There's nothing here yet
Zel's Motoring Adventures...Jag, Citroen, Mercedes & AC Model 70 - 27/09 - Invacar Interior Improvements Underway...By Zelandeth
Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.
I figure that my little varied fleet might bring you lot some amusement...
1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
1989 Saab 900i Automatic.
1987 Skoda 120LX 21st Anniversary Special Edition.
1985 Sinclair C5.
2009 Peugeot 107 Verve.
Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...
Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.
Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.
Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...
Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.
Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.
Then we have possibly the world's scruffiest Sinclair C5...
Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.
Finally - again, I really need to take more photos of - we have the little Pug 107.
Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."
I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
What does £191 on eBay get you?
An E36 BMW 316i with two sets of wheels, a DAB radio, an MOT until December, 110k miles on the clocks, a slightly* fucked back box and a bit of grot on the driver's side sill.
This is co-owned between me and 17-Coffees and our plan is to do a light restoration and just generally piss about with it. It's actually really nice to drive, and is surprisingly brisk for only being a 1.6.
Yes, the alloys are getting sacked off ASAP as it came with the original steel wheels with all-but-new Toyo Proxes on them!
Strangeangel's Citroënic Shenanigans (featuring the Autoshite BX, Ami Break and some bikes) 27/9 More BMW battling...By strangeangel
I thought I'd start a thread for this as I'll probably end up asking all sorts of questions, given that this is my first 'proper' Citroën.
So... the ground clearance lever won't go all the way to the highest setting (all others work), which is bad 'cos the book says I need it to do that in order to check the LHM level. It feels like something's seized, so I don't want to force it. Any ideas for a plan of attack would be much appreciated.
Next up are the wheels. I now have a set of 205 pepperpots that have just gone off for powder coating & I need to get some tyres for them. The handbook says the car should have 165/70R14s on, the wheels came with 185/65R14 on. Any thoughts about what size I should get please? Cheers.
Hi all, new to the forum. Thought you might be interested in what I've got myself into
I'd been after my first classic car for a while. If it's big and made in the 70s I'm interested. Looked at few things like P6s, Zodiacs, Victors, SD1s and various other things. Problem was I didn't want to spend a boatload of money on something that looked alright but underneath was actually a total heap. The solution was to buy a complete heap in the first place and spend the money fixing it.
So in January I went ahead and bought this from a colleague at work who was moving away and needed to get shot of it.
It's a part finished restoration (I prefer not started) and it needs a whole load of help if it's going to stand any chance of using a road again.
It's right up my street. Granada Coupes are quite odd and certainly stand out from the norm.
It still has the original engine, box, interior and most trim.
It came with loads of panels I need to repair it (mostly original Ford stock).
It came with so many spares I could probably build a few Granadas and still have stuff left over.
It was cheap.
Most of the front end has been cut off.
Most of the body structure is quite rotten.
It's going to take me ages.
I work at a restoration company and my boss kindly allows me to keep the car there. So I've got access to all the gear I need to restore it. I've been busy on the car for a while now so will post more pics over the coming days.
Well, here we go again. I bit the bullet and bought me this.
It's still up at the lot right now, there will be a miniature Collection Thread embedded in this thread when I go fetch it. Hopefully if the weather's good, that'll be this weekend.
So, what is it?
As the title suggests, it's a 1951 Pontiac Chieftain.
It's got a flat-head straight eight hiding in the engine bay, 4.4 litres of it. It's bolted to a 4-speed Hydra-Matic Drive gearbox. No torque converter on this one, just a fluid coupling. 116 horses at a screaming 3700 RPM, 240lb/ft at 2000. It idles at 375 RPM. Redline just shy of 4k.
Did I mention it's quite big? Sixteen foot eight from end to end and it seats six people in comfort. Every door has a quarter-light, too. Comfort is provided by properly sized tyres and (quite surprisingly for the age of it) double independent wishbone front suspension. Steering is via worm/wheel steering box so is moderately direct and the brakes are hydraulic drums all round. Modern and scientific!
It's an honest example; looks to have had a "restoration" about 15-20 years back and the rust is coming through the seams and filler. The bottoms of the door skins have gone, the bottom of the A-pillars have gone (the front doors, on a single hinge a piece still open and close with one finger!) And it's got a couple holes and blebs in all the places you would expect.
Not much electrical works. It needs to be completely rewired because someone has "converted" it to 12V. Thankfully it was originally negative ground so that's a good start. Gauges and such can be driven from a 6V bucking converter.
Engine has had some work done on it- starts and runs nicely with very little greb coming out of the exhaust. It's got a few gaskets that need replacing and the tappets need some major adjustment, the gearbox engages gears correctly, the steering is okay but has a lot of slack in the center and the brakes work well, dont sink or feel spongy but need adjustment.
More to come. I'll post up more pictures when I get it home.