Jump to content

The Old Beige BX Progress Thread: 17th Feb 2021 - FIN.


Recommended Posts

Posted

New tyres?

 

Aye, and bulbs. I have a pair of new LED fittings if it needs them. Trailer light fittings are notoriously crap.

Posted
2. I have free use of a large, secure shed, loads of tools, work benches, and boxes of tat for repairs/bodgery (eg- bits of rubber hoses etc.), so it's a great place to work on a project. The BX is welcome to stay in there for a few weeks, or a bit longer. I am often free on Sundays...

 

Also, not too far away from here (near Keighley) is my tame MOT place.

 

 

My vote would be to take up Joe's kind offer of a berth at Castle_Cleland for a bit, given the points made above - obviously dependent on whether others are able/willing to make the trip to Malham.

 

I currently enjoy the luxury of only working Mon-Thurs, and would defo be up for working parties; I'm only a passable mechanic at best, but I don't mind weighing in and getting my hands dirty. I'd very much like to see this car back on the road :)

Posted

My vote would be to take up Joe's kind offer of a berth at Castle_Cleland for a bit, given the points made above - obviously dependent on whether others are able/willing to make the trip to Malham.

 

I currently enjoy the luxury of only working Mon-Thurs, and would defo be up for working parties; I'm only a passable mechanic at best, but I don't mind weighing in and getting my hands dirty. I'd very much like to see this car back on the road :)

I mentioned the idea of borrowing Dean_numbers or the bx of many shiters plates for a quick spin up the road but was out voted on count of it being a silly idea...

Posted

Car camping and tenting pitches are available here, but be sure your guy ropes are pegged in well, or you may be blown into Lancashire. I wouldn't wish that on anyone.

Posted

Right, as an 'owner' that is miles away, I'm out of the picture as far as tinkering goes.

 

Just shout if funds need to go in the pot.

 

Either that or I'd be quite happy to sponsor the purchase of a required part if that helps.

Posted

Holbeck, from your point of view, would you prefer it to return to Wigan soonish? Is that closer?

 

Also, so I don't have to wade through the old thread, who are the current "owners" please?

Posted

Give me an hour and I will look through all the messages I had about it.

There's literally only 4 or 5 of us owners.

Posted

I didn't register any interest in ownership on the last thread as I was off the forum for a while, but if the option's still open I'd like to take a share.

  • Like 2
Posted

Joe, I'm in Devon, so your Gaff is as good as Wigan.

 

I'm happy for the car to be anywhere where there are people enthusiastic to have a go at fixing it. 

 

I'll chip in for the expences, or pay for something specific if that helps.

 

(I would like a go in it at some point).

  • Like 3
Posted

If it finds its way oxon bound, or fancies a holiday when it's legal and fixed ill happily detail the fuck out of it, the paintwork is really good, I ciffed a small portion of the rear quarter and it responded well. Or if we have a shitefest next year that will allow it to be washed

 

I have no financial stake though I'm afraid, although slightly wish I had now after sitting in it for an afternoon!

Posted

Right.

 

According to my records we have only six people who expressed wish to part own the BeigeX after initial donation.

 

In no particular order:

  • samwhatfoolish
  • strangeangel
  • egg
  • holbeck
  • stillOrange
  • Cleon-Fonte

The pot of gold gathered stands at £65

  • Like 2
Posted

I think this car is staying in the North, so I will withdraw from ownership interest as six is also probably too many! I'm​ happy to continue to donate to any future crowd funding needs for this beauty.

Posted

I have no financial stake though I'm afraid, although slightly wish I had now after sitting in it for an afternoon!

I know how you feel Sam, I'm the same! Can't afford it and I'm only insured to drive the Rover though cause I'm a y00f.

Posted

Look what landed today from SVM hero RML_numbers:

 

post-1381-0-68593300-1496855473_thumb.jpg

 

Many thanks Adrian :)

It came quicker than owt off ebay ever!

  • Like 7
Posted

Will happily join in the valeting fun if it comes over this way a bit.

Posted

Right team, listen up!

 

Who fancies coming up here for a working party this Sunday?

Near Malham, BD23.

 

Arriving, say, late morning, until we've had enough... I have plenty of gear here, and willingness to assist in any way I can. I'd like* to see if I can get that fuel return sorted for you.

 

Now we have the sphere tool, we could have a go at that. Are the ones in the car suitable? How much LHM will we need? I think we have a bit from Beko now. It can't be that hard, I'm sure* HBOL will tell us all we need to know.

 

I want to keep the momentum up if we can, let me know your thoughts...

Posted

From when i did my xm's spheres oy a dribble of lhm came out, although if their buggared and full of lhm you might loose a bit, but ive never experienced that. But the level looked fine, so even if it's just low that half a bottle should be enough to keep it topped up until a full hydraflush can be done... The peek I had in the lhm tank showed bright green fluid so it shouldn't be too ancient, it certainly rose spot on

Posted

I'm at my daughter's birthday party on Sunday, so I hope for lots of pictures to keep me occupied through out the day

Posted

Yes, I'm in. I can bring some LHM too.

The brakes could probably benefit from a bleed, especially to increase the chances of a good first time mot pass. I only bought the last half bottle I had with me

Posted

Be careful with the bleed nipples. They shear off at the drop of a hat if you're not careful. Penetrating oil and gentleness required. Piss easy to bleed though. No pedal pumping here!

  • Like 3
Posted

Thanks for the title change, Jaz!

Glad you can come... I will send out location details to all potentials in due course.

Posted

The brakes felt ok to me so far, though we haven't been able to drive much more than walking pace so far due to TEH BOUNCE.

Considering what DW said, we should only touch them if we need to!

Posted

If we do end up bleeding the brakes I have a virtually endless supply of BX bleed nipples which I can bring up, which should come in handy as the old ones are almost guaranteed to be fucked. 

  • Like 3
Posted

Car camping and tenting pitches are available here, but be sure your guy ropes are pegged in well, or you may be blown into Lancashire. I wouldn't wish that on anyone.

2ceed75670126e8f82093944e4550317.jpg

  • Like 2
Posted

From when i did my xm's spheres oy a dribble of lhm came out, although if their buggared and full of lhm you might loose a bit, but ive never experienced that.

 

If they feel 'tight' on the threads as you are unscrewing them (assuming in low to depressurise the system) then it means that the diaphragm has burst and is pressurising the system still. So move your face well away as you loosen the final thread!

 

It's happened to me twice; both completely unexpected. The second time the sphere was only a year old (changing to fit comfort spheres) so I assumed the tightness was thread damage. I was spitting rainbows for hours!

Posted

If they feel 'tight' on the threads as you are unscrewing them (assuming in low to depressurise the system) then it means that the diaphragm has burst and is pressurising the system still. So move your face well away as you loosen the final thread!

 

It's happened to me twice; both completely unexpected. The second time the sphere was only a year old (changing to fit comfort spheres) so I assumed the tightness was thread damage. I was spitting rainbows for hours!

post-5612-0-27899600-1496867162_thumb.jpg

  • Like 10

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...