped being a million degrees outside I might be more inclined to try tweaking it a little.  My guess is that we need a fraction more tension on the belt.

Link to comment
Share on other sites

  • Zelandeth changed the title to Zel's Motoring Adventures...Merc, Vauxhall, VW, AC Model 70 & A Sinclair C5 - 20/09 - CVT Checkup Time...

Have got the good piston in this caliper sliding perfectly smoothly through the full range of travel by hand, so I'm inclined to leave it well alone provided it doesn't leak once subject to full hydraulic system pressure again.

The piston cleaned up fine, just a bit of surface tarnish in a few areas.

IMG_20220922_150434.thumb.jpg.31c52aa9fe29970b68af706b8fab95e4.jpg

Given that I will pretty much definitely wind up having to replace the seal if I pop it fully out, leaving it alone makes sense to me for now.

It's been cleaned up, given a good dose of rubber grease and had the (also cleaned) rubber boot refitted.

The other piston however still refuses to move beyond the one point, though is relatively free up to that point.  Getting any leverage on it is bloody awkward and getting heat involved is a non starter because I'm having to hold on to the caliper.  Basically, I really need a workbench with a vice for this job!  

Will have another ponder at the weekend, though I'm really just leaning towards sending these off for refurb at this point.  Especially as from what I've read when this car was initially got running and driving back at the field that the driver's side one had to be split and the pads removed to get it rolling.  So it's likely to be far more of a fight than this one has been so far.

Link to comment
Share on other sites

18 hours ago, Zelandeth said:

Will have another ponder at the weekend, though I'm really just leaning towards sending these off for refurb at this point.  Especially as from what I've read when this car was initially got running and driving back at the field that the driver's side one had to be split and the pads removed to get it rolling.  So it's likely to be far more of a fight than this one has been so far.

You are correct. The whole driver's side brake was seized solid and I had to split the calliper to free it off. I threw it back together with the pads in to make sure that the pistons didn't get ejected but no shims, which should still have been in the boot. The pad retaining pins were pretty mangled and one of the bolts holding the calliper halves together didn't go back in fully. It will certainly need some serious overhauling, if it is indeed salvageable. Good luck sorting it.
 

Link to comment
Share on other sites

20 hours ago, Jenson Velcro said:

Not sure if I’ve missed it, but what make are the Cavalier’s front callipers?

 

A4888895-5510-4E3E-A0D9-B9A6EB2892B8.jpeg

I now know they are the Girling type.  Aside from the "92" stamped into there were no readable markings on the nearside caliper.

-- -- --

This afternoon I decided to play chicken with the weather.  This was rapidly bearing down on my location.

Screenshot_20220924_163746.thumb.jpg.ce7c80c1dff58f13a7c32a3be92e8468.jpg

Mission was simple: Get the offside brake caliper off the Cavalier so I could get the pair sent off to be rebuilt.

In a rare show of organisation, I actually made a point of getting everything I expected to need out in advance and putting it where I could get to it, rather than the usual 15 trips back and forward to the garage.

IMG_20220924_152754.thumb.jpg.d2017dc30a09cc9874cb945571b7053a.jpg

Five minutes later, first contact with the enemy.

IMG_20220924_153206.thumb.jpg.7f6f8ec1dcb19518cc63b55bd4991163.jpg

I was briefly sidetracked by a sinister looking bit of peeling seam sealer on the inner wheel arch, but thankfully I seem to have caught it in time.

IMG_20220924_154130.thumb.jpg.60f50f09c7659a2718cfd4a19c3e3cce.jpg

Really isn't hard to see why these cars have a reputation for rusting.

Thanks to the wonders of power tools, less than ten minutes after picking tools up I had the caliper off, wheel back on and the jack back in the boot.

The little bag the jack and wheel brace live in are even colour coded to the car, how considerate of Vauxhall...

IMG_20220924_154558.thumb.jpg.64fd9f2794a7f62a322285260ad6a21b.jpg

Yes I know they're just all that colour, but it amused me.

This is where we took a moment of "one step forward, two steps sideways."

IMG_20220924_154735.thumb.jpg.620a581a02c677dcf576cb7e6e84a26c.jpg

These two calipers are not the same.

IMG_20220924_155842.thumb.jpg.c9ae3b05f39a6d6e08b75cad4e2e2b18.jpg

The one on the right is presumably original to the car and is clearly made by Girling.

IMG_20220924_155848.thumb.jpg.0ad5db4204d3921f093a100ba7cc9924.jpg

The one which came off the nearside however bears no legible maker's mark anywhere.  The only clear marking anywhere on it is a stamp showing the number "92." This is the only other markings I can see, where are precisely as clear in person as in the photo.

1219570247_IMG_20220913_1216252.jpg.48ecc6930ca1fc23e086187b761a97b4.jpg

Not that surprising to find a car of this age has had a caliper changed at some point, but it's still bloody annoying as I don't have a nice matched set to send off to be rebuilt.

I'm also rather alarmed that the pads in each side are a totally different brand with a significant difference in the amount of wear on them...so it seems that whoever changed the nearside caliper didn't bother swapping the offside pads when it went on... additionally the lower caliper to hub bolt was missing it's washer...You remember me saying I was going to test the rear brakes before pulling things apart?  Nope...on the strength of this, they're definitely getting properly inspected beforehand now.  

Don't suppose anyone has an old nearside Girling caliper floating around do they?

Did spot something I'd previously missed that was a quick fix (well, it still needs a little attention but is a lot better).  Spot the difference.

IMG_20220924_163016.thumb.jpg.1c691a8f13a018109f3b447eee0e296b.jpg

IMG_20220924_163155.thumb.jpg.99c654d87896cc048ab5c4f985f0f65f.jpg

The valance had been shoved upwards on the offside.  It still needs a little finessing and whatever did the damage has broken off one of the tabs where it attaches to the lower part of the wing, but it's a lot better.

IMG_20220924_163228.thumb.jpg.0322ffbcf2c0a82d5e2bd6ac65920566.jpg

So a little stuck while I decide what to do about the brakes.  Having ascertained thanks to someone on Retro Rides that the front calipers are shared with the BMW E21 I have found a couple of places that do have new ones in stock - but still north of £100 each.  The refurb plan is pretty much stalled without a matched set though...so I may well just go down that road.

Link to comment
Share on other sites

  • Zelandeth changed the title to Zel's Motoring Adventures...Merc, Vauxhall, VW, AC Model 70 & A Sinclair C5 - 24/09 - Further Brake Work...
58 minutes ago, Jenson Velcro said:

Looks like there’s a remanufactured rhs ATE caliper on eBay at the moment.

I have to wonder if the difference is something daft like one having a metric pipe union and the other imperial...which obviously is trivial to deal with for us.  An expensive gamble though!

Going to have a look at eBay to see if I can find that one...the LHS is the healthiest looking one, so replacing the driver's side would be the sensible one I think.

Link to comment
Share on other sites

10 hours ago, Zelandeth said:

I have to wonder if the difference is something daft like one having a metric pipe union and the other imperial...which obviously is trivial to deal with for us.  An expensive gamble though!

Going to have a look at eBay to see if I can find that one...the LHS is the healthiest looking one, so replacing the driver's side would be the sensible one I think.

 

DAFBEB21-C765-488F-9B4B-1C2877E467AB.jpeg

E862213B-1F33-409D-8EEA-F7E821F19BF8.jpeg

C3C09BE1-5933-483C-AA16-65FB3B387F75.png

40BF6D9D-DA4D-4825-A690-7C89415E5BC5.jpeg

Link to comment
Share on other sites

Apparently the new caliper has now arrived back home.  Sadly I'm currently 3,500 miles away from the car so it'll need to wait for attention!

Whether that caliper gets sent off along with the original one for inspection and any necessary rebuild work will depend on what it looks like.  I may well send them both away anyway for the sake of long term reliability anyway.  It's not as though I can start putting stuff back together properly until they're both present anyway.  It *looks* good in the photos on the eBay listing, but we all know how much that means.

Also on the subject of brakes, discs.  Am I correct in thinking that the wheel bearing races are pressed into the discs on these?  I've got a new pair of discs in the boot waiting to go on, but will get a bearing set ordered too if that's the case.  If I need to take everything apart anyway I'm inclined to just change the consumables involved to save me time and head off future failures before they have a chance to pop up.

Link to comment
Share on other sites

  • 2 weeks later...

Back home and trying to get caught up with things.  While jetlagged to hell and back (yesterday was effectively a 32 hour day by the time I fell into bed).  Oh, and we had contractors arrive at 0830 this morning to start replacing our roof.  Yeah, genius bit of programming on my part there.  Though in fairness it's the date I was given and with the trouble we've had getting folks in I just took it.

Firstly I've confirmed that the new caliper for the Cavalier will be going off to be inspected and rebuilt as necessary with the one that came off the car.

Yes it's a factory remanufactured part - but as I kind of expected, that looks to have happened somewhere probably in the 1990s and it's sat somewhere less than entirely dry since.

IMG_20221016_123543.thumb.jpg.d48bbf6b0568b088d3fb7bafc7e1559c.jpg

It will probably be fine, but I figure if I'm getting one sorted I may as well just get the pair seen to.  Less likely to come back to bite me then.

The other car related item waiting for me was this.

IMG_20221017_112314.thumb.jpg.bf173a9b7a243cd5a5e802d23e966ff2.jpg

Which I will test fit to the Invacar as and when time and energy allows.  Given the work we've got going on at the moment that might mean a bit of a wait.

Link to comment
Share on other sites

  • Zelandeth changed the title to Zel's Motoring Adventures...Merc, Vauxhall, VW, AC Model 70 & A Sinclair C5 - 17/10 - Tiny Post-Vacation Update...
23 minutes ago, Zelandeth said:

Back home and trying to get caught up with things.  While jetlagged to hell and back (yesterday was effectively a 32 hour day by the time I fell into bed).  Oh, and we had contractors arrive at 0830 this morning to start replacing our roof.  Yeah, genius bit of programming on my part there.  Though in fairness it's the date I was given and with the trouble we've had getting folks in I just took it.

Firstly I've confirmed that the new caliper for the Cavalier will be going off to be inspected and rebuilt as necessary with the one that came off the car.

Yes it's a factory remanufactured part - but as I kind of expected, that looks to have happened somewhere probably in the 1990s and it's sat somewhere less than entirely dry since.

IMG_20221016_123543.thumb.jpg.d48bbf6b0568b088d3fb7bafc7e1559c.jpg

It will probably be fine, but I figure if I'm getting one sorted I may as well just get the pair seen to.  Less likely to come back to bite me then.

The other car related item waiting for me was this.

IMG_20221017_112314.thumb.jpg.bf173a9b7a243cd5a5e802d23e966ff2.jpg

Which I will test fit to the Invacar as and when time and energy allows.  Given the work we've got going on at the moment that might mean a bit of a wait.

I found some with the correct two threads and length but no stop collar and had planed just to thread lock it in. It will be interesting if this works.

Link to comment
Share on other sites

4 hours ago, Six-cylinder said:

I found some with the correct two threads and length but no stop collar and had planed just to thread lock it in. It will be interesting if this works.

Yeah, it will be interesting.  Biggest thing to be careful there is that it's a through hole it's going into so hopefully it will tighten up properly rather than mangle the threads.

The shoulder should greatly help in being able to say "yes that's right" but I don't think serves a massive amount of function aside from prevention of a weak spot I guess that might be able to fatigue over time.

It would be interesting to have a look at to get some precise measurements from for future reference though!

Link to comment
Share on other sites

  • 2 weeks later...

Funny how having a new roof fitted on your house manages to eat up huge chunks of your time.  Contractors are doing all the hard work, but input keeps (unsurprisingly) being needed.  Usually only for 30 seconds at a time, but it means you really can't get stuck into anything substantial as you keep needing to answer the door.

IMG_20221022_171106.thumb.jpg.09b50ed1ca82eb6d3c96d8b772aaf330.jpg

We're getting there.

[] All four roof sections fully stripped back to bare refers.

[] All felt & battens replaced.

[] 4X gable end rafters that were totally rotten replaced.

[] Roof light & support framework replaced (well...not yet, currently there's a huge hole where it used to be).

[] All new ridge tiles.

[] All soffits (all ~90 metres of them) and gutters replaced.

[] A LOT more broken tiles than either us or the contractor had anticipated replaced.  The fact that the tiles had basically been holding the north facing roof aspect together for the last 20 years probably has something to do with that.

In all we're expecting the final bill to come in somewhere in the ball park of £30K.  Isn't home ownership fun.  On the plus side, having all that having just been done will be a nice thing to have listed on the for sale ad when we come to sell the place.

Does mean though that I've barely touched anything car wise this week.

A few things have progressed though.  One of which is having *finally* got a first draft completed of TPA's page for my website.  It's still just raw text at this point and still needs a load of editing, but it's a start.

The overall Invacar FAQ page which goes along with it though is mostly done.  You can see that over here if you're interested.  Will be a couple of minor alterations to be made there, but unless I (or someone else) think of anything worthwhile to add there that page will largely be left be.

Despite time being in short supply, something somehow managed to follow me home a couple of days ago.  Funny how that keeps happening.

IMG_20221025_150609.thumb.jpg.a2bcf770a39a2cf73ba378d3e893450e.jpg

IMG_20221027_152411.thumb.jpg.e26a444afc7ee3dc026f386092940a01.jpg

Never going to turn down an opportunity to spend some time behind the wheel of an MGB.  I know a lot of people seem to like to hate them because they're so ubiquitous in the classic car world, but I like them.  Just enjoyable cars to drive I find, something very right about sitting here.

IMG_20221026_150534.thumb.jpg.b2efb3970ea9d11adc34ff540301dbfd.jpg

Was quite a lot more serene when cruising than last time I drove this car because I remembered the existence of this switch.

IMG_20221025_145834.thumb.jpg.72caeeec13d1580606a867612e5d0835.jpg

Yeah...totally missed it both of the previous times I drove it.  Never said I was the brightest spark.  Derp.

There were a few things she was here to have looked at.  All pretty quick jobs, so ideal to pick away at while remaining in earshot of the roof guys in case they needed me for anything.

[] Non working radio.

[] Dead instrument panel lighting.

[] Missing clutch pedal rubber needs replacing.

[] Rev counter not working.

The radio issue became pretty much immediately obvious once I pulled the head unit out the dash.

IMG_20221025_151806.thumb.jpg.9313f6a6f3566c1e442e9380a53ce024.jpg

Yep...not being plugged in would have a lot to do with it.

Turns out this head unit had never been hooked up based on the (very crusty) fitted ISO connector not matching the proprietary one on the head unit.

IMG_20221025_151950.thumb.jpg.43d95c90bfc024b75124566ab8c739c9.jpg

Helpfully the fitting kit turned out to be stashed in the centre arm rest.

IMG_20221025_154430.thumb.jpg.50b8d15bc26842f7402020e1691546bc.jpg

Which also meant I could happen to this mess.

IMG_20221025_151839.thumb.jpg.e8b3e767fe740d022d6a57271758bec8.jpg

IMG_20221025_151841.thumb.jpg.86d9f079256970c3a81875b709e74f6f.jpg

Which I totally forgot to take a photo of after tidying.  However the radio now works properly.

IMG_20221025_165652.thumb.jpg.316ea15225bab36337c477d1db1e1a99.jpg

Something more period appropriate has now been sourced and will be swapped in at a future date.  Will be a two minute job at least now the wiring is sorted and labelled.

While digging the spaghetti out of the centre console I discovered a free range lamp holder trying to find its way into the driver's footwell.

IMG_20221025_162920.thumb.jpg.9949202301aa0647f327acabfe4cb058.jpg

This of course actually belongs in the indicator lamp for the rest windscreen demister, so was clipped back in there.  Have to wonder how long it is since that last worked.

IMG_20221025_163154.thumb.jpg.9c2f34adb9eefa1115ca7f592a6bb0f7.jpg

The panel lights were even easier to revive...after I have the rheostat a minute or so of highly technical wiggling back and forth through its full travel the dash lights were working properly.

IMG_20221029_101855.thumb.jpg.3e3707ffe2ecbb0ee2c96bbe045c4f60.jpg

Just about visible in daylight of you squint at the right angle.

IMG_20221025_145842.thumb.jpg.6fd09f3ab37cd286651f847f92ba1084.jpg

Which is easier to see after dark.  Definitely back from the era where dash lighting was just what you needed and nothing more.

IMG_20221025_190531.thumb.jpg.b33e8793bf41980e61feceaf363bc362.jpg

Quite cozy though, I'd take it over the cold white blindingly bright LED nonsense that's the norm these days.

IMG_20221025_190513.thumb.jpg.7a3828604d25ea7d62aa164be0403937.jpg

If I can convince the control to come out of the dash I'll give it a grease up - the knob didn't seem impressed with the idea of being removed when I last tried though, and I'm not going to risk breaking it.

The rev counter issue has proven to be slightly more elusive.  Everything at the coil end seems to be in perfect order, though there isn't a direct connection there I can see, it must T off somewhere else in the loom.  I need to sit down with a wiring diagram to confirm where the signal for the tach is tapped off.  

Thought I'd pop it out of the dash for a look, as wiring issues behind there seem high on the likelihood list to me, or the famously high quality wiring connectors used on BMC products of this era causing problems.

Oh.

IMG_20221025_153427.thumb.jpg.70e8aa416800421aa93947559b0f83b7.jpg

Well that's annoying.  The tach doesn't quite fit past the indicator switch...I literally need about an extra 1/8" of clearance.  I did faff about with it for a while, but the retaining lugs stick out just far enough behind it that I can't quite get it out.  I intend to revisit this at the weekend.

I have stuck my camera up behind the dash and couldn't see anything amiss, nor did wiggling wires around have any effect.  The tach has briefly sprung back to life completely of its own accord on a couple of occasions, and my gut feeling is that it may well be the unit itself that may be at fault.

We'll be back to this.

Not much to be said about replacing the rubber grip pad on the clutch pedal other than that it's now been replaced.

IMG_20221025_145831.thumb.jpg.95ea3879d887691339fdf59a12ba7248.jpg

Wasn't even that awkward, I was prepared for that to be quite a fight with how deep and narrow the footwell is but it wasn't anywhere as bad as I expected.

Something which ended up on my list within about 1/4 a mile was the fact that the mirrors both wobbled around while driving and also rattled while doing so.  That was going to rapidly drive me round the twist.

IMG_20221027_152211.thumb.jpg.65e733b13d6d3b9c2f38c4313093d541.jpg

This was resolved by tightening the screws on the brackets (they were both less than finger tight), then as I discovered the glass was also very loose, so added some closed cell foam blocks in behind there.  This has resolved both the rattle and the wobble.  Well, as much as you'd expect on an MGB, they're always going to wobble a bit.

As we were expecting some quite heavy rain overnight yesterday I put a temporary patch on the obvious holes in the roof where you could see straight through to the cabin.  Realistically this sunroof needs replacing, but this hopefully kept the worst of the rain out.

IMG_20221027_152356.thumb.jpg.14b1800c4ff41f282f6575016e9c6a91.jpg

It certainly has reduced the wind noise from that corner!

Hoping to get some time to finish investigating the rev counter issue tomorrow then it will be back off to its home and into winter hibernation.

This has definitely reminded me though quite how high the MGB really should be on my list of stuff to own at some point.  I do like these old crates.

Link to comment
Share on other sites

  • Zelandeth changed the title to Zel's Motoring Adventures...Merc, Vauxhall, VW, AC Model 70 & A Sinclair C5 - 28/10 - MGB Fettling...
9 hours ago, Zelandeth said:

Radio - Something more period appropriate has now been sourced and will be swapped in at a future date.  Will be a two minute job at least now the wiring is sorted and labelled.

As we were expecting some quite heavy rain overnight yesterday I put a temporary patch on the obvious holes in the roof where you could see straight through to the cabin.  Realistically this sunroof needs replacing, but this hopefully kept the worst of the rain out. It certainly has reduced the wind noise from that corner!

Thank you for all you work in improving the MGB GT.

I have this Sparkomatic SR 312F Radio/Cass I am guessing from the 1980's. 

The roof is very disappointing the original lasted 45 years and in May 2016 I had a new one fitted that is already in the same state as the original after all its years.

IMG_20221029_073332 broad.jpg

IMG_20221029_073402 broad.jpg

Link to comment
Share on other sites

1 hour ago, Six-cylinder said:

Thank you for all you work in improving the MGB GT.

I have this Sparkomatic SR 312F Radio/Cass I am guessing from the 1980's. 

The roof is very disappointing the original lasted 45 years and in May 2016 I had a new one fitted that is already in the same state as the original after all its years.

IMG_20221029_073332 broad.jpg

IMG_20221029_073402 broad.jpg

That head unit should look far more at home in there I think.  I do need to have another glance back there as I just noticed there are four speakers in the car (or rather two aftermarket ones in the boot plus two grills beside the rear seats - may or may not be anything actually behind them) but only saw wiring for two when I connected things up.  Will double check that.

That is poor showing on the roof.  I knew it was a relatively modern replacement but wouldn't have thought for a second it had only been on there six years given how it's shrunk.  That really is shockingly poor.  Especially given this car spends a lot of its life in good conditions under cover.  

At least patching up the split at the one corner should stop anywhere near as much weather being able to pour straight in.

Link to comment
Share on other sites

17 hours ago, Zelandeth said:

The overall Invacar FAQ page which goes along with it though is mostly done.  You can see that over here if you're interested.  Will be a couple of minor alterations to be made there, but unless I (or someone else) think of anything worthwhile to add there that page will largely be left be.

I've just read through that with my proofreading mindset engaged and can find nothing of note except, perhaps, an unnecessary 'for' in this sentance:

Even for vehicles where this is zero rated (for example historic vehicles or a disabled driver) still need to go through the process on a yearly basis, even though there's no actual fee to pay in that case.

However, my eyes now hurt after reading that text on a black background. That would put me off reading it, TBH. Just my 2p worth.

Link to comment
Share on other sites

1 hour ago, High Jetter said:

I've just read through that with my proofreading mindset engaged and can find nothing of note except, perhaps, an unnecessary 'for' in this sentance:

Even for vehicles where this is zero rated (for example historic vehicles or a disabled driver) still need to go through the process on a yearly basis, even though there's no actual fee to pay in that case.

However, my eyes now hurt after reading that text on a black background. That would put me off reading it, TBH. Just my 2p worth.

Cheers for that.  I didn't even really think about it at the time.  I just grabbed one of the standard pallete colours that wasn't normal text - green is usually reserved for hyperlinks.

Will change it to something slightly less painful to read - probably a light grey - to make it a bit less eye wrenching.

I know the white on black is divisive as it stands - one day I may actually learn how CSS works and give people an option of a light and dark theme... though at my usual rate of progress that will probably happen somewhere around April 2063.

I think it was 2002 I originally put that template together!

Link to comment
Share on other sites

  • Zelandeth changed the title to Zel's Motoring Adventures...Merc, Renault, Rover, VW, AC Model 70 & A Sinclair C5 - 24/05 - Rover Oil & Coolant Leak Fixes...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By danthecapriman
      Thought I'd start a thread about my old Capri since it's now reached it's turn in the que to receive a bit of attention.
       
      I've actually had this since 2001, it's an early mk2, on an M reg 1974. Being an early car it's still got mk1 rear axle and single acting type rear brake set up aswell as a few other minor differences from later cars just to use up remaining mk1 parts.
      It started life here in the Portsmouth area and doesn't seem to have ventured far since.
      Originally a stardust silver 1.6 L poverty model, which means virtually sod all regarding luxuries. Basic 2 pod dash with black 'crackle' finish facia, no radio, no sun roof or vinyl roof, not even a centre console!
      When I got to it unfortunately it had suffered severely from serious rust and latterly a vandal attack, having it's door and rear quarter panel booted in.
       
      Over the next couple of years I got it sorted and a cheap re paint into roman bronze, which was a favourite colour of mine at the time. For the first year or two it seemed fine but since then things have deteriorated.
      The respray wasn't good! It's thin in places and started to micro blister in various places, worst of which is all over the bonnet. The same bodyshop also did a bit of the bodywork I hadn't finished which was also pretty poor in some places.
      It's always been a great driver and never struggles at mot time so I just kept on using it and doing nothing more than collecting parts now and again with a view to sort it one day.
      It's also gained a few non original extras over the years like a higher spec wood effect 2 pod dash facia (which I like more than the original), a short console, brown interior instead of the utterly fucked black original, 'laser' 4 spoke alloys and a few other things.
       
      Anyway, fast forward to last weekend, when I dusted it off after winter and noticed various areas of new rust coming through or older rust that's gotten worse. So the decision was made to go for a professional resto job now before I end up finding something else to distract me (like big american cars with knackered engines!).
       
      1974 Ford Capri BBK244M by Dan Clark, on Flickr
      Here it is as it currently stands. Looks ok from a distance but the reality is very rough around the edges and the paint is so bad in places it's becoming embarrassing!
      IMG_0509 by Dan Clark, on Flickr
      And the interior which I'll be re trimming into black leather at some point after the body works done.
       
      It's been taken to the same place that did my Mercury's engine rebuild, since they did such a good job and they seem a good professional bunch.
      I dropped it off Monday afternoon for a thorough check over to build up a list of work and get a rough quote.
      Today I heard back from them.
      Good news so far, I suppose. It is as solid where it counts as I thought it was. Chassis is fine, original strut tops fine, most of the back end is solid and just needs a few repairs here and there.
      The worst is the bottom of the windscreen surround due to the wrong seal being used and then fitted badly causing leaks. Inner sill to A post bottom corner very scabby, front wings pretty crap, and various paint defects etc.
      The engine is fine, compression all in tolerances. Suspension needs work, and some brake pipes are getting quite rusty. So far so good and no surprises!
      There's still more checking to do over the next few days but it sounds alright so far.
      This work should be made a bit easier by having a lot of panels and parts to fix things already. The big find being a new unused pair of front wings. Very hard to find mk2 items now, though I did have to pay for them!
       
       
      The plan here is to make the car solid, reliable and good looking. I'm not making a show car or going too mad as that stuffs not my thing and if it was I'd start with a better more original car.
      Some of the later add ons will be ditched like the mk3 boot spoiler that I hate! And return it to more standard looking mk2 as it should be. No go faster mods or anything like that.
      The main priority is to get the body sorted and painted properly (engine out job and everything) then maybe a bit of mechanical work as needed.
      The original idea was to re paint back into original stardust silver, but having thought about it I'm leaning more towards another favourite Ford colour of the era, Miami blue metallic, which is a lovely colour! Any opinions?
       
      This will be another expensive project but not one I think I could do at home on the drive and do justice to, so I'd prefer to farm it out and get it right this time. It also means I can carry on working on my Transit and Granada at home without another distraction!
      For anyone whose interested I'll try to update this now and then as things progress. I'll also try to get the old pics of the car from when I got it so you can see how rusty it was! Bear in mind though that I paid £100 for this car in 2001 with MOT and tax! Try doing that now.
      I'm sure this is going to be worth the expense, not that I'm even considering selling it of course but I've had it so long I kind of feel obligated to do right by the car in a weird way!
    • By mat_the_cat
      Thought I should probably start a thread, given that a few people have suggested it. For my sins, my first car was a 1985 Hyundai Stellar. Bought back in 1997, when the sun still shone, I had more hair, and the world was generally a better place.
       
      This may be the earliest photo I have, I think from 1998:
       

       
      Anyway, I drove everywhere in it, and clocked up over 100k miles before I was given an Alfa Romeo 75. So I took the Stellar off the road for some much needed TLC. Made some progress on it - Rebuilt all the suspension, fitted a rebuilt Cortina* rear axle, Princess 4 pot front calipers and Capri vented discs etc - before a couple of house moves and renovations put it on the back burner.
       
      * before anyone says they are identical underneath, there are some differences. I fitted a replacement axle fairly early on in my ownership, only to fit that not only was the propshaft flange the wrong size, the UJ was totally different so I couldn't even fit a new yoke. Finding a company on the day before New Year's Eve who could cut off the end, weld a new UJ on and balance it wasn't too easy, especially one that was accessible by push bike!
       
      Anyway, late last year I found some renewed motivation, and have been working on it when time and money permit. Here is what it looked like in October:
       
       
      OMG barn find?

       
      Front suspension OK at first glance...
       

       
      ...but it has turned out the calipers had seized (so are away being rebuilt) and all the (brand new) ball joint boots had perished:

       
       
      Quite a bit of welding is needed too, but I had a setback just before Christmas when we were burgled and my welder stolen
       

       
      Crusty roof rail

       
      I've cleared some of the crap away from it now (it's not stored at mine - I'd love to own somewhere that big!) so might be able to get more photos. Currently working on the rear brakes, and disappointed to find that the shotblasted rear axle is now starting to rust after two coats of POR15 and 7 years storage under cover...
       

    • By mat_the_cat
      A mate of mine at work has just restored this, and now it's (just about) finished, is selling it. He wants what seems like a fair price for it, and it might be my only chance to indulge a boyhood dream before values climb too high. And hopefully I shouldn't lose out!
      Is there anyone around who knows the values they actually sell for? Obviously I've looked at adverts and completed eBay listings, but don't know if they reflect reality!





    • By danthecapriman
      As many of you might have read on the grin thread and my thread about yank headlights on Volvo 740's, I should have acquired myself this one. I've just got a few pics of said Volvo pre rescue as it sits.
       
      For those who don't know, it's an 88 740 estate in 2.3 auto GLE spec (my favourite!) which was owned by my sisters boyfriends grandad. He passed away this year and the cars just been sat unused since mid 2015.
      The family are clearing the property and I was told the Volvo and others were going to most likely go for scrap. I said I'd take the Volvo and asked for a price only to be told I could have it!
       
      The Wolseley 1300 apparently is already spoken for so hopefully that will be saved or at least donate some parts. The Volvo should become mine at some point but the caravan and Omega will probably get weighed in.
       
      So here are the few pics I have to go on.
       
      IMG_0331 by Dan Clark, on Flickr
       
      IMG_0332 by Dan Clark, on Flickr
       
      IMG_0329 by Dan Clark, on Flickr
       
      IMG_0333 by Dan Clark, on Flickr
       
      The Volvo looks ok from the little I can see and having run an MOT history check it seems a good one. It's a low miler at 90k and seems to of only done a couple of thousand miles between tests. Most of the fails seem to be for stupid stuff.
       
      So the plan at the moment will be to try to get it running and moving then try to get it back home. At the moment it's a 100 miles or so away.
       
      To be continued...
    • By captain_70s
      Hullo,
       
      I'm a masochist from Leeds who is running two rusty, worn out Triumph Dolomites as my only transport in rural Aberdeenshire. You might recognise me from various other forums and Facebook groups. Realistically I need to buy a modern car of some sort, but instead I find myself looking at £300 Citroen BXs and Triumph Acclaims on Gumtree and thinking "yeah, that'd fit right in with the rest of the broken cars I can't afford".
       
      On to the cars, the main attraction being my 1976 1850HL "50 Shades of Yellow" that I bought for £850 and is currently my daily driver, here is a picture of it before I sanded off some surface rust and sprayed it badly in the wrong shade of yellow with rattle cans:
       

       
      Within a month of purchase I managed to plant it in to a steel fence backwards after a botched gear change on a wet roundabout and ruined the N/S rear wing, although judging by the other dent that's packed with filler it looks like somebody had already done the same. I also managed to destroy a halfshaft and one of my Sprint alloys (good for an extra 15hp) in the incident, so now it's sitting on it's original steelies but painted black (good for an extra 5hp).
       
      It's only broken down on me twice. once with some sort of fuel delivery related problem which may or may not have been an empty fuel tank and once when the thermostat jammed shut and it overheated and blew out some O-rings for the cooling system. It has recently developed a taste for coolant and oil which is rather annoying, although it's done 89,300 miles which is about 80,000 more miles than BL engineering is designed to last, I'm keeping my eye on eBay for replacement engines... 
      I tried to keep ahead of the rust a bit by rubbing down the arches and re-painting them, but apparently rattle can paint isn't great when you are spraying it at -5C, it also highlighted how although my car might have been Inca Yellow in 1976 it's now more of a "cat piss" sort of shade. So I ended up with the wrong shade of yellow which has rust coming back through after 5 weeks. Did I mention I'm incompetent?
       
      The other car is the first "classic" car I bought, so I can't bear to sell it. It's a '77 Dolomite 1300 and it cost £1400 (about £400 too much) and has been nothing but a pain in the arse:
       

       
      It looks much prettier (from 100 yards) but that's most due to the darker paintwork hiding the rust. It lives a mollycoddled life in my garage, where it somehow still manages to rust, and is utterly rubbish. 0-60 is measured on a calendar, top speed is 80ish but at that point it uses more oil than petrol, it rarely ventures over 50mph and if you encounter an incline of any sort you can kiss that sort of speed goodbye, along with about £20 of 20W50 as it vanishes out of the exhaust in the form of blue smoke.
       
      One of the PO's had clearly never heard of the term "oil change" so it developed into brown sludge that coated everything internally with the next owner(s) blissfully pouring fresh oil on top of it. This lasted until about 600 miles into my ownership when there was muffled "pop" from the engine bay and the car became a 3-cylinder. The cause was catastrophic wear to the top end causing a rocker arm to snap:
       

       
      As this was my first classic car I'd assumed it was supposed to sound like the engine was full of marbles, it wasn't.
       
      I put the engine back together with second hand bits declared it utterly fucked and promptly did another 5000 miles with it. After about 3500 of those miles the oil burning started, valve seals have gone so it's been relegated to my parent's garage as a backup car and something to take to local car shows as the 1850 is now embarrassingly ugly. I'm keeping my eye on eBay for replacement engines (deja vu, anybody?) Oh, I also recently reversed it into a parked Ford Fiesta and royally fucked up the rear bumper, rear panel and bootlid. Did I mention I'm incompetent?
       
      There have been two other cars in my life. My first car, a 2008 Toyota Yaris 1.0 an it's replacement a 2012 Corsa 1.4T. I didn't really want either of them, but it's a long story involving my parents and poor life choices. Ask if you want to hear it!
       
      So that's a brief summary of my current shite. If you want more pictures or details of anything do say as I've got photos of almost everything I'd done with the cars.
×
×
  • Create New...