Jump to content
cobblers

Cobbler's's Talbot Express - Afterburner chinese heater controller

Recommended Posts

So I ordered new wishbones, bushes, balljoints for this sucker to cure the suspension squeak, which arrived today.

 

I ended up taking the van to work instead of the bike this morning what with it pissing it down, and guess what? suspension was totally silent. Seems that jet-washing all the crud out of the wheelarches must have cleaned the shit out of the bushes and quietened them down.

I'm sure the noise will come back though (or that's what I'll tell myself) cos I'm still going to fit the new tackle this weekend once I've done the lifters.

 

Anyway I was particularly pleased that I drove instead of rode in, as I got 20 minutes kip on the warm comfy rear bench waiting for the gaffer to turn up late and unlock to let us in. The rear heater is excellent!

I'd have been freezing my plums off doing laps of the carpark on my pushbike to try and keep warm otherwise.

Share this post


Link to post
Share on other sites

I just spent half the day fitting the new lifters etc etc. I took a load of photos and stuff which I might put up at some point but I'm pretty gutted right now.

 

With a nice new set of lifters all adjusted up perfectly has confirmed my fears that the engine is actually knocking it's fucking arse off and is shagged. The old lifters seemed OK when they came out.

 

I was kidding myself thinking it was anything else, really, but I thought that if the noise I heard when I looked at it really was "bottom end" then the thing would have kicked a rod out of the block long before now as it's done 400 motorway miles without getting significantly worse.

 

Anyway, now I have a few choices:

1: Recon engine costing £1600

2: 2nd hand "good" engine at maybe half that.

3: Have a go at rebuilding this one myself. I would need to build a shed in the garden to do this. I've rebuilt an engine before and it didn't end well, but I did that outside my nans house on top of her bin.

4: Cut my losses and sell / break it

 

Now I really like the van so I don't think I'll sell it. It's a cracking shell so it'd be a real shame to break it for parts, but right now I can't afford £1500 for an engine and frankly I don't fancy taking my chances with a 2nd hand engine unless I can hear it run because I'm not that lucky.

Share this post


Link to post
Share on other sites

Bastard, I am gutted for you.   I dread the moment with mine because I know how much these things cost to renew and how hard it is to find a good engine no matter what you spend.   Des of this parish did have a good motor for sale not too long ago - see if he still has it.  

 

Can you store the van somewhere, would be a shame to have to cut out so soon?

Share this post


Link to post
Share on other sites

Ah fuck man.  This is shit news. Is there no more reasonably priced lump thats a tried and tested "conversion"?

 

I know its not ideal but it'd keep it motoring.

 

Other than that, wait for a sunny week and give the rebuild a go.  Theres literally nothing to lose I guess?

Share this post


Link to post
Share on other sites

The van is taxed and tested etc so it can stay on the road outside for now, there's no rush to do anything with it really. Once my other van sells I'll be able to afford an engine, but I'm just wary about spending all that because I'll have invested about a grand more than the van's worth and TBH I don't hear great things about any of the reconditioned engines! The one that's in it is a fairly recent recon FFS! the silver paint on the block is still shiny and everything.

 

Bits to rebuild this myself would probably be £500 or so by the time I'd bought new oil pump, a new cam, etc etc etc, plus £250 for a shed to do it in, and then there's the cost of machining on top, plus the risk that it'd be shit.

 

I did the other "easy" conversion on my other van which is a mk3 golf engine, but to swap this one over to that I'd need a new manual gearbox as they won't fit an auto, plus a shitload of [email protected] vw bits that would end up costing me £500 or so and tbh the flat 4 and auto box are what make this van what it is, so I'm 100% set on keeping it stock.

 

 

Anyway here's a video before and after. If you listen, you can tell that the valvetrain has become quieter! but there's still a knock which is really bad at 2000rpm under load. It goes quiet on overrun.

 

Before:

 

 

After:

Share this post


Link to post
Share on other sites

Bloody hell. Sorry man.

 

WW is right, keep the thing moving. The second you take a car off the road - the chances of it ever returning are at least halved.

 

I can offer nothing other than good luck. With a good Golf engine it'll probably last forever, and one of their Achilles Heels is sorted forever.

Share this post


Link to post
Share on other sites

You know what, I'm such an optimist that I'm going to change the oil and recheck all the clearances tomorrow and run it for 15 minutes to make sure that the new lifters are getting pumped up properly. Then I'll probably continue to sulk when it's no better.

 

 

Stick a load of magathick oil in.  Worked on Roadkill.  Well, it quietened the knock on a Willys flatfender anyway.

Share this post


Link to post
Share on other sites

I love this van for it's auto gearbox and lazy engine, changing the engine for anything other than another waterboxer would be shitloads of work and I'd have to convert to a manual box, and I really don't want to do that. Sure, it could be faster and more economical, but it would lose what makes me like it!

I've got a 2.0Gti t25 in my mums garage that is a great van, but I don't enjoy driving it anywhere like as much as I do this one!.

Unless a very good 2nd hand engine comes up that I can trust (or is incredibly cheap) then I'll just get this engine re-rebuilt and plonk it back in.

Share this post


Link to post
Share on other sites

I love this van for it's auto gearbox and lazy engine, changing the engine for anything other than another waterboxer would be shitloads of work and I'd have to convert to a manual box, and I really don't want to do that. Sure, it could be faster and more economical, but it would lose what makes me like it!

I've got a 2.0Gti t25 in my mums garage that is a great van, but I don't enjoy driving it anywhere like as much as I do this one!.

Unless a very good 2nd hand engine comes up that I can trust (or is incredibly cheap) then I'll just get this engine re-rebuilt and plonk it back in.

I'd recommend to have a look/get in touch with the german T3 clubs and forums. They all speak English and as VW people they are quite nice.

Share this post


Link to post
Share on other sites

 

 

Anyway, now I have a few choices:

1: Recon engine costing £1600

2: 2nd hand "good" engine at maybe half that.

3: Have a go at rebuilding this one myself. I would need to build a shed in the garden to do this. I've rebuilt an engine before and it didn't end well, but I did that outside my nans house on top of her bin.

4: Cut my losses and sell / break it

 

Now I really like the van so I don't think I'll sell it. It's a cracking shell so it'd be a real shame to break it for parts, but right now I can't afford £1500 for an engine and frankly I don't fancy taking my chances with a 2nd hand engine unless I can hear it run because I'm not that lucky.

 

Worth attaching an oil gauge direct to the engine to see what you get.

My eldest son has one which has run 12 month with buzzer of doom disconnected.

 

My youngest son had cylinder head studs rusted and nut broke off, obviously let all the water out.

Decided to do it properly, bought rebuilt engine from VW Heritage, as you say £1600.

13 months later, chocolate camshaft lobe.

Out of guarantee, but they sold me a cam half price.

We fitted the cam, made a balls of it due to rushing, and finished up selling it on.

 

So, 1. This is best solution, and should* last longer than ours.

       2. Cheaper but even more of a gamble.

       3. We struggled a bit getting the two halves together, ( never done one, it was middle of the night and I went on holiday the day after).

          If you go for this take your time.

          We did ask a local independent VW guy to do it and he declined.

       4. This is the option we took, mainly as I was away 3 month so my son bought a Mondeo estate to tide him over and liked it

 

There is no best answer, but better to do No 4 now than fail later along the line as we did.

Share this post


Link to post
Share on other sites

Bastard, I am gutted for you.   I dread the moment with mine because I know how much these things cost to renew and how hard it is to find a good engine no matter what you spend.   Des of this parish did have a good motor for sale not too long ago - see if he still has it.  

 

I do, a 1.9, and I've even replied to a message about it. 

Not sure going from 2.1 to 1.9 would be a great idea, it's only a small difference in size but going 1.9 to 2.1 makes a big difference. I rebuilt one recently, not easy these days, used to make one phonecall to order everything needed, now it's hours of searching the net, phoning liars and rejecting chinese crap, I wouldn't have much confidence in a £1500 'recon' as I'd guess a few corners will have been cut, you're best fixing it yourself, maybe it's not too bad and just needs a set of shells.

Share this post


Link to post
Share on other sites

 

Decided to do it properly, bought rebuilt engine from VW Heritage, as you say £1600.

13 months later, chocolate camshaft lobe.

Out of guarantee, but they sold me a cam half price.

 

The VWheritage engines are £3k now! Jeesus

 

I do, a 1.9, and I've even replied to a message about it. 

Not sure going from 2.1 to 1.9 would be a great idea, it's only a small difference in size but going 1.9 to 2.1 makes a big difference. I rebuilt one recently, not easy these days, used to make one phonecall to order everything needed, now it's hours of searching the net, phoning liars and rejecting chinese crap, I wouldn't have much confidence in a £1500 'recon' as I'd guess a few corners will have been cut, you're best fixing it yourself, maybe it's not too bad and just needs a set of shells.

 

I'm torn about what to do. a 1.9 probably isn't the way to go as I bet it won't run all that well on the 2.1 injection system, and also I'm not even sure if the inlet manifold would fit? or are they just a smaller bore?

 

Anyway, I quite like the idea of rebuilding it myself. Get myself a new shed in the garden, set up a nice workbench and just steadily go through the thing in the evenings after work and do things "properly" and not replace stuff that it doesn't need - like you say Des it might just need big ends and a crank grind which is probably only a couple of hundred quid in bits once I've done gaskets etc etc.

I've built an engine before  for a Mini and despite "doing my best" with it, it picked a bearing up within 10 miles. I was younger, dumber and used my nans wheelie bin as a workbench so I probably did rush things. I can take my time with this as I don't need the van as my only mode of transport, I've got 3 other cars to use instead this time!

 

Or I could get a £1500 recon engine - I agree with you that if they are going to actually replace everything they claim with new then there's not a lot of cash left in the pot to throw a lot of love at it: http://www.theengineshop.info/acatalog/Water-Cooled-Transporter-T25-2100cc-Injection-025100031DX.html

 

The other alternative is I've been given a number for "A bloke called John in Stoke" who has built about a dozen air cooled engines for my mate. I could take the engine to him and get him to see what it actually needs and just do that rather than throw a load of new bits at it.

 

 

 

Won't the Subaru flat 4 go into these without too much ballache?

Not a turbo mind,just a 2.0 sport should provide enough go

 

AFAIK they don't fit onto the auto box, but even if they did I'd need to buy adapter plates, make engine mounts, make a new engine harness, replumb the thing etc etc and it turns in to a way bigger job than I can do on the street outside my house!

 

 

 

I've just finished my morning brew, I've had a poo so I'm just about to go out and give it one last ditch attempt.

Share this post


Link to post
Share on other sites

Get another engine in unknown condition i.e. priced accordingly and have it rebuilt by someone who cares not a recon factory. It may cost a bit extra but you will have years* of trouble free motoring.

Share this post


Link to post
Share on other sites

Ahh, what a bastard, gutted for you. What actual engine is it (I haven't read full thread yet, sorry) and is there another VW car perhaps that had the same lump? Just trying to see if there's a way you could find a good running car to raid for the engine.

Share this post


Link to post
Share on other sites

Yo Kobbl4rz, this really sucks massive cuttlefish bollocks 24/7 for cash money, I feel for you. I was infected by your enthusiasm for this thing which on the face of it would tick all the 'DO NOT WANT' boxes for me, but it was making me want to have a shot in it and allow myself to become converted. Thinking about it, a half-capable injected 2.1 engine to push it along and an autobox, doing away with an unbearable bendy long gear linkage, sounds like the way to go with one of these and could make it into something i could get with.

 

Theres no way I could stomach £3000 for a recon engine - as you say I just could not be sufficiently certain that there was no chinesium in it, or brazilium/Mexicanium or other shonky materials, even if it did come form VW Heritage, the story above of someones camshaft going south after 13 months would put me off immediately. I reckon a DIY sort-out is your best option as you are clearly capable of making a sweet job of it.

Share this post


Link to post
Share on other sites

Get another engine in unknown condition i.e. priced accordingly and have it rebuilt by someone who cares not a recon factory. It may cost a bit extra but you will have years* of trouble free motoring.

 

There's nothing wrong with a good recon. It'll cost a bit, but there are some decent specialists out there who can sort it. Personally I'd not use The Engine Shop - a mate of mine who used to refurb Beetles reckons The VW Engine Company in Deptford are excellent, but it's still done down to a price. If you're specific about what you want doing, they'll fit new rather than recon - adds to the price but it might be better value. 

 

And obviously it'll only be as good as a wasserboxer ever was (i.e. not especially great) but I suppose at least it'll be original.

Share this post


Link to post
Share on other sites

Well I just redid the clearances and dropped the oil. I reckon there was ever so slight sparklies in the old oil, so something's not right. No big chunks or owt though.

With new oil and stuff it still sounds shit, I was being blindly optimistic telling myself it was the lifters when clearly it sounded fucked. I'm usually a mega pessimist about stuff so I decided to turn my frown upside down.

 

Honestly bollox it's ace with the auto box, it drives an absolute dream. If the engine didn't sound like I skeleton wearing a massive rolex having a wank in a filing cabinet while falling down a fire escape I would comfortably just jump in it and drive all kinds of miles to places and get out feeling refreshed and invigorated, my brown van is proper tiring to drive long distances for some reason.

 

I quite like the idea of rebuilding it myself TBH but I'm not sure if I would trust it long term. But there is a great appeal to just plodding about in a shed with nice cleaning bits of engine and measuring stuff etc for a few weeks.

 

I'll give a few rebuilders a call tomorrow and get a feel for them.

 

I've also heard good things about "The VW Engine Company" but they're like £2200 with the vat vs £1490inc for TES. That's like the step from "fucking hell thats a lot of money but I could just about stomach it" to "Jesus wept man" but I will get them on the blower and see what the score is.

Share this post


Link to post
Share on other sites

If you read the various recon engine threads on any of the VW forums you will go out and shoot yourself.   

 

TES have had mixed reviews, it is true, but so have ALL the others including the £3K ones.   All I can tell you is TES did me a gearbox about 5 years ago and I have had no trouble with that so far.   At least it is all done in-house by them rather than being farmed out - like chucked in the back of a Sprinter and whisked off to Eastern Europe or Malta or somewhere.   Not saying that's bad, but how can you do quality control over a telephone?   

Share this post


Link to post
Share on other sites

 

 

I'll give a few rebuilders a call tomorrow and get a feel for them.

 

 

 

I know it's a different story, but when my lovely Mercedes 190e shit itself - I toyed with all sorts of schemes.  Buying a breaker, buying an engine, buying a 'top end', killing it with fire - and eventually I spoke to a specialist.  Under absolutely no circumstances was anything other than the original engine going back in according to him, and he lovingly built it back up from spares that he'd acquired over the years and new parts where necessary/not worth mingebagging over.  

 

I was pretty certain I was going to end up putting a second hand engine in it, but for the same price as a 170,000 mile engine with unknown provenance and other issues (plus installation) the lion kept its heart and the car is still storming along now.

 

Again, good luck!

Share this post


Link to post
Share on other sites

Sad news. Is the three speed auto restricted to the wasserboxer then?

Yeah, the auto gearboxes don't have a removable bellhousing so they'll only fit a flat four engine. The manual boxes have swappable bellhousings so you can fit normal I4 engines out of golfs and whatnot, or as suggested above you can get a south african spec bellhousing and put big audi motors in.

 

 

 

Can you buy a recon bottom end and throw all the OK bits from yours into it? Might that be cheaper than a whole recon engine?

 

Yeah that was one thing I was gonna ask tomorrow, my heads are probably sound, they aren't scabby old ones and haven't been on long. There's got to be savings to be had there. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Floatylight
      Will be on the road shortly, right after fud has been consumed..
       
      Sent from my Moto G (5) using Tapatalk
    • By TripleRich
      Hi all, new to the forum.  Thought you might be interested in what I've got myself into
      I'd been after my first classic car for a while.  If it's big and made in the 70s I'm interested.  Looked at few things like P6s, Zodiacs, Victors, SD1s and various other things.  Problem was I didn't want to spend a boatload of money on something that looked alright but underneath was actually a total heap.  The solution was to buy a complete heap in the first place and spend the money fixing it.
      So in January I went ahead and bought this from a colleague at work who was moving away and needed to get shot of it.

      It's a part finished restoration (I prefer not started) and it needs a whole load of help if it's going to stand any chance of using a road again.
      Pros
      It's right up my street.  Granada Coupes are quite odd and certainly stand out from the norm.
      It still has the original engine, box, interior and most trim.
      It came with loads of panels I need to repair it (mostly original Ford stock).
      It came with so many spares I could probably build a few Granadas and still have stuff left over.
      It was cheap.
      Cons
      Most of the front end has been cut off.
      Most of the body structure is quite rotten.
      It's going to take me ages.
      I work at a restoration company and my boss kindly allows me to keep the car there.  So I've got access to all the gear I need to restore it.  I've been busy on the car for a while now so will post more pics over the coming days.
      Cheers 
    • By danthecapriman
      Thought I'd start a thread about my old Capri since it's now reached it's turn in the que to receive a bit of attention.
       
      I've actually had this since 2001, it's an early mk2, on an M reg 1974. Being an early car it's still got mk1 rear axle and single acting type rear brake set up aswell as a few other minor differences from later cars just to use up remaining mk1 parts.
      It started life here in the Portsmouth area and doesn't seem to have ventured far since.
      Originally a stardust silver 1.6 L poverty model, which means virtually sod all regarding luxuries. Basic 2 pod dash with black 'crackle' finish facia, no radio, no sun roof or vinyl roof, not even a centre console!
      When I got to it unfortunately it had suffered severely from serious rust and latterly a vandal attack, having it's door and rear quarter panel booted in.
       
      Over the next couple of years I got it sorted and a cheap re paint into roman bronze, which was a favourite colour of mine at the time. For the first year or two it seemed fine but since then things have deteriorated.
      The respray wasn't good! It's thin in places and started to micro blister in various places, worst of which is all over the bonnet. The same bodyshop also did a bit of the bodywork I hadn't finished which was also pretty poor in some places.
      It's always been a great driver and never struggles at mot time so I just kept on using it and doing nothing more than collecting parts now and again with a view to sort it one day.
      It's also gained a few non original extras over the years like a higher spec wood effect 2 pod dash facia (which I like more than the original), a short console, brown interior instead of the utterly fucked black original, 'laser' 4 spoke alloys and a few other things.
       
      Anyway, fast forward to last weekend, when I dusted it off after winter and noticed various areas of new rust coming through or older rust that's gotten worse. So the decision was made to go for a professional resto job now before I end up finding something else to distract me (like big american cars with knackered engines!).
       
      1974 Ford Capri BBK244M by Dan Clark, on Flickr
      Here it is as it currently stands. Looks ok from a distance but the reality is very rough around the edges and the paint is so bad in places it's becoming embarrassing!
      IMG_0509 by Dan Clark, on Flickr
      And the interior which I'll be re trimming into black leather at some point after the body works done.
       
      It's been taken to the same place that did my Mercury's engine rebuild, since they did such a good job and they seem a good professional bunch.
      I dropped it off Monday afternoon for a thorough check over to build up a list of work and get a rough quote.
      Today I heard back from them.
      Good news so far, I suppose. It is as solid where it counts as I thought it was. Chassis is fine, original strut tops fine, most of the back end is solid and just needs a few repairs here and there.
      The worst is the bottom of the windscreen surround due to the wrong seal being used and then fitted badly causing leaks. Inner sill to A post bottom corner very scabby, front wings pretty crap, and various paint defects etc.
      The engine is fine, compression all in tolerances. Suspension needs work, and some brake pipes are getting quite rusty. So far so good and no surprises!
      There's still more checking to do over the next few days but it sounds alright so far.
      This work should be made a bit easier by having a lot of panels and parts to fix things already. The big find being a new unused pair of front wings. Very hard to find mk2 items now, though I did have to pay for them!
       
       
      The plan here is to make the car solid, reliable and good looking. I'm not making a show car or going too mad as that stuffs not my thing and if it was I'd start with a better more original car.
      Some of the later add ons will be ditched like the mk3 boot spoiler that I hate! And return it to more standard looking mk2 as it should be. No go faster mods or anything like that.
      The main priority is to get the body sorted and painted properly (engine out job and everything) then maybe a bit of mechanical work as needed.
      The original idea was to re paint back into original stardust silver, but having thought about it I'm leaning more towards another favourite Ford colour of the era, Miami blue metallic, which is a lovely colour! Any opinions?
       
      This will be another expensive project but not one I think I could do at home on the drive and do justice to, so I'd prefer to farm it out and get it right this time. It also means I can carry on working on my Transit and Granada at home without another distraction!
      For anyone whose interested I'll try to update this now and then as things progress. I'll also try to get the old pics of the car from when I got it so you can see how rusty it was! Bear in mind though that I paid £100 for this car in 2001 with MOT and tax! Try doing that now.
      I'm sure this is going to be worth the expense, not that I'm even considering selling it of course but I've had it so long I kind of feel obligated to do right by the car in a weird way!
×
×
  • Create New...