Jump to content

Zel's Motoring Adventures...Jag, Citroen, Mercs, AC Model 70 & A Sinclair C5...20/09 - BX Missing Part Replacements, Jag Alternator Issues...


Zelandeth

Recommended Posts

Updates!

So, shortly this will be off to a new home...

IMG_20180115_162335_scaled.jpg

IMG_20180115_162307_scaled.jpg

IMG_20180115_162344-scaled.jpg

...having been in my ownership since brand new.  She's been an absolutely cracking little car and I'll be really sorry to see her go.  Cue the next three months of my mind going "did I do the right thing?" which always happens.  However last time the car moved prior to yesterday when I went to get it cleaned was about eight weeks ago.  Prior to that was about a month before that...it's just not been getting used.

If I was sensible, I'd just have sold it on the open market.  However I'm not sensible - and I despise the faffing around with timewasters that always seems to come from selling cars other than through forums like this - let's not even speak about eBay or Gumtree...So instead I wound up agreeing to do a trade for a project car.  While one that needs quite a lot of work done, it's one that's hopefully in the gaining value slowly over time bracket by now - and more importantly - will actually fit in my awkwardly narrow garage while still allowing you to get past it to get to the chest freezer that lives at the back.

So what's the project?

This is!

accf2.JPG

accf1.jpg

IMG_20180110_161401.jpg

Yep...It's an Invacar.  Well..technically it's not...it's an AC Model 70.  Or at least it used to be before it was hacked about to turn it into a tug that was used on a caravan park.  Hence the rear panel having been hacked about to accommodate a tow hitch (removed since the photo was taken), and the entire rear wheel tubs and arches having been sawed off to allow the comically oversized (Daimler!) wheels to be fitted.  Of course you can't fail to notice that the entire bloody nose is missing too...We've no idea.  Best guess is that it got damaged and they decided just to hack it off to make accessing the front wheel etc easier rather than repair it.  Oh...and the wiring loom has been royally butchered in quite a few places as well...so that will need repair.

The floor also has taken on the appearance and structural integrity of a soggy teabag.  This of course made me seriously doubt that the underside was going to be anything like intact, which would have immediately written the project off in my eyes.  However having a closer look...

IMG_20180110_155448.jpg

...showed that much to my astonishment that the chassis is sound as a pound.  Nothing that even looks vaguely suspicious and you think might make that sickening "scrunch" sound if poked...just solid.  There's a tiny section of one of the front outriggers (which I assume are just crash structure) which has a teeny tiny hole in, but poking it with a screwdriver (well...key) failed to make it any bigger, and even so it's an easy repair even with my limited welding skills.

The engine was apparently last running in late 2016, and the vehicle was driving then (albeit without any brakes).  So hopefully it shouldn't be too hard to get running.

Importantly, aside from the obvious bits of bodywork, it's complete.  There are quite a few things missing in the photos obviously, but the seller has them safely stashed away, and they will come with the vehicle.  Even more importantly, it already has a V5C with it, so I shouldn't have to go through the faffing about with the DVLA.  There will apparently be quite a few spares thrown in as well.

My rough plan at this point is as follows:

[] Get it running...I know this is probably a silly place to start...but let's face it, we've all done it.  We want to hear the engine go first.  It's also useful to know that bit does work when you're stuck at some impasse later on and want to set fire to it.

[] Remove body from chassis.

[] Repair floorpan and any bits of the chassis that look in any way suspect.

[] Rustproof the snot out of it.

[] Rebuild braking system.  I figure this will be easier to do with the body separated as access will be a bit easier.

[] Reassemble.

[] Repair damage to rear body and wheel arches.

[] ...Hope that by then I've formulated a proper plan to deal with the front!

Current theoretical plan is hopefully to be able to team up with someone who's got a Model 70 with good bodywork and take some moulds from that to allow me to recreate it (probably in several parts).  This could also prove handy for other owners who might have smashed corners etc.  Either that or find another scruffy front body section somewhere that's repairable and available for me to graft on.  The rear wheel tubs I'm currently thinking will wind up being adapted from Reliant bits most likely unless I'm lucky enough to come across a donor for bits of bodywork - which seems unlikely given that it seems that there are already more rolling chassis around than bodies to go on them.

We all know what they say about plans though - they never survive first contact with the enemy.

Whatever route I take to getting it done, it should definitely be interesting!

A big shout out to Dollywobbler for bringing these little cars to my attention.  Until his thread on the duo he's got hold of I'd never heard of them.  I decided on sight of that that I really wanted one, so started poking around a bit, expecting to maybe find one in a year or two...stumbling over a viable project less than an hour from home this quickly was at the very least unexpected.  There was no wish to seem like a copy cat or to steal any of his thunder - this just happened to work out in a way where things fell into place rather more effectively than I'd expected.

Expect a shedload more photos when it's delivered, hopefully at some point this week or next.

Now off to resume frantically trying to clear space for it in the garage.  I know I've got enough actual square footage there now - just need to play Tetris with the remaining content so I can actually fit the vehicle in it!

Link to comment
Share on other sites

Haven't really started digging for bits yet.  That's step two.

 

The rear wheels, while looking suitably mental (and I do reckon it would look ace with the arches extended to match) need to go for two reasons.  Firstly that they will make getting past the thing in my garage a nightmare - the fact that these are so narrow is one of the reasons I've been attracted to them.  Secondly is that they're not directly fitted to the hubs - they've been welded onto the original wheel rims underneath.  Fine for dragging stuff about in a yard - but I rather doubt the precision with which they're centred for use at anything north of 10mph, and I don't like the idea of dealing with losing a wheel in something that already only has three.

 

It's one of those cases where I honestly think it looks a lot worse than it really is.  It's structurally sound, has been running relatively recently and aside from the obvious GRP bits is pretty much all there.  It just looks like something out of Mad Max.

 

Body wise, I've not discounted the idea of (at least until something more model appropriate turns up) finding someone breaking a Robin/Rialto and seeing if I can hack it about to fit.  Rear arches I reckon that's definitely the plan.

 

I've no illusions of this ever being made into a concourse example - it will bear many scars and visible evidence of hackery, but they're all part of its story - and I like that.  It also means I won't feel quite so guilty if I decide to make a couple of modifications to make it easier to live with.

 

While most of its miles will probably be to/from shows - I do fully intend for this to see use for occasional local journeys if/when I manage to bring it back to life.

Link to comment
Share on other sites

Bother.

Looks like my new fan motor is indeed innocent in my current uncontrollable blower speed issue in the Activa.  Got the meter out today, and the control voltage is sitting stubbornly at 4.76V irrespective of what the fan speed control is set to.

IMG_20180117_145959.jpg

Why do I get the impression that the control unit that I need to get to next is going to be hard to get at...

Link to comment
Share on other sites

Haven't really started digging for bits yet.  That's step two.

 

The rear wheels, while looking suitably mental (and I do reckon it would look ace with the arches extended to match) need to go for two reasons.  Firstly that they will make getting past the thing in my garage a nightmare - the fact that these are so narrow is one of the reasons I've been attracted to them.  Secondly is that they're not directly fitted to the hubs - they've been welded onto the original wheel rims underneath.  Fine for dragging stuff about in a yard - but I rather doubt the precision with which they're centred for use at anything north of 10mph, and I don't like the idea of dealing with losing a wheel in something that already only has three.

 

It's one of those cases where I honestly think it looks a lot worse than it really is.  It's structurally sound, has been running relatively recently and aside from the obvious GRP bits is pretty much all there.  It just looks like something out of Mad Max.

 

Body wise, I've not discounted the idea of (at least until something more model appropriate turns up) finding someone breaking a Robin/Rialto and seeing if I can hack it about to fit.  Rear arches I reckon that's definitely the plan.

 

I've no illusions of this ever being made into a concourse example - it will bear many scars and visible evidence of hackery, but they're all part of its story - and I like that.  It also means I won't feel quite so guilty if I decide to make a couple of modifications to make it easier to live with.

 

While most of its miles will probably be to/from shows - I do fully intend for this to see use for occasional local journeys if/when I manage to bring it back to life.

Joe Mason was selling Reliant shells for £1 a few years back. He might let you have one?

 

https://classics.honestjohn.co.uk/news/general-news/2015-06/fancy-a-reliant-bodyshell-for-gbp1/

 

https://www.carandclassic.co.uk/user/ccts1650/

Link to comment
Share on other sites

The wheel arch sections should be easy enough to create molds for if DW will allow; polish and wax his one to within an inch of its life, daub mold release over the rear arches then follow it with gelcoat and several layers of resin and cloth. The rear valance would be easy enough too, although I think a nose cone may be a little ambitious...

Link to comment
Share on other sites

The wheel arch sections should be easy enough to create molds for if DW will allow; polish and wax his one to within an inch of its life, daub mold release over the rear arches then follow it with gelcoat and several layers of resin and cloth.

 

Pretty much my thinking in terms of how to do it, though I'm missing the whole wheel tubs, not just the arches.  So probably going to aim to sort that first, then come back to worry about the outer arches.

 

Rialtos and later Robins both used 12" wheels didn't they, so the profile would be in the right ballpark.

Link to comment
Share on other sites

Pretty much my thinking in terms of how to do it, though I'm missing the whole wheel tubs, not just the arches.  So probably going to aim to sort that first, then come back to worry about the outer arches.

 

Rialtos and later Robins both used 12" wheels didn't they, so the profile would be in the right ballpark.

I think it was just Robin's that had 12 inch wheels. 

Link to comment
Share on other sites

This is cracking stuff. I hope the distributor is not seized. If it is, leave well alone...

 

The body on mine really isn't suitable for moulds, as the paint is absolutely terrible. There's simply nothing to wax. The spares car is in a right state, but may already have been claimed too. It's a sad fact that there are more chassis out there than bodies, so don't rule out the idea of doing something daft with it. I suspect a Reliant body will be too heavy and wide though.

 

They're full of interesting engineering though, so I look forward to seeing how you get on with it.

Link to comment
Share on other sites

I know there are a few folks out there who have these, so finding one with a good body to get a mould from isn't necessarily a problem.  The seller (who's helpfully closer to home) also has a few there of older models, so it's not impossible that I could use one of those - To be honest I'm not really worried about having absolutely period correct wheel arches.

 

It's actually a real shame that this has been hacked about, as it's otherwise in bloody good condition.  No cracks/chips in a lot of the usual places, and it doesn't look to have ever been painted.

 

Given that the spares car you've got looks to be restorable body-wise I'd feel bad ripping it to bits - especially given the aforementioned comment about chassis vs bodies numbers.  If I'm going to cannibalise a body to restore mine I'd really rather it be one that's beyond redemption.  As mentioned though, even a really smashed up front end is a better starting point than I've got so far.

 

I think if nothing else turns up I'll probably look at starting out with a Reliant nose, then chop a section out the middle to bring the width down to sensible levels, then piece it together.  It'll probably look awful but should serve its purpose until I come up with a better solution.

 

I'll be leaving the distributor well alone!  I know the engine has run with the timing set where it is relatively recently, so potentially fiddling with it will be waaaaay down the to do list - after it's been soaked in Plusgas for about a year.  Or five.

Link to comment
Share on other sites

Hello Zel,

 

Your fairy godmother here! Maybe?

 

I’m sure we can do something to help but you’ve got to keep it real.... No need to be so purist that it ties you in knots but the little blue beasties should be just that, no turbos, no comedy makeovers and no other front ends would be my advice..... but at the end of the day it’s your property or are you just its custodian for a while of one of the most historic of vehicles....?

 

Will be in touch :-)

 

Mark

 

post-24414-0-93029500-1516214808_thumb.jpeg

Link to comment
Share on other sites

That's quite useful to see in itself as it shows me how they were originally contoured - looks like they cut away directly above that outer curve when they hacked my rear body away - which in itself actually might make smoothly integrating the replacement glass fibre easier.

 

Mechanically it'll not be having anything stupid done.  I might go as far as electronic ignition and things like that which simply make it easier to live with.  Will probably sling a stereo of some description under the dash too so I don't die of boredom when I get stuck in the inevitable traffic jams around here.

 

Any non-stock looking front end will purely be in the interests of getting the car actually working.  If at a future date I manage to come across something usable to restore it to looking as the factory intended, that will be used.  I'm trying to be realistic though, and especially in the early days it may well be a case of "using what I can get" to get it on the road initially.  I suspect this car may see several facelifts!

 

Out of interest, the tube with the alloy cap on it immediately in front of the white cap (which I assume is the oil filler), what is that?  Crankcase breather?  Just slightly concerned if so at how much gunk (and water...) may have got into the engine on mine over time if that's been missing for a number of years as appears to be the case.

Link to comment
Share on other sites

That's quite useful to see in itself as it shows me how they were originally contoured - looks like they cut away directly above that outer curve when they hacked my rear body away - which in itself actually might make smoothly integrating the replacement glass fibre easier.

 

Mechanically it'll not be having anything stupid done.  I might go as far as electronic ignition and things like that which simply make it easier to live with.  Will probably sling a stereo of some description under the dash too so I don't die of boredom when I get stuck in the inevitable traffic jams around here.

 

Any non-stock looking front end will purely be in the interests of getting the car actually working.  If at a future date I manage to come across something usable to restore it to looking as the factory intended, that will be used.  I'm trying to be realistic though, and especially in the early days it may well be a case of "using what I can get" to get it on the road initially.  I suspect this car may see several facelifts!

 

Out of interest, the tube with the alloy cap on it immediately in front of the white cap (which I assume is the oil filler), what is that?  Crankcase breather?  Just slightly concerned if so at how much gunk (and water...) may have got into the engine on mine over time if that's been missing for a number of years as appears to be the case.

 

My assumption is crankcase breather. Do you have a copy of the manual? I have a PDF.

Link to comment
Share on other sites

Documentation received, cheers!

 

First time I've seen the choke referred to in a carb diagram referred to as the "strangler" in a long time!

 

Does indeed appear that my engine is currently missing its PCV valve/cap.  Hopefully it's in a box somewhere - even more hopefully the sump isn't full of water or have (or has had) anything living in it...If the worst came to the worst and engine replacement is probably one of the easier things to source...but I'd rather not have to faff about with that nonsense.

Link to comment
Share on other sites

  • Zelandeth changed the title to Zel's Motoring Adventures...Jag, Citroen, Mercs, AC Model 70 & A Sinclair C5...20/09 - BX Missing Part Replacements, Jag Alternator Issues...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Broadsword
      I think the Broadsword fleet has become sufficiently complicated to merit a combined thread so that gradually all new additions will appear in one place.
       
      As of Sunday 17th March the situation is interesting.
       
      Two Citoren Xantias (remember the white Xantia of Excellence is for sale people!)
      http://autoshite.com/topic/34699-w-reg-citroen-xantia-20-hdi-xantia-of-excellence-%C2%A3999/
      http://autoshite.com/topic/34596-citroen-xantia-double-madness-rust/page-2
       
      A turquoise XJR6 pending overdue-collection (need that gone now!)
      http://autoshite.com/topic/34003-jaguar-xjr6-double-madness-double-sold
       
      An XJS 3.6 manual project which will get in high gear soonish. Wont be a keeper but will be fun getting it back to something presentable. Drivers fantastic!
      http://autoshite.com/topic/34664-jaguar-xjs-36-manual
       
      A Range Rover P38, which is turning out to be really rather good.
       
      And to mix things up even more I'm off on a collection caper today. Had first refusal on it and was expecting it to come around in a year, but things soon changed and no way was I going to pass up on it. It may well render the second Xantia redundant as I've got a really good feeling about this motor.
       
      In the meantime here are some snaps of the Range Rover. As usual it was a car I said I would probably never buy due to their reliability*. I have said the same of Jag XJR, XJS, XK8 and I have had all of those now. Basically the moment I declare buying a particular car is impractical or improbable, I end up buying one.
       
      Things to note on the P38. It's a nice colour with tidy body. The EAS has been removed. It runs and drives lovely and it doesn't have enough electrical problems to hinder progress. The main one is the driver's side window not working, but that should be fixable. I've tried changing the outstation, that didn't fix it. Might be wiring under the seat. Other than that I bought it and took it for an MOT the very next day, and it passed. Since then it had what seemed like a battery drain, but since unplugging the RF thingy for the remote locking and putting on a proper lead-acid battery, which the car can actually charge, unlike the modern lead-calcium batteries, it has been perfect. I will treat it to a full service soon.
       
      Stay tuned for the latest collection later today!



    • By Fumbler
      To mark the genesis of my fleet project thread I here present my new car: a 1997 Nissan Micra Shape-


      It really looks that good. There is a reason for this: its previous owner was an old lady who loved the thing so much so she made every effort to keep it in good shape. It originally came from Fleet in the GU postcode which suggests to me it was bought by the present dealer at auction, hence arriving down here in Kent. Before seeing the car I checked its MOT history and its only fails were thanks to broken stoplights, which shows me that it was very well cared for. I suppose an example of this was that on the last MOT, an advisory was a corroded rear silencer. The silencer on the car when I saw it was new. Methinks the lady wanted to keep it as good as possible. It was kept in a garage and so all the bumpers and black trim are very black and the tyres are in very good condition. Spare never used! Also included a free Dettol first aid kit from 1997.
      This car has 15000 genuine miles on the clock. We clocked over 15000 during the test drive! The lady owner really only trundled around her village in it and the MOT shows that it only did some meagre miles between tests. This, of course, came at a price. We saw a cherry red Micra from 2002 at the same dealer. Paint was shoddy and when they washed it the boot had massive sections of bare metal and it wasn't very happy. This car, however, is in fabulous condition and there was no contest between the two cars- it really is that good, inside and out. Immaculate interior, driver's airbag, cassette player... all there and all functioning (apart from cassette thanks to new battery and failed display). This meant that I bought it for £1600, £100 over what was my uppermost limit, but I knew I wouldn't see another like this that was in as good shape for a fair while. It was priced very ambitiously, at £1990, so I'm content in the fact I managed to slash a few hundred off the price. There wasn't that much paperwork though. All the dealership received was the logbook with 3 service stamps from 1998, 1999 and 2000, the radio key pass, a National Trust sticker, and the original paperwork holder. I suspect the old lady died and had her car auctioned, and the massive file of paperwork is now someone's egg carton, along will everything else she owned.

      As always, this car isn't exactly in showroom condition. While the inside is great and the floor is solid, and the underseal is in great shape, the not undersealed parts need a small looking at. Mainly the rear of the driver's side sill. It's really the only bubbling on the car. I suspect a well aimed stonechip managed to fester over the wintery salted roads, making it rust even more. It's around the size of a 5p piece, and will give me the opportunity to spray the insides of the sill with some chain oil to prevent any further corrosion. Behind the fuel tank there are a few rusty joints- places where the spraygun cannot get paint onto- which some Vactan and Dynax should put to rights. Alternator belt looks original because of the cracking and Nissan badges and will need doing soon as well as the front plate. As much as I like the 90's font and original dealer surround, the dishevelled R and general water ingress is a persistant MOT advisory. It could be the MOT station being strict (and most likely is considering there's a Saxo down the road with far worse blackening), however for the sake of peace of mind and all that, I'll get a new one made. The rear has already been replaced indicating this has happened before.
      All in all, I think this is a nice plucky motor. I'll have it by the end of the week; just got to sort out tax, insurance, and it's going to have an MOT. As part of the deal it's getting the MOT and an oil and filter change which will be something ticked off the list. It has some love scratches and chips here and there, but it drives well, is stiff and controllable, and should make out to be a nice summer project!
    • By BorniteIdentity
      This week, for the first time ever, I felt old. I have sciatica which swaps from one side to the other, arthritis in one hand and what I think is the beginnings of IBS. On top of that it took me 2 weeks to remember a registration number that once would take me 2 seconds, and I forgot my parent's wedding anniversary.

      I'm only 32.

      Shit. No I'm not. I'm 33. I forgot that too. (Genuinely)

      So, it's about time I committed some of my tales to paper. Well, a shonky server... but that's the best you can do in 2016.

      First up, a list of the cars I've owned (as best as I can remember) in chronological order.

      Main Cars
      1985 VW Polo Formel E. C158 TRT. This was given to me even before I passed my test.

      1991 Rover Metro S. J801 TAC. Bought about 3 months after I passed my test as I was convinced the Polo was about to shit its gearbox.

      1987 Volvo 360 GLT. D899 CBJ ___ Managed three months in a Metro before the small car and smaller petrol tank became a bore.



      Ford Mondeo and Honda Civic Coupe by Bornite Identity, on Flickr
      1999 Ford Mondeo Zetec. V384 DBJ. Still the most I've ever spent on a car. It was 3 years old and cost, from memory, about £8,000. Just think of the Rover R8s you could buy with that now!

      1987 Volkswagen Golf GTI 8v by Bornite Identity, on Flickr
      1987 Volkswagen Golf GTI D79 CVV. I very nearly bought a MK1 Golf 1.1 but was persuaded, by my father amusingly, to buy this one from a different friend. From memory I gave about £500 for it, and sold it to some racers later that year for about £300. Amusingly, 16 year later I'd sell the Hartge wheels that came with the car for £530.

      1999 Toyota Avensis CDX by Bornite Identity, on Flickr
      1999 Toyota Avensis CDX. V781 GDP. By far the best car I've ever had. Bought in 2002 for £5300, it had previously been a company car at British Telecom. I ran it from 62,000 to 174,000 before it became surplus to requirements. A German chap bought it on ebay for about £500 and drove over to collect it. Hero.

      2001 Ford Mondeo Zetec by Bornite Identity, on Flickr
      2001 Ford Mondeo Zetec. Y821 EEB. I should have loved this car. I gave £500 for it in 2008 which was stupidly cheap by anybody's standards. It needed 4 tyres (which actually was nice to pick good ones for once) and a coil spring. Sadly, it was just bill after bill after bill. I sold it and promised to never own another Ford. I nearly succeeded.

      1998 Nissan Almera by Bornite Identity, on Flickr
      1998 Nissan Almera GX Auto. S58 NLO. My late Grandfather's car and, upon reflection, my first proper attempt at bangernomics. I bought it for £500 in 2008 from the estate and ran it for well over a year and 30,000 miles. It was also my first automatic which, whilst a bit dumb, did lock up into overdrive and give a good 36 mpg no matter how it was driven.

      2004 Ford Fiesta 1.25 LX and 2006 Ford Focus 2.0 Ghia by Bornite Identity, on Flickr
      2004 Ford Fiesta Zetec. AG53 BWL. My wife's car which I ran for a couple of years when I bought her a Focus as a wedding gift.

      2003 Rover 75 by Bornite Identity, on Flickr
      2003 Rover 75 Club SE. AX53 BFA. This is where my career as a serial car buyer really began. Ignoring all of the warning signs I decided to press a K Series into a daily 100 mile commute, which it did with aplomb. This wasn't actually the car I set out to buy, the one I'd agreed to buy OVERHEATED ON THE FORECOURT whilst I was doing the paperwork. Consequently I couldn't leave fast enough and bought a different car later that day.

      2004 Toyota Avensis T30-X by Bornite Identity, on Flickr
      2004 Toyota Avensis T3-X. KT53 DWZ. Sensible head back on, I decided to get back into something I trusted when my 3rd son was born. This was a lovely car, but not without its problems. The VVTi oil burning issues are well documented and do frequently occur. Ironically, this was less reliable than the Rover it replaced! Despite fearing the worst and 3 months off the road, the new owner has just MOTd it.

      1999 Toyota Avensis SR by Bornite Identity, on Flickr
      1999 Toyota Avensis SR. V263 GDP. Back into bangernomics territory again. The last MK1 Avensis I had was the best car I'd ever had, so I hoped to replicate it with another T22 Avensis. This one came up for sale in my favourite (and rare) colour with a numberplate sequential to my previous car - so it was meant to be. I still have this now, and tomorrow it will tick around to 185,000 miles having been bought by me at 100,500.

      Side Bitches

      1974 Morris Mini 1000 by Bornite Identity, on Flickr
      1974 Morris Mini 1000. GEL 517N. Well, I always wanted one - and was young, free, single and well off at the time (2003). A memorable trip to buy it when I called my new girlfriend by my ex girlfriend's name 20 miles into a 200 mile weekend away. She's never forgiven or forgotten but we're still friends. Oh - and married.

      1977 Ford Capri II GL by Bornite Identity, on Flickr
      1977 Ford Capri II 1600 GL. SMY 675R. I can't remember why I bought this, other than I thought it'd be amusing. It was bought from Norwich for £350 and was perfectly well behaved for the 8 months that I had it (other than a flasher unit expiring). I remember being shocked just how much the windscreen would ice up inside, and duly sold it in November to a guy who was going to drive it daily! It's still alive and now, apparently, black! (Update - it's now silver!!!)

      1989 Volvo 340 DL by Bornite Identity, on Flickr
      1989 Volvo 340 DL. G67 AVN. I bought this for £80. Unbelievable. It was utterly bloody perfect. I wanted to do a banger rally which is why the guy gave it to me so cheap. I'm still yet to do that rally, but no longer have the car. I sold it for about £300 to a family who were clearly down on their luck who, I hope, still have the car.

      1996 Toyota Granvia by Bornite Identity, on Flickr
      1996 Toyota Granvia. N775 JEV. My wife and I decided to increase our numbers further and, with our 4th son on the way, larger transport was required. We quickly realised you can either have 4 children and no apparel, or apparel and no children. After trying a very tired Mercedes Viano, the Granvia was found for 1/4 of the price and it's still here 2 years later. I can safely say that we'll never sell it - it really is another member of the family.

      1993 Mercedes 190e by Bornite Identity, on Flickr
      1993 Mercedes 190e. L795 COJ. I've admired these cars since I was a child. In fact, one of the very few toy cars I still have from my childhood is a Mercedes 190e. Regular readers of "Memoirs from the Hard Shoulder" will know what a PITA this car has been since day 1, but I get the feeling it's a keeper. We'll see!

      1983 Ford Sierra Base 1.6 by Bornite Identity, on Flickr
      1983 Ford Sierra Base. GVG 510Y. Not explicitly my car, but it should be documented here for reference. Oh - and the V5 is in my name. The story is online for all to read as to how five of us acquired what is believed to be the only remaining Ford Sierra Base. Make a brew and read it, it's a fantastic story.

      1982 Ford Sierra L by Bornite Identity, on Flickr
      1982 Ford Sierra L. LCR 503Y. I accidentally won this on ebay for £520. Upon reflection, I shouldn't have sold it - but short stop of saying I regret it. I could never get truly comfortable driving it and, in fairness, I could scratch my Sierra itch with the base if I wanted. Sold it at a stupid profit of £1250. It is believed to be the oldest remaining Ford Sierra in the UK.

      1979 Volvo 343 DL by Bornite Identity, on Flickr
      1979 Volvo 343 DL. DBY 466T As you'll see above, I'd had a 360GLT as a younger lad and fancied one of these earlier cars. The variomatic is, frankly, terrible but amusing. This car has just 8000 miles on the clock and inside was absolutely timewarp. Sadly, the huge bill for the Mercedes 190e cylinder head rebuild meant I had to sell this car shortly after acquiring it. Since then I've had a bit of money luck, and now realise I didn't need to sell it after all. Typical.

      I think that's it. My arthritis is playing up even more now. I've left out a few cars that were actually my wife's, but if I find pictures will add them in at a later date. I'll run this as an ongoing thread on cars and what's happening.

      Current SitRep:

      Purple Avensis: Just about to click over 185,000. Minor drama this week when an HT lead split but otherwise utterly fantastic, fantastically boring and boringly reliable.

      Granvia: Just done 1000 miles in a month around Norfolk, 6 up with suitcases. 31mpg achieved on the way up which is good for an old tub with a 3.0 Turbo Diesel on board. ODO displaying 175,000 which is a mix of miles and kilometers. Say 130,000 miles for argument's sake.

      Mercedes: Being a PITA. It's had the top end completely rebuilt after the chain came off. Now needs welding to pass another MOT and the gearbox bearings are on strike. It's about to go into the garage for winter until I can stomach it again. 151,000 miles on the clock.

      Sierra bASe: Still on sabbatical with AngryDicky who only took it bloody camping in cornwall! Legend.
    • By Foz
      A new day, a new project
       
      In a moment of madness I agreed to go half with my brother on a 1951 Morris Minor MM named Geraldine.  The madness is that I already have a "project" which I have already posted on here some time ago (not much has happend to that), and I still don't have a garage to store any of them in... anyway the Minor was delivered yesterday and we spent most of the day moving a shed and fence to get the car round the back of my house, there is nice hard concrete floor to work off of back there.  
      Well, about the car.  its rotten as usual, the door bottoms have completely gone and I suspect there is some rot in the "internal" door mounting panels as you can hear crunching noises when putting force onto the doors themselves.  the rear floor pans have detached from the rest of the car just below the back seat and I think a rear suspension mount is going to be needing replacement.  Luckily most panels for this car you can buy to fix most of the problems.  the unusual thing is that the sills and front floor pans seem to be fine (I think they've been replaced before) and the chassis/outriggers seem ok, a little crusty here and there but from what I can see sicking my head under the car it seem ok (not great, not bad).
       
      On the plus side the car has had the 1098cc engine and gearbox from a Minor 1000 fitted and it runs and drives.  sadly no history with the car except the old style logbook.  Not sure if the engine has been converted to unleaded but I will be checking that when the engine eventually comes out.  Gears seem ok but again a full service will be carried out.
       
      Plan is to hopefully within the next year build a concrete sectional garage around the car (concrete base already there luckily) and buy a body roller to do a complete body restoration.  luckily the bumper mounts seem solid and so hopefully use these to mount it to body rollover jig.
       
      This will be our first restoration for us but I think you cant get any simpler than a minor and its a good car to "learn" on. (fingers crossed), Though if anybody has any knowledge to pass on  I would be eternally grateful. 
       
      Well here's some pictures of where the car stands now, work wont start straight away (I still need to buy most equipment, welder etc)  but any progress will always be updated here. 




    • By Tickman
      First some background:
      I was brought up with no car interest, a car was transport and nothing more which resulted in a selection of poor cheap cars being the cars of my youth.
       
      Fast forward many years (just over 9 years ago) and I have a wonderful* Vauxhall Vectra estate to carry us about. Unfortunately it is crap and throws fault codes at us with nothing being there when it is checked (even at Vauxhall)
       
      As Mrs T is the main pilot of this chariot with the two little miss T's on board, it has to go.
      The hunt is on for the new steed to safely and comfortably carry the family around. I have a company car at the time so big journeys are not an issue.
       
      ebay is my weapon of choice to find the new family car. It has to be good value cheap for no other reason than I am tight.
       
      Weeks of research with lots of cars that are too expensive and too far away for easy collection end up in my watch list.
      Finally a possible is spotted in Fife. I go and have a look and find a poor looking but solid car. One previous owner and lots of history.
       
      The auction was to end on the Saturday at midday, we were going to be out! I decided on how much I was willing to gamble on it and on the Saturday morning I put in my max bid but straight away it went to my max bid, I was winning but it had three hours to go with no room for me to go up! We went out anyway.
       
      I spent the next three hours kicking myself for not bidding more while we were out as it was the first car I had seen that fitted my criteria. Fate was in charge.

      On returning home I go straight on ebay to find 'Congratulations.............'
      For the grand total of £500 I had just won this fine vehicle!
       

       
      It has 5 months MOT and after fitting seat belts in the rear for the girls car seats it is pushed into daily service.
      My gamble and subsequent use results in a perfectly reliable car that actually does what it is supposed to do.
       
      Even more importantly Mrs T loves it so a win all round.
       
      All my cars have names (most are earned over a bit of time) and this one is called 'Gwendolen' ( G reg car and from Wales originally. I hate the name but I am not going to argue)
       
      That sums up part one, more will be along later (probably much later)
×
×
  • Create New...