TrabbieRonnie Posted April 16 Share Posted April 16 Your rear panel is nothing to be ashamed of, check out Rosie's neglected rear end! I have the paint though, it's on the list! Link to comment Share on other sites More sharing options...
rattlecan Posted April 16 Share Posted April 16 So the rear panel isn’t Duraplast like the other panels then? Link to comment Share on other sites More sharing options...
captain_70s Posted April 16 Share Posted April 16 I believe the main body shell is steel with a skim of Duraplast over the top. Link to comment Share on other sites More sharing options...
Zelandeth Posted April 16 Author Share Posted April 16 3 hours ago, rattlecan said: So the rear panel isn’t Duraplast like the other panels then? 1 hour ago, captain_70s said: I believe the main body shell is steel with a skim of Duraplast over the top. If you strip a Trabant of the Duroplast bits what you're left with looks remarkably like a miniature version of the base frame skeleton the Rover P6 is built around. Front and rear panels are non structural steel, I'm guessing simply because the moulding would be excessively complex to make in Duroplast with the various cutouts and such. The inner structure is a (surprisingly rigid) framework including the sills, floorplans, roof frame, window surrounds, front and rear wheel tubs, door apertures, front bulkhead, and boot floor. Everything else is then attached to that. P6: Source: http://www.roverp6parts.com/history.html Trabant: No idea where I originally found that one. Here's a (crap) photograph of one stripped to the shell which original surfaced on Pinterest somewhere. For such vastly different cars it's almost uncanny how similarly the very basics of the inner structure have been penned. P6 is obviously vastly more substantial, but you get the idea of what I'm saying. auntiemaryscanary, bobdisk, rainagain and 6 others 9 Link to comment Share on other sites More sharing options...
Zelandeth Posted Saturday at 00:51 Author Share Posted Saturday at 00:51 I've noticed that the AC in the Partner has started to get a little noisy. It's still functioning, but sounds to me like the expansion valve is feeding vapour which would suggest we're low on charge. Let's see what the gauges say. Disclaimer here: I used to help out a HVAC technician looking after a bunch of gear on and around the farm I used to live next door to - but I've zero formal training in the field, and what I have learned I'm rusty on to the tune of probably more than 20 years at this point! I can usually look at things and figure out roughly what's going on though. I do keep half pondering looking at getting certification in that field, as if you like hands on stuff it's great as it involves a bit of everything. Though sadly as with just about everything in life I find interesting or have an aptitude for I think I'm probably about 30 years late for the technology I'm happiest working on to be in mainstream use. Back on topic...Standing pressures first. Smidge under 60psi. Definitely a smidge on the low side, I'd be expecting to be seeing nearer 70-80 with the car being warm. Running (and stabilised). We're definitely short on gas. Low side isn't really too bad, but with an expansion valve throttling things that's kind of to be expected until the charge gets critically low. High side though tells the story, I'd be looking for probably somewhere in the region of 150psi even with how cool it is today. I was able to get the head pressure up a tiny bit by applying an artificial load by putting the system into recirculation mode with the heater on full, but it's definitely short on gas. You can't really fully diagnose a system like this purely with a simple set of gauges like this, even with a full set of temperature probes etc you're never going to be charging this by pressures. Correct procedure is to recover the charge then weigh the proper charge in (assuming it passes a vacuum test - ideally you'd pressurise the system with dry nitrogen and do a *proper* leak down test, but that takes time and I wish you luck finding a garage that will). So I'll be getting her in this week to get the system recharged. GrumpiusMaximus, LightBulbFun, GlenAnderson and 1 other 4 Link to comment Share on other sites More sharing options...
SiC Posted Sunday at 14:52 Share Posted Sunday at 14:52 ATS Aircon regas offer: https://www.groupon.co.uk/deals/ats-euromaster-7 WELCOME discount code for a new account gets an additional 15% off Apparently Zelandeth 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now