Jump to content

Schaefft's Bargain Barge Extravaganza - A8 gone, 540i Update


Schaefft

Recommended Posts

On 6/11/2020 at 11:05 AM, Schaefft said:

You might be able to, Im fairly sure I cant as I cant even get quotes for my '92 S-Class, which sucks as most of these cars would be dirt cheap to insure. Might be because of my German drivers license, who knows. I'll have to check again when the time for an MOT comes closer.

£82 with Performance Direct for a 500 SEC for me, not even a classic policy, no usable NCB but I am old and clean so to speak. I went with them because they were the cheapest Confused dragged up outside Whitley Bay P.O. when I was getting it legal to drive home. I will have to go classic next time, it deserves better. 

Link to comment
Share on other sites

  • 2 weeks later...

The key for the Merc finally arrived this week. Turns out it had been on the dealers desk for what must have been weeks, as I called them up a week ago only to hear that someone wanted to call me when it arrived, but didn't. We then scheduled a call for Monday, which also didnt happen, until I called them on Tuesday for someone to finally come around and take a photo of the VIN to make sure Im not actually stealing someone else's car. At least the guy was impressed by seeing a Senator B AND Toyota Celsior on one and the same driveway.?

50051755392_3981786ea3_h.jpg

Anyway, with the key here (its actually just a key blade oddly enough, I guess the price was too good to be true...) I managed to open the car and retrieve the actual key, and maneuver the 2 ton paper weight out of the way to move the Audi onto the drive. As you can see, the drive is just wide enough to fit a big body S-Class and move a bin past it. Perfect!

50051461506_3260d24695_h.jpg

I did replace the S8's fuel door last week as you can see below, I didn't want to do major work on the street though so I could only start doing bigger jobs on it now. The trunk lid was first, and what a difference it makes! I've transferred every component from my old lid to the new one and with so much electronics going on in it, there were quite a few things to disassemble. Wanting to do the job properly, I chose hard mode and even kept the factory clip in zip-ties intact...

Corrosion and FILTH:

50051770212_930acc979a_c.jpg50051518906_ab25dba927_c.jpg

Things used to change that. No sponsors I promise.

50051765247_5752e2eb7c_b.jpg

Done and so much better:

50050938788_ced377bf35_c.jpg

50050941153_e3214432dc_c.jpg

Work was commencing on Thursday to rectify the trunk issue:

50051504271_e86ac851cb_h.jpg

That sure is a lot of stuff to move over to the new lid...

50050929828_7a674a8d3f_h.jpg

The first casualty. This bulb holder was so corroded that the wiring loom just took the contacts with it. Need to order one from a breaker.

50051748307_ee91c40070_c.jpg

Trunk lid off. The S8 is now a Ute!

50051487636_f18dd689f6_h.jpg

With the new trunk lid on comes the challenge of putting everything back together properly. The wiring loom was the biggest issue as it was routed through a fairly small hole through a very narrow section of reinforcement structure. 

50051495166_62cb1556a5_h.jpg

In the end I decided to use the sunroof drain cleaning tool I remembered I had which was made to get through narrow passages. I attached one end of the wiring loom to it and just pulled it back through the internals of the lid, it really worked perfectly for that job.

50051493371_778cb287d6_h.jpg

And voila, the fruits of my labor, with the previous paint situation on the left. The terrible paint on the back was the biggest letdown of the car's appearance, and for just 45 quid (before selling the old trunk lid, someones might buy it for 20 quid, who knows) and a few hours of work, you really couldn't ask for more. Perfect paint match, perfect fit (although I spent at least an hour trying to match the shutlines on each side, and its still not 100% there). The rest did fit perfectly though...

50051508986_d25a733f19_c.jpg50050919488_50b899cb88_c.jpg

The next big job will be replacing one of the front wings which suffers from the same clearcoat issues, I believe most of the frontend needs to come off for that. I'll use the chance and polish the headlights at the same time. Once thats done the car should only be a wash away from being very much presentable. I'll also start ordering all service items once I have confirmed that they havent been done by the previous owner.

Link to comment
Share on other sites

Thanks guys, wish the weather was nicer, progress would be a little quicker. Its just too windy today to work on the cars. I did however spend a bit of time after work recently to clean up the Senator before swapping its space with the Audi. And boy did it make a difference! I've never really went as far as detailing a car properly although I had most products here. As I don't have a polisher I did stick to the products that can be applied by hand, and if the results of those efforts are any indication, I can really make most of the paint on my cars look like new again. I only took shitty pictures but I can honestly say that a proper wash, claybar and polish/wax made a different like night and day. I think I might need to get a proper polisher now.

Some before and after shots:

50054493966_e08c007880_b.jpg

50054735092_ebc166c273_b.jpg

50053917988_62127e6d9f_b.jpg

50054730607_9a52a2f2ce_b.jpg

50054744667_0194e6cd16_b.jpg

50053908378_670c788d5c_b.jpg

Its amazing what a bit of time and effort can do. The results arent perfect, especially with some of the clearcoat issues the car has, but its a huge improvement and will protect the paint for a little while.

50053913478_f411cd2e78_b.jpg

50054728087_c3e660d10f_b.jpg

50054746887_d7dc9368e1_b.jpg

Link to the stuff I've used. I've chosen it because it was well reviewed, and it really is good stuff. Just make sure your paint is properly cleaned before applying it.

https://www.amazon.co.uk/Meguiars-G191016EU-3in1-Wax-473ml/dp/B07N9FD88N/ref=asc_df_B07N9FD88N/?tag=googshopuk-21&linkCode=df0&hvadid=404356773027&hvpos=&hvnetw=g&hvrand=13825260766483437742&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1006948&hvtargid=pla-899477943072&psc=1&th=1&psc=1&tag=&ref=&adgrpid=86859211820&hvpone=&hvptwo=&hvadid=404356773027&hvpos=&hvnetw=g&hvrand=13825260766483437742&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1006948&hvtargid=pla-899477943072

Link to comment
Share on other sites

Some more progress on the S8 has been made! It now has a new(er) shiny front fender with much improved paint, and its headlights are looking much clearer again. I've also found out that the car must have been in a minor collision bsometime around 2010/2011 as the passenger side headlight and all foglights are much newer than the rest of the car. I think that might explain the bad clearcoat issues this car had on its front bumper, fender and hood (and trunk lid for some reason), some of these panels might have had a respray in the past which simply didnt hold up as well as the rest of the car. I've also used the chance to check the timing belt, which is very conveniently located behind two easily removable panels, and from what I can tell, things look pretty good there and dont need any urgent attention:

50080847956_b06e545957_b.jpg

50080265043_324f25d7bf_b.jpg

50080845816_7af457cbe4_z.jpg50080262438_699290cd39_z.jpg 

Most of the front end had to come off to remove the fender. Interestingly enough, Audi made it very easy to remove the front bumper which is only held in by two easily accessible bolts. Remove those and it slides out. The problem is that the bolts are steel, the threaded blocks they thread into seem to be aluminium. Two different metals and enough time will cause issues as you can see below.

50080197833_8b36e58bdc_z.jpg

Yes, the bolts was seized enough to strip part of the thread. I honestly expected it to snap any moment while undoing it, and only did so because I had no alternative, unlike on the other side where nothing blocked the impact absorber of the bumper from sliding out.

The headlights would normally come out very easily too. But once again rusty bolts meant that removing them took absolute ages, partially due to accessibility issues. The drill bits I bought to drill out problematic screws were borderline useless. I was about to just rip the headlights out when I realized that they too are attached via some kind of rail, and the bolts didnt necessarily had to come off in this particular case.

50080200763_a14f861e2e_h.jpg

Once the headlights were out I was able to access another set of bolts to remove the bumper completely. The fender removal did require some further disassembly but there wasn't really anything too tricky there.

50080774701_bf13a2cbae_h.jpg

The replacement fender went on without too many issues although the old washer marks do not line up with where the fender needs to sit now, Im not sure whats up with that. The bumper doesn't quite want to line up with it either (fender lines up with everything else despite the washer marks), something that wasnt the case before, but that issues can be dealt with at another time when it needs to be painted or replaced.

50080271938_163abc408e_h.jpg

I used the chance to clean, polish and reseal the headlights, although the newer one of the two didnt require much polishing action at all, so I left it. I'll put them back in the car tomorrow after work, hopefully thatll be the last time for a little while I'll have to deal with things up front.

50081017767_9d5976d5c5_h.jpg

50081039742_a4bc99f0dd_h.jpg

Here's a comparison between the two after the polish. Still not quite perfect but much better than before.

50080768476_db95cc1b87_h.jpg

I've also ordered new spark plugs, oil and filters. Both the plugs and filter were OEM items and needed replacing. I can't imagine these being original so someone must have spent some money at the dealer in the past to have the car serviced.

50080790981_3b37e393b4_z.jpg50080788836_caa9cf5193_z.jpg50080207608_7af9091e82_z.jpg

Also, have some better Senator shots, I really need to clean up these side skirts now that I'm looking at these photos. Also I still need new rear doors...

50081011842_6128f122a3_h.jpg

50080184813_eb836dffb6_h.jpg

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...
On 7/14/2020 at 10:37 AM, sdkrc said:

I went to view a unit near Glasgow last night and the guy was breaking a ming blue 3.7 sport if that's any use. He's got some other interesting shite too

I've actually found him on Ebay and was going to get the panels I needed from him, only for him to realize that his breaker wasn't Ming blue, his daily driver was. Unfortunately he wouldn't sell me parts of that...

On 7/14/2020 at 11:30 AM, dollywobbler said:

Great stuff. That Senator is an absolute stunner. Wonderful colour.

It really is a beautiful car and I'd love to drive it more. Still open for you having a go in it, it would be a good incentive to get it MOT'd to be honest.

 

Anyway, there are some great news! Not only has the S8 been reassembled weeks ago now (Im actually running out of things to do, as you can see below I can now play Gran Turismo inside the car!), the Corona is back from the dead (somewhat appropriate to the current developments...). I was planning to order the coolant outlet through Amayama, only to find out that they couldn't source it in Japan either. Instead I only received a gasket and thermostat I ordered at the same time, but not without paying ridiculous shipping, VAT and customs charges for them. At least I have a genuine JDM cardboard box now.

Through a ton of back and forth and parts number cross-referencing I finally figured out that the first couple of years of the Rav4 did use a very similar part, with the biggest difference being a missing hole for the coolant temp gauge sensor. There is a hole that is currently sealed by a blanking plug, but the thread diameters of that and the sensor are different, the sensor thread is significantly smaller.

50229263538_66f5fefe5d_b.jpg

Any help or suggestion would be welcome, Im not sure if we have any fabricators within our rows?

50229260528_a2a4854c9f_h.jpg

50229902001_4021298fda_h.jpg

Considering how long its been off the road, the car really drove amazingly well. Everything inside worked, I was quite surprised to see that this car even came with a factory in-dash CD player, back in 1989! My high spec Toyota Celsior didn't even have that. I'm going to order more parts for it soon just to get the basics done. Hopefully we can get it through an MOT soon, I'd love to be able to take it home and properly clean it up.

And as promised, GT2 in the Audi. A 360hp 4.2l V8 should be sufficient to power a PS1.

50229955351_5430d1d995_h.jpg

50229313238_202c7fd7cd_h.jpg

Link to comment
Share on other sites

1 hour ago, Schaefft said:

There is a hole that is currently sealed by a blanking plug, but the thread diameters of that and the sensor are different, the sensor thread is significantly smaller.

If you are able to identify the two threads (most likely metric or metric fine) then any half-decent machine shop should be able to turn you up a small brass bushing to go in there.   You might even find that you can just drill and tap the plug that is fitted and turn it into an adaptor bushing.

Link to comment
Share on other sites

23 hours ago, Talbot said:

If you are able to identify the two threads (most likely metric or metric fine) then any half-decent machine shop should be able to turn you up a small brass bushing to go in there.   You might even find that you can just drill and tap the plug that is fitted and turn it into an adaptor bushing.

Im more worried that it might just not be worth their time!

Started to work a little more on the S-Class today. Im currently in the process of replacing the rusty passenger side wing with one I picked up last year (the other side was replaced a year ago). The replacement needed a few repairs itself, this was the first time I've done any actual body work "repairs" where I had to replace missing metal. The damaged attachment points were replaced /reinforced using fibreglass, another first for me. Even bought a proper respirator which was long overdue. The result is very sturdy and will hopefully last a long time.

50233344893_07666da930.jpg50233329138_c8e54c9e30.jpg

Rust cleaned, Kurust and zinc primer applied:

50233988211_bf26634516_h.jpg

50233342298_5eec92d02b_h.jpg

I still need to give it a proper polish to make the clear coat shine again, but I'm quite happy with the result. The base coat could be more even as I ended up painting a much larger area than initially planned. I will call it a job done though as the difference in shading is not too noticeable from most angles. Definitely not in this photo.

50233336903_fc1ab8953b_h.jpg

Also naturally, there was more rust underneath, particularly around the spots the clips for the wheel arch liner are stuck into the body. I'm planning to have the front bumper professionally welded soon, I will ask them to patch the hole in the passenger side apron and hopefully replace the missing bumper bracket on the drive side. Unfortunately it cannot be ordered from Mercedes separately....

Crusty bumper bracket on the passenger side in the lower left corner. That one should be savable.

50233339773_95ff85377b_h.jpg

Its still odd to me how localized some of this corrosion is. It really seems like some areas just werent designed well for longevity when it comes to corrosion, while other areas still look brand new.

Link to comment
Share on other sites

  • 1 month later...

And once again 1.5 months have passed without positing an update (apart from my latest collection thread here). Which doesn't mean nothing has happened, quite the opposite!

The front wing went back on the Merc without any issues, With a final polish it turned out pretty well although there is a spot in an area I cant even remember painting that looks like it has some internal clearcoat issues now. If anything this confirmed that I won't  be doing any painting of larger surfaces in the future lol.

50419240642_1f6c8aa558_h.jpg

50418374658_30d2353a82_h.jpg

The car has also been booked in for having the front bumper professionally resprayed now. The front bumper mounts will be replaced at the same time. Most of the parts needed were available from Mercedes, some of them I am still waiting to receive from a Dutch breaker, hopefully they'll be here soon. I'm trying to save some labour costs by doing most of the disassembly/reassembly myself, fortunately its incredibly easy to take the whole frontend apart, the bumper is held on by 4 easily accessible bolts. It just reconfirms the feeling I got much earlier that this car was designed to be maintained and worked on, everything just feels so well thought out.

While in Germany I've also bought a few bits for the BMW and Audi. I replaced the busted bootlid lock and bulb holder on the S8, something that I planned to do for a long time, it just didn't happen as I couldn't find a breaker here in the UK who was actually capable of taking my money and sending me the parts. Got it all sorted now. Also, ordered many months ago and collected from my parents, I have finally have THIS:

50418396493_57bd300c26_b.jpg

Yes, its a fantastically preserved Nokia 3610i, the newest phone that was compatible with the phone mount installed by Audi. These phones apparently were also factory fitted in Mercedes cars from around that time. It wasn't easy to find a 3610i in decent condition that didnt have Mercedes branding on it, how funny would that have been...

I've also fixed my folding mirrors by replacing the relay, its the second one I've found damaged in the passenger side footwell, not even by corrosion either. Im starting to wonder what happened to that relay holder in its previous life. Have a look inside, it more of control module than a simple relay.

50419131161_59f25aa120_b.jpg

The E39 has received some (completely unnecessary) goodies, too. I've installed the floor mats I ordered when I was stuck at  Düsseldorf central station and they make a huge difference. Super nice quality and so clean that I don't wanna step into the car anymore. I've also replaced the gauge cluster bezel which has been scratched up and had broken mounts, it cost me over 40 Euros but makes a huge difference.

50419175716_534ee56922_h.jpg

50419340802_2b3b22ca6f_h.jpg

All scratches up, but also with broken tabs, most likely from someone trying to remove it without removing the screws first.

50419159721_8bbf8534cc_h.jpg

The dial switches for head- and foglights were all broken up internally as well, with bits rattling around. A bit of glue and they are perfect again:

50419153226_c98b64edef_h.jpg

All sorted, hopefully this has solved all the rattles coming from the instrument binnacle, too. Its another great example of a previous' owners screw-ups having long lasting effects on the quality of the car, not the actual production quality of the car itself.

50418458568_9ee34896ee_h.jpg

After 6.5 years Ive also finally replaced the last bit of "customization" that was left from the previous owners (typically, everything was covered in M-Logos before). I wanted to replace the handbrake lever boot for ages but kept forgetting about it, naturally its different from RHD E39s. Much better now:

50419165711_f7b2c0728b_b.jpg

50418472018_4057d620fb_b.jpg

Last but not least, I finally replaced my Depo aftermarket taillights with genuine Hella Facelift ones today and it really makes a difference. Despite their similar design the quality difference, especially when lit, is like night and day. Retrofitting FL taillights isnt easy on the E39 if you want to do it properly. Hella offered a Retrofit kit (including LED ballasts) back in the day, the problem being that you usually can't tell those lights apart from the actual BMW FL lights which are wired differently. You also have to drill new mounting holes and literally bash your car's body with a hammer (where you can't see it fortunately) to make them fit. Lovely.

Dirty and pre-hammer bashing:

50418453273_b68b7cc275_h.jpg

Clean and post hammer bashing:

50419316422_6eccb921c6_h.jpg

Depo aftermarket on the left, Hella retrofit kit on the right. Bootlid and rearbumper replacements are waiting to be installed at the right time.

50419134591_21a0e07eef_h.jpg

So much better looking. It took me years to finally get to this point, glad its finally done. Gaskets were all replaced as well.

50418493763_aee32548fb_h.jpg

Oh, and I fixed this ancient rust caused by a fender bender before I bought the car, Surprisingly, it never got worse. I used some bumper putty to fill the dent, I'm curious to see how well it'll last. If it works on flexible bumpers it should work here, too. The jacking points need welding eventually, I'll have it all properly fixed at that point.

50419209636_51ed08c013_b.jpg

50419198481_07933ee513_b.jpg

50419192121_eb69df51e7_h.jpg

Professional spray booth:

50418522813_6af3262c61_h.jpg

Fuel filler bonus bit.

50419202611_a19c0c3621_b.jpg

50419194646_d3894d702b_b.jpg

 

Link to comment
Share on other sites

  • Schaefft changed the title to Schaefft's Bargain Barge Extravaganza - New Parts Everywhere
  • 2 weeks later...

Only two weeks this time, not too much progress so far.

I've started taking the front end of the BMW apart to replace the hood latches and release cables. I took the headlights out at the same time to finally deal with the lose trim pieces right underneath which were bothering me for ages. Somehow I fell into a rabbit hole and started to fix a few rust spots in the engine bay which there were plenty of. Turns out the car might have been in a larger collision than initially expected as I found bodyfiller on the wheel housing covering up dents. Oddly enough there were tiny rust holes in areas where you'd never expect to find them as well, especially on a car that has been relatively decent rust wise with exception of the jacking points more recently. I've checked the chassis rails and they look perfectly fine, I knew it was in a minor front end collision before but a dented wheel housing would indicate a much larger bang. Really odd!

50498878396_1072f7feea_h.jpg

50499027642_b27a8c123a_h.jpg

Also finally replace this hose. Almost 40 Euros for a replacement, and that was by far the cheapest price you could get for it.

50499033977_2563a68f23_b.jpg

I've finally received my bumper mounts for the Mercedes from Holland which will finally get worked on next Monday, apparently the guy working on it had to quarantine. The car was already arriving a week late because I had to quarantine myself.

50498156963_c74c2f3d3a_h.jpg

 It took me about 2 hours to drill out the spot welds and get rid of all the junk metal that the seller just left on them. Despite the extra cuts left in them by the seller these should do perfectly fine once welded on and rust proved.

50499024717_b1770ed655_b.jpg

On top of the work above I had the garage check on the parking brake as there was pretty much zero engagement. They've found a broken coil spring in the process which I had suspected for a long time. They also told me the car needs new parking brake shoes (which is true) and new pads (possibly) and discs. Now Im really not sure about the latter, the discs look fine to me and compared to a set of brand new ones, theres no indication that they might be worn down. Or am I mistaken there? What do you guys think? You can find a photo of brand new discs at the bottom.

50499032202_c23013c234_z.jpg

s-l1600.jpg

Also, dont do this, it hurts a little.

50498165803_02e32e1aac_b.jpg

Link to comment
Share on other sites

Received a refund from the Ebay seller, bought a thread tapping set instead. This is the first time I've used it, and it worked surprisingly well!

50530019646_9e082b777b_z.jpg50529288808_880a7a5d89_z.jpg

Proof:

50530175282_d079253203_b.jpg

Reassembled everything, put the headlights back in, cleaned the hood latch mechanism and things are all bueno again.

50530009426_d28c96d3bb_h.jpg

Bonus Mark VIII puddle light action. They work surprisingly well, even without puddles!

50530177257_3699e41979_h.jpg

Link to comment
Share on other sites

On 10/26/2020 at 9:06 PM, Ian_Fearn said:

Sorry, I forgot it was a Lincoln! I saw the picture of the Aurora and it just reminded me of it. I’ll check to see if it’s still there next time I’m over that way.

Awesome, its not like I want to buy it, Id be glad to help getting it back on the road though!

Link to comment
Share on other sites

  • 1 month later...

Just some quick updates. The Mercedes came back from the bodyshop after having its bumper repainted and mounts replaced. I've picked this place in particular as it has a very good reputation according to the reviews, and is a certified VAG approved bodyshop. I had an insurance claim fixed there years ago and they did a great job (although they did paint around the stick-on temporary LED lights leaving a clear silhouette...). It took a while because of Covid but was able to pick it up about 2 weeks ago.

I am having some mixed feelings about the results though. On one side its miles better than it was before. On the other hand I dont think the paint match is totally amazing, especially on a color (uni grey) that should be pretty easy to match. Its a smidge too light, but it also has a much more matte finish. Do you guys think this could be polished to a slightly glossier finish?

As always, things are a little more noticeable up close.

50660416993_c37a9927bd_h.jpg

On top of that I noticed some pretty odd pitting on the rear bumper that I cannot recall seeing there before. The bumper had some scrapes that could have been easily polished out, but the pitting will definitely not come out. I asked about their photos/footage of the car before it went in (so they know in what state the car was before they started work) but its all taking quite a long time for them to just send some before-images.

50661238782_33a1541c28_b.jpg

On top of that I need to take the front bumper off again (something I wanted to avoid) because the chrome trim wasn't put on before installation despite me telling them to do so ( I disassembled everything before to avoid them breaking anything and saving some labor).

All of this just leaves me with mixed feelings about a garage's work once again. I haven't found a single place in Newcastle (or Gateshead) yet that really did a perfect job. I know these cars are anything but pristine but I really got the feeling thats its too often 2 steps forwards, one step back, because things haven't been done properly or communication wasn't as good as it should be. Or do I just expect too much? I have a ton more paint work that needs to get done on my cars and Im really wondering where I can find a place that really just does an excellent job.

Link to comment
Share on other sites

No, I'd be a bit pissed off with that too. Sadly, I've had exactly the same experience with bodyshops, any work I've had done has always not quite been right. The only time  the quality of the work was spot on was when someone rear ended my OH's old Rav4 years ago and it went in to a Polar Ford bodyshop as part of the claim. When it came back, I genuinely couldn't tell it had been painted or repaired - that was similar to the Merc in that it had a different colour and finish on the bumper and arch extensions.

Link to comment
Share on other sites

A few minor updates. I couldn't move the S8 out of the drive as it suddenly refused to start. Turns out the engine/starter earth point wasn't doing its job anymore, fortunately that was an easy fix. I melted some wires while jumping the starter solenoid but aside from that it didn't cost me anything. Replacing a faulty starter would have meant removing most of the front end and lowering the subframe in one of these...

50686610863_59d7568f38_b.jpg

Whoops:

50687361511_63e98d293a_b.jpg

I've also put the chrome trim back on the Merc's bumper. Upon further inspection I noticed that the front wings are missing some bolts. Now I wonder why that might be... I can't find them in the car so I guess the bodyshop just lost them somehow. Oh joy...

50687442737_40ed57758c_h.jpg

50686606518_e7bb28af39_h.jpg

In other news, someone has listed a Lincoln Mark VIII engine for sale in the local US car group. Knowing that no normal person would list such a rare engine, I asked if there were more Mark VIII parts for sale. As you can imagine, driving two of what must be a handful Mark VIIIs that are on the road in the UK makes the hunt for spare parts quite adventurous.  Normally all of this stuff needs to be imported, which makes finding a body panel or set of wheels particularly expensive. And since the seller was located literally just 20 minutes from my house, I agreed to pop over yesterday morning and see what other interesting stuff the seller might have.

Turns out the place was a bit of a gold mine. Not only did the seller have the entire front subframe/suspension/steering assembly for sale, apparently he still had bumper covers and lights for the car, too. It blows my mind that this stuff is just hiding in a garage literally minutes from my place, yet these cars are as rare as they get, with about a dozen at most in the entirety of the UK. The seller also happend to have a set of original wheels (which I bought) and a few other random bits and bops that he would need to dig out first. Apparently he got this stuff about 12 years ago after breaking a car that was destined to meet the crusher, insurance wanted the shell crushed so he got as many part off of it before it was gone.

50687447182_797b7c8bee_h.jpg

There was plenty of other interesting chod strewn about. He had a mid 70s F250 with he swapped an XJ40 straight six into, an ex-Army Dodge Power Ram which also had a Jag straight six in it (the guy is a Jag specialist, hence his soft spot for Jag engines), a Kellogg Econoline conversion van (including glorious 80s wood built-ins), a bunch of XK8s, an XJS...

50687452042_d9c6645b1e_h.jpg

50687357436_437e31b8f4_h.jpg

Jag straight six in an F250? There you go!

50687450577_d6334e61b1_h.jpg

Inside of the Econoline:

50686614203_c6095f7e70_h.jpg

50687366586_2bc2306561_h.jpg

Last but not least, an almost immaculate '57 Bel Air he bought for 6 grand 20 years ago:

50687448172_1820c5bd0c_h.jpg

It really was an incredible place, and the owner was a fantastic bloke to have a chat about his cars and all kinds of things with, and Im hoping to go back once he dug out a few more pieces I might be interested in. It all reminded me of the guy selling a Buick Roadmaster locally last year. What many US car enthusiasts around here appear to have in common is a disdain for the US car club scene, which is the reason you never see this stuff. Somewhat understandable as most people showing up at car shows around here are not there for the cars but showing of their Corvette/Mustang/Challenger/Ram/Camaro or random cop car replica to be part of some kind of mainstream boomer cosplay scene, often without having much of a clue about anything. Not exactly what I'm into either...

Link to comment
Share on other sites

55 minutes ago, Schaefft said:

A few minor updates. I couldn't move the S8 out of the drive as it suddenly refused to start. Turns out the engine/starter earth point wasn't doing its job anymore, fortunately that was an easy fix. I melted some wires while jumping the starter solenoid but aside from that it didn't cost me anything. Replacing a faulty starter would have meant removing most of the front end and lowering the subframe in one of these...

50686610863_59d7568f38_b.jpg

Whoops:

50687361511_63e98d293a_b.jpg

I've also put the chrome trim back on the Merc's bumper. Upon further inspection I noticed that the front wings are missing some bolts. Now I wonder why that might be... I can't find them in the car so I guess the bodyshop just lost them somehow. Oh joy...

50687442737_40ed57758c_h.jpg

50686606518_e7bb28af39_h.jpg

In other news, someone has listed a Lincoln Mark VIII engine for sale in the local US car group. Knowing that no normal person would list such a rare engine, I asked if there were more Mark VIII parts for sale. As you can imagine, driving two of what must be a handful Mark VIIIs that are on the road in the UK makes the hunt for spare parts quite adventurous.  Normally all of this stuff needs to be imported, which makes finding a body panel or set of wheels particularly expensive. And since the seller was located literally just 20 minutes from my house, I agreed to pop over yesterday morning and see what other interesting stuff the seller might have.

Turns out the place was a bit of a gold mine. Not only did the seller have the entire front subframe/suspension/steering assembly for sale, apparently he still had bumper covers and lights for the car, too. It blows my mind that this stuff is just hiding in a garage literally minutes from my place, yet these cars are as rare as they get, with about a dozen at most in the entirety of the UK. The seller also happend to have a set of original wheels (which I bought) and a few other random bits and bops that he would need to dig out first. Apparently he got this stuff about 12 years ago after breaking a car that was destined to meet the crusher, insurance wanted the shell crushed so he got as many part off of it before it was gone.

50687447182_797b7c8bee_h.jpg

There was plenty of other interesting chod strewn about. He had a late 70s F150 with he swapped an XJ40 straight six into, an ex-Army Dodge Power Ram which also had a Jag straight six in it (the guy is a Jag specialist, hence his soft spot for Jag engines), a Kellogg Econoline conversion van (including glorious 80s wood built-ins), a bunch of XK8s, an XJS...

50687452042_d9c6645b1e_h.jpg

50687357436_437e31b8f4_h.jpg

Jag straight six in an F150? There you go!

50687450577_d6334e61b1_h.jpg

Inside of the Econoline:

50686614203_c6095f7e70_h.jpg

50687366586_2bc2306561_h.jpg

Last but not least, an almost immaculate '57 Bel Air he bought for 6 grand 20 years ago:

50687448172_1820c5bd0c_h.jpg

It really was an incredible place, and the owner was a fantastic bloke to have a chat about his cars and all kinds of things, and Im hoping to go back once he dug out a few more pieces I might be interested in. It all reminded me of the guy selling a Buick Roadmaster locally last year. What many US car enthusiasts around here appear to have in common is a disdain for the US car club scene, which is the reason you never see this stuff. Somewhat understandable as most people showing up at car shows around here are not there for the cars but showing of their Corvette/Mustang/Challenger/Ram/Camaro or random cop car replica to be part of some kind of mainstream boomer cosplay scene, often without having much of a clue about anything. Not exactly what I'm into either...

Is that Geodie webbs place at Penshaw ?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...