pauldoubleyou Posted August 17, 2017 Share Posted August 17, 2017 thought it would be funny, loud and annoying to the neighbours to put an AUQ out of a VRS into a stripped out lupo shell. engine is about to go in so thought i would share some pictures. Shite or not shite im not so sure. So far the dash has gone back in now i have put the diesel pedal box in (for the hydraulic clutch) and installed the FBW accellerator pedal. Just need to remount the fusebox as i had to pull the original plastic box it was in due to the larger accellerator pedal. LostnotFound, cobblers, Vince70 and 31 others 34 Link to comment Share on other sites More sharing options...
andy18s Posted August 17, 2017 Share Posted August 17, 2017 How are you doing the electrics?Swapping the loom over or getting a "stand alone" mini loom? Link to comment Share on other sites More sharing options...
pauldoubleyou Posted August 17, 2017 Author Share Posted August 17, 2017 The looms, being VW, arent that dissimilar. The plan is to depin the original Lupo ECU plug and install the VRS ECU plug making sure all the correct wires go in the right places. Unplug the Lupo engine side loom from the plug, install the VRS one, boom. Only really needs a few things wiring up to start it and work one wire at a time from there. Im unlucky in that actually as because i have the shittiest possible Lupo as a base car the ECU plugs dont match. Some do and a quick depin - repin can have you done and dusted. Lastly map out the immobiliser, secondary air systems and sensors and airbags. Link to comment Share on other sites More sharing options...
Parky Posted August 17, 2017 Share Posted August 17, 2017 Well I approve, putting big engines in little cars is a winning strategy as far as I am concerned. I assume/hope you are incorporating some braking upgrades! Minimad5 1 Link to comment Share on other sites More sharing options...
nacho man Posted August 17, 2017 Share Posted August 17, 2017 180bhp should be rapid in a stripped shell! You going to get it mapped at all? The 1.8T is a great engine really aint it, a bit characterless, but can reliably get the arse kicked out of them all day long. Its just the strainer that can block on neglected cars. Link to comment Share on other sites More sharing options...
Lacquer Peel Posted August 17, 2017 Share Posted August 17, 2017 Steel wheels, mismatched hubcaps and an 'SDI' badge please. forddeliveryboy, nigel bickle, tooSavvy and 16 others 19 Link to comment Share on other sites More sharing options...
fordperv Posted August 17, 2017 Share Posted August 17, 2017 They are rapid little things with a 20v in, an aquantaince used to have one it went like a scalded rat it caught many people out Link to comment Share on other sites More sharing options...
dougiefourspeed Posted August 17, 2017 Share Posted August 17, 2017 This is all good stuff. I've had half an idea in my head to drop a 20vT into a 6N Polo 'cause I've always liked the shape of them. But that's a job for another day. Link to comment Share on other sites More sharing options...
SherpaMog Posted August 17, 2017 Share Posted August 17, 2017 Respect to the skills, yo! Let me know if you sell in the future please please. pauldoubleyou 1 Link to comment Share on other sites More sharing options...
sporty-shite Posted August 17, 2017 Share Posted August 17, 2017 You had me up until "stripped out" It needs full standard trim, including giffer tartan blanket on parcel shelf, steelie and National Trust sticker. Still would, though. Good work. Lacquer Peel, Asimo, dougiefourspeed and 3 others 6 Link to comment Share on other sites More sharing options...
Asimo Posted August 17, 2017 Share Posted August 17, 2017 .......my favourite 20 valve engine Aston Martin, mat_the_cat and Lacquer Peel 3 Link to comment Share on other sites More sharing options...
Sigmund Fraud Posted August 17, 2017 Share Posted August 17, 2017 Nice work, Lupos with massive engines are excellent ! The Autoshite way would be to keep it looking like a completely stock 1.0E, "old age pensioner" or "teenage girl" paraphernalia are optional. Nicola H and Lacquer Peel 2 Link to comment Share on other sites More sharing options...
They_all_do_that_sir Posted August 17, 2017 Share Posted August 17, 2017 Nice work, Lupos with massive engines are excellent ! The Autoshite way would be to keep it looking like a completely stock 1.0E, "old age pensioner" or "teenage girl" paraphernalia are optional."Powered by fairy dust" Sent from my SM-A510F using Tapatalk Link to comment Share on other sites More sharing options...
pauldoubleyou Posted August 18, 2017 Author Share Posted August 18, 2017 Just checked in on this and didnt expect so many replies. The stripped out option is purely to get the wieght down to make it more horrible. Ill be putting on a remap anyway in order to map out a few sensors so im hoping to get about 225bhp. Add that to the weight of nearly fuck all and it comes up with a lovely power to weight ratio. SDi badge and steel wheels will be going on. Maybe even one of those family decals. Ideally id like to keep it as stock as possible but im going to have to put some kind of bonnet raisers or venting on it as the turbo will be so close to the bulkhead. Oh and its all done in a garage, not a post or competent mechanic in sight. Lacquer Peel, Ghosty, The Moog and 5 others 8 Link to comment Share on other sites More sharing options...
fordperv Posted August 18, 2017 Share Posted August 18, 2017 When the bonnets raised, get ready for the people as you pull up to tell you your bonnets open Link to comment Share on other sites More sharing options...
unclecalzone Posted August 18, 2017 Share Posted August 18, 2017 used to be one of these around the area I live, it was very quick little car indeed. Also had a good reg on it - "S3 upo" Link to comment Share on other sites More sharing options...
spartacus Posted August 18, 2017 Share Posted August 18, 2017 I like this, keep it updated please. I'll be in the queue of and when you come to sell. pauldoubleyou 1 Link to comment Share on other sites More sharing options...
Vince70 Posted August 18, 2017 Share Posted August 18, 2017 I wish I had your mechanical skills that looks an amazing I even like the colour.I can't work out why VW never raided the parts bin and built one themselves and called it a Lupo R as I'm sure it would of been the ultimate hot hatch that would of sold by the tens of thousands with no weight and plenty of go with cheap tried and tested components it would have been a winner. Hendry 1 Link to comment Share on other sites More sharing options...
pauldoubleyou Posted August 18, 2017 Author Share Posted August 18, 2017 Tbh the car itself is like a tin can but definitely better put together than say, French cars of similar age and size. Pics from today. Finally got the correct engine mount bolts from the main dealer, pedal box fully in, heat shielding and clutch pipe in, dash and interior back in. Lots done! Sent from my iPhone using Tapatalk Dave_Q, Heidel_Kakao, Coprolalia and 2 others 5 Link to comment Share on other sites More sharing options...
pauldoubleyou Posted August 18, 2017 Author Share Posted August 18, 2017 Forgot this but also managed to fuck the airbag ring. Looks like I'll be rolling sans airbags. One thing I want to point out is that when I stripped this I have a bit of an OCD for keeping everything. I mean everything, screws, washers, the lot. And I also have boxes of them from breaking cars or removing bits from the last ten years. What this means is most jobs can be done for free and parts are readily available. The Yorkshireman in me is proud of my tightness Sent from my iPhone using Tapatalk Sigmund Fraud, Coprolalia, stripped fred and 11 others 14 Link to comment Share on other sites More sharing options...
pauldoubleyou Posted August 19, 2017 Author Share Posted August 19, 2017 Progress today. Old drivers side mount removed, gearstick and centre console back in. Sent from my iPhone using Tapatalk Lacquer Peel, The Moog, Coprolalia and 4 others 7 Link to comment Share on other sites More sharing options...
Mr_Bo11ox Posted August 19, 2017 Share Posted August 19, 2017 Lifestyle Understatement Performance Optimism Lacquer Peel and sporty-shite 2 Link to comment Share on other sites More sharing options...
vaughant Posted August 19, 2017 Share Posted August 19, 2017 That will be mental. I have the Ibiza cupra version (polo 6n chassis) and even standard that flies. Looks like you're doing a grand job mate. Link to comment Share on other sites More sharing options...
andy18s Posted August 19, 2017 Share Posted August 19, 2017 Bit like this one? tooSavvy and Supernaut 2 Link to comment Share on other sites More sharing options...
tooSavvy Posted August 19, 2017 Share Posted August 19, 2017 ^^^ mmm.. Honda eater? TS Link to comment Share on other sites More sharing options...
pauldoubleyou Posted August 19, 2017 Author Share Posted August 19, 2017 Lifestyle Understatement Performance OptimismLag unnessecary, psi ooft Sent from my iPhone using Tapatalk Lacquer Peel and The Reverend Bluejeans 2 Link to comment Share on other sites More sharing options...
pauldoubleyou Posted August 19, 2017 Author Share Posted August 19, 2017 Looking at measurements it looks like I'm going have to notch the chassis too. Might do it both sides just for that additional wiggle room, first things first I still need to find a bloody engine crane as I have no idea who has mine and nobody is owning up to it grr Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
inconsistant Posted August 20, 2017 Share Posted August 20, 2017 Excellent! I'm imagining the teenage girl 'my first car' version of Farmtruck. Link to comment Share on other sites More sharing options...
Pillock Posted August 20, 2017 Share Posted August 20, 2017 Here's three Lupos with 1700bhp between them. Two 20VTs, one Diesel Link to comment Share on other sites More sharing options...
Lacquer Peel Posted August 20, 2017 Share Posted August 20, 2017 Interesting that the diesel is the quickest Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now