Jump to content

1975 Ford Granada Coupe - Lots & lots of tinkering


TripleRich

Recommended Posts

Sorted out the hidden front speakers.  I've already hidden two in the back behind the quarter panel trims.  Up front the only place available is under the dashboard.  Under the dash from factory you have a very flimsy bit of black trim on both sides.  I've made something similar from steel to hold the two speakers.

20200704_104250.thumb.jpg.41e79d9943df09413666096be766b43d.jpg20200704_111103.thumb.jpg.09e480cd9b8b7328a3bf97d4aa034c6f.jpg

20200704_112503.thumb.jpg.21e07b0145754a75cc8bfe00865c3ccc.jpg20200704_140901.thumb.jpg.80d23a8c513d4279e7588bdeec5c5399.jpg

Put some sound deadening on the inside and fitted using the same mounts as the factory trim.

20200704_115338.thumb.jpg.a81383629bad3e7b72ff05ed4e654815.jpg20200704_142813.thumb.jpg.f224df5ef6cabbbf24aa24e469ba3728.jpg

Fitted some new pedal rubbers and finished up various small jobs in this area.

20200704_152604.thumb.jpg.e3a0bbed32d2fd9767307a7fbff8f987.jpg

The result is a decent sound system hidden from view.  No holes in door cards or the parcel tray, pleased with the results.  The speakers are connected to a hidden Bluetooth amp which connects to my phone when I switch on the ignition.

20200704_152517.thumb.jpg.fbef40f20193ee23a7b08376f051ec0b.jpg

I've also fitted some giffer spec mudflaps to try and keep the A posts and rear wings from getting chipped and covered in filth.  They are of course genuine Ford items.

20200704_175042.thumb.jpg.e12fb8f8018daa79fad8db8df17830ca.jpg20200704_175002.thumb.jpg.646b0248a95bd6366ebf037416dfc083.jpg

Link to comment
Share on other sites

At 1108 hours the labour would be £43,212 

Then add the VAT and the cost of parts and sundries.  A rough estimate for a full restoration on most rotten classic cars is about 1000 hours.  Some cars with silly parts prices can get close to £100k when complete.

Being able to do the work myself and a decent haul of parts is the only reason I took this project on.  When finished I will have spent nearly whats its worth on just parts, sundries and services like blasting & recon.  Used up most of my free time for the past 4 years spending every available Saturday working on it at about 8 hours a throw.  Not uncommon to work into the evenings or straight after work either.

So far...

  • Metalwork/rust repair - 639 hours - Remember I had to teach myself fabrication along the way and some areas I ended up doing again
  • Paintwork - 208 hours - Not having to worry about the roof saved a chunk of time
  • Mechanical/reassembly work - 261 hours - Slowed my pace here slightly to enjoy this part of the project

20160503_114829.thumb.jpg.d8642ae5bf1a05c3113653eab70f5461.jpg20200704_175042.thumb.jpg.8049ecf85f5dd08d5ceeb4bd6018cb7e.jpg

Link to comment
Share on other sites

Always great to catch up with this thread TripleRich. Have you seen the very short vid of Consul 3000GT racing I posted in the Youtube Moments thread on June 29th? There's only about a minute or so of the Consuls and the vid quality is disappointing, but at least something has survived. Maybe better quality vid will emerge in the future.

This sort of thing . . . .

PSxaMak.jpg

IDqZ5Wf.jpg

 

https://autoshite.com/topic/30832-youtube-moments/page/93/

 

Link to comment
Share on other sites

  • 2 weeks later...

I popped the chrome and caps off the wheels.  They were a bit of a mess, cosmetically challenged you might say.

20200718_131655.thumb.jpg.54bd198ad40b92ab580e4d354130d8f7.jpg20200711_140418.thumb.jpg.c61666528e102bea9f6f58fd9353004c.jpg

I could get the tyres taken off and run them down to the blasters but I'm trying to save a few quid.  I can do these myself, just a matter of time.

I removed as much rust and old paint as possible.  They've survived well considering nobody's touched them for 45 years.

20200711_140341.thumb.jpg.0dd5f1436fe8d047058bee702464500f.jpg20200711_140353.thumb.jpg.e012bd1a5cdcdaa871ffc49526bb3c31.jpg

Applied a rust treatment to the entire wheel.  Turns to a black paintable surface once it's finished doing its stuff.

20200711_141839.thumb.jpg.8a3c4433fb31adaf3643c117570ec00c.jpg

Masked up the tyre and valve stem.  The tyres will be replaced but I don't want to stare at overspray while I continue to use the old ones.

20200711_161720.thumb.jpg.0b3f1b140793e8abda2821ffe3e8b598.jpg

Heavy coat of etch primer.  Then some sanding before a heavy coat of satin black.

20200711_192600.thumb.jpg.03d536511d663b6b17c67d484c43b292.jpg

Then masking and lots of it.  Wheels of this style are a pain to paint, but the results are well worth a thorough masking job.

20200718_100705.thumb.jpg.3fccb95dfa4b762a100df5a885853625.jpg

Some strato silver and a splash of lacquer completes the wheel.  

20200718_131704.thumb.jpg.629802820977eebf208aa72ddb8e70f1.jpg

The spare doesn't have a tyre on it yet.  Very pleased with the masking job, I touched in any imperfections with a small brush before applying the lacquer.  Took about 13 hours to do all 5 wheels, glad its over!  

20200718_181346.thumb.jpg.bf6cc26f132343e70d7708f5dc7accb7.jpg20200718_181351.thumb.jpg.bb91558c0fb7e2b127cec0800e65a5dd.jpg20200718_181403.thumb.jpg.d1717036c8e6bb20216d839b7b793fae.jpg20200718_200822.thumb.jpg.67e89fe581ab24692606f08356193edf.jpg

I'll fit the centre caps and chrome embellishers at a later date. 

I've also done some upholstery in the boot.  Originally there was black carpet and it's all knackered.  Cut and glued in some new stuff.  I've used some campervan type carpet that can be stretched and molded to complex shapes. 

20200711_122404.thumb.jpg.653a047fd839733673a501fb16509fba.jpg 

Still a way to go yet.  Gets better with each weekend, well chuffed with the wheels.

Link to comment
Share on other sites

Great job, those wheels look absolutely fantastic.

I always thought those wheels looked the best on Mk1 Granada's, it's quite a "heavy" shape but they lighten  the look of the car somehow & make it look sportier.

I wish manufacturers today could just make cool looking steel wheels, I really don't like alloys &  plastic wheel trims piss me off.

Link to comment
Share on other sites

5 hours ago, JeeExEll said:

A more robust mass-production version of this (a kit for MGBs).

M1vaxV6.jpg

I had a pic somewhere of the 70s 13" 8-hole sports-wheels being painted. They made millions of them. Wouldn't fancy the job of hand painting all those with black enamel and a brush.

You used to be able to buy a mask for Ford 13” sports wheels painting, often sold in the little kiosks at car auctions with the gallon tins of tyre black and sticky numbers for windscreen pricing.

Link to comment
Share on other sites

  • 2 weeks later...

Time to look at the gearbox...

I have the original 4 speed unit which I think is a Type E but I may be mistaken.  I've driven many Capri's, Consuls & Granada’s with a 4 speed box.  For me personally they cry for 5th gear at 70 and Ford's reluctance to offer overdrive or 5 gears in the late 70s/early 80s really shows on today’s faster roads.  I'd planned to put a 5 speed in my car from the beginning of this thread.

Fortunately working in my profession the right gearbox is never very far away.  Here we have an early 5 speed type 9 from about 1983.  It came from a 2.3 mk2 Granada which I have driven so I know it’s good.  Being a 2.3 it’s got the right input shaft and bell housing for my engine.  Should be a straight swap.  It’s covered in oil from the 2.3 it was attached to, so much oil I'd say that engine leaked from day one of ownership.

1013427203_20200725_112010(1).thumb.jpg.388a952962c8f303a718ef04301a5d49.jpg20200725_112017.thumb.jpg.5523718e866a76bc176fadc8c98891d2.jpg

After a massive degreasing session it came up quite well.  

20200725_115752.thumb.jpg.9b973b650cc806eb9885117af7a5c6e2.jpg20200725_115805.thumb.jpg.d728d277918868a4b2378e9309ad53fa.jpg

I'll take some of it apart and replace the essential gaskets and oil seals.  I don't think it leaks but I'd rather put some fresh gaskets & seals in it,

20200725_122531.thumb.jpg.02b122244bb84d2bd61bdd35d7d9709e.jpg20200725_135215.thumb.jpg.ea39d341215c930404ae0f736a44808b.jpg

Only issue is the bolt for the cross member bushing has seriously corroded into the tail shaft housing.

20200725_141323.thumb.jpg.442872bee8344e60accbdd7107e093e3.jpg20200725_141906.thumb.jpg.572d8be7c5cd671c830bb1bff0f832e4.jpg

Despite several attempts at removing the sheared bolt with 19mm nuts and welding it just continued the shear until there was nothing to weld to.  I drilled the rest out and re-tapped the hole.

20200725_160611.thumb.jpg.c3d952cb9170953f58854f88c4e3c470.jpg

Lots of cleaning, degreasing and a few seals & gaskets.  Primed & painted all the various parts ready for reassembly.

20200725_180448.thumb.jpg.c4fe8fd4ad449f2a6c2da0c1d63d343a.jpg

Chuffed with the results and it still goes in all the gears!  I left the gasket between the box & intermediate plate because you have to remove the main shaft to replace it and I didn't fancy that.  I'm no gearbox expert so I always get a bit concerned when I start messing about with them.

20200801_121634.thumb.jpg.ae01b38fa2f6c4fd50151fc13378dc28.jpg20200801_121644.thumb.jpg.674a53269a6b0cd2cf445f102648d5c0.jpg

With so many jobs complete I sorted through and organised my remaining parts.  Found these!  They won’t be going on but I did laugh when I found them.

20200801_173621.thumb.jpg.af70abecdae3b4f6d225886755050805.jpg

Link to comment
Share on other sites

Finished another car today.  Don't usually post them that often but I had such a good test drive.  I hope the Granny drives as well.

It's a 1300L and I expected it to be dog slow.  Surprised me, much better than I was expecting.  You can keep your Mexico or RS2000, I'll take one of the these!

1496483597_20200806_132416altered.thumb.jpg.5cbb8383f6c668bfefe2d44487d72b84.jpg

Link to comment
Share on other sites

19 hours ago, Tamworthbay said:

Apart from the wheels that is perfect. 

We don't like them either.  I've yet to meet anybody apart from the owner who does!  Doesn't suit it, needs the steels back on for sure.

He's also changed the steering wheel which is now too small and obscures the fuel gauge.  

Link to comment
Share on other sites

Started the process of cleaning and painting all the various mechanical bits left.  Nothing complex but it certainly takes a while when its all this rusty.

20200808_085532.thumb.jpg.e252f09a2ad512e869b80df688a3af5f.jpg20200808_085540.thumb.jpg.dddf498d7fa08af7330480cadafdb687.jpg20200808_085554.thumb.jpg.e14390878a671cc622a3f5d0b7f88156.jpg20200808_085604.thumb.jpg.22e4c3c404df44567c30f53c87204ba9.jpg

The alternator will probably get rebuilt as its the original unit.  I've been let down by too may ebay/cheapo/generic alternators & starters on classic cars.  If possible I try to save the original ones as they end up being more reliable. 

20200808_115012.thumb.jpg.6c8902f31a738df57957bfc2166bcc5c.jpg20200808_115154.thumb.jpg.b93c1bd12a893f8e798d5ab4c868e33a.jpg

Lots of cleaning with various air tools and brushes to get everything rust free.  I've not painted the rocker covers or sump on the inside as I don't want to risk anything getting into the rebuilt engine.  For now I've coated the insides with oil to keep them fresh while in storage.

20200808_131810.thumb.jpg.813331228d1c6420203fffc07e6ac1db.jpg20200808_133341.thumb.jpg.db025c78ffd8665d8f0be4d87861836f.jpg

 

Link to comment
Share on other sites

Is that just a standard satin black paint or some exotic mix to replicate the factory finish?

Years agp I remember reading about a chap who restored a mk3 capri. He experimented with thinning down the coating applied to brackets etc to try to match economy driven measures in the factory with the colour not clinging as thickly to certain bits of contour (!) His obsession seemed to be replicating the factory assembly as closely as possible so curiously although he had very high standards in some areas he aimed lower than best practice to achieve his aim.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...