Jump to content

1975 Ford Granada Coupe - 1350 hours of work - On the road!

Recommended Posts

Looks fine to me. Just needs the time, you have everything else it seems.

Never attempted anything like that, but someone once told me you just put the bonnet on straight and build everything round it.

Am sure there's a bit more to it than that.


Keep going till the boss starts charging you. Good luck!

Link to post
Share on other sites

Before I get to the pics, bit of history on the car...

It was sold in Germany somewhere around Dortmund in 1975 as a 2.3 GL with vinyl roof, black cloth interior and carnival red paint which looks just like tomato soup.  Reg number was DO-KY 565.

It came to the UK in 1985 with its owner who was a Ford mechanic.  He went to work temporarily in a ford dealer on the south coast.  During that time it broke down and the owner sold it to a guy and returned to Germany.  It then spent many years being hardly used and sitting in the guys garden.  It only went out to some Ford shows, the last being 1994 which is when it was last taxed.  In 2005 it was then bought by the guy I bought it from and sat around for another 10 years inside various workshops pending restoration.  The clocks say it's done 86000km or 53000 miles which I reckon is probably genuine.


So onto the repairs...

The first thing I did was cough up some cash and got our more experienced fabricator to make some replacement kick well panels with all the correct pressings and shapes.  Both the top and bottom portions of these on both sides had rusted out which is about normal.  He also rebuilt and repaired the bonnet hinge panels which had rusted out under the wings.  The remains of the inner wings were cut off and replacement panels screwed on to allow for the repairs to be welded onto the bulkhead in the right place.


While this was happening I removed all the tar crap the ford poured over the floorpan.  It often doesn't stick very well and traps moisture in the floors.  I uncovered various areas that were rusting through while doing so.  The worst being around the rear jacking points which suggested the inner sills were probably toast (more on that later).


More stuff to follow soon!

Link to post
Share on other sites

Tasty! Will it be rebuilt as a left or right hand drive?

I don't think it's easy to do on these. The bulkheads different RHD-LHD, mirror image I think so to swap the steering over involves quite a bit of modification.

I'd planned doing that very thing to a mk1 2 door saloon, we never got them in the UK and I wanted to get one imported from Europe and use a RHD donor car to swap it all over but it turned out to be far more involving than I first thought. I think it might of been Junkman that told me about the difference and work involved.


LHD is ok here anyway once your used to it.

Link to post
Share on other sites

Good luck with it, look forward to seeing progress.


Always had a soft spot for these, probably from remembering the older brother of a lad I was at school with having one in the early ‘80s – stood out as something a bit unusual even then.


Sadly most of the ones I’ve seen in more recent years didn’t have windows and were painted in bright colours…..

Link to post
Share on other sites

I don't think it's easy to do on these. The bulkheads different RHD-LHD, mirror image I think so to swap the steering over involves quite a bit of modification.

I'd planned doing that very thing to a mk1 2 door saloon, we never got them in the UK and I wanted to get one imported from Europe and use a RHD donor car to swap it all over but it turned out to be far more involving than I first thought. I think it might of been Junkman that told me about the difference and work involved.


LHD is ok here anyway once your used to it.


Can't have been me, since I know nothing about MKIs.

All I know is that LHD is far superior for rolling straight onto the pavement if one's plasterised.

Link to post
Share on other sites

Can't have been me, since I know nothing about MKIs.

All I know is that LHD is far superior for rolling straight onto the pavement if one's plasterised.

Perhaps it wasn't then. I'm sure I was discussing converting mk1 2 door saloons to RHD with someone on here some time ago. I can't think who it was in that case that mentioned the bulkhead being different... Oh well!

Link to post
Share on other sites

Converting a mk1 from one drive to another would be a huge task and require a solid donor car for the job.  A Mk2 Granada might be easier as the bulkheads on those are almost the same on each side with the heater box in the middle.  You'd still have to move stuff like the battery tray though.


I wont be converting the coupe as I want to keep it original.  I've driven LHD stuff on UK roads and its not that bad really.  You soon get used to it and forget about it.

Anyway, onto some more pics...

With the complex bonnet panels and kick wells repaired the car was mocked up with all the replacement panels to make sure things were going in the right direction.


Including the inner wings and valence there are 12 panels that come together to form the front end.  Everything fitted together quite well first time round and was held on with panel screws while the wings and bonnet were trial fitted.  Having original Ford panels makes this job much easier.





Link to post
Share on other sites
  • TripleRich changed the title to 1975 Ford Granada Coupe - 1350 hours of work - On the road!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By The Moog
      Didn't bother to do a collection thread as was a 30min drive so fairly boring.
      Yesterday I won this

      Which is effectively going to replace the civic and the xantia.

      Picked car from a bodywork guy in foreign lands (Yorkshire).
      First thoughts are that I think it has been sitting for a while but started straight up. Apart from service bits and potentially a cambelt everything seems to be good with it. Comes pre dented.
      Current is differently abled tax so that will need to be changed.
      Windscreen has small crack in passenger side.
      Runs really cold, this is after 30 miles of motorway

      Mind you it honks. Properly honks. Not as much as the focus I got from Shadow but not far off.

      List of jobs
      Oil change
      Spark plugs
      Air filter
      Rear boot struts
      Front discs and pads
      Cam belt plus bits
      Ball joints
      Drop links
      Rear anti roll bar bushes
      Stereo code
      Windscreen crack
      Swimming pool emptied from boot wheel well
      Seal rear light clusters
      And a big does of cleaning
    • By phil_lihp
      Morning chaps, long time no see.
      I've not had much in the way of shite to share on this forum of late but I have now gone some way to redeeming myself with this glorious old heap, an eBay purchase which I won last night.  Fortunately the seller seems decent and isn't in any rush for it to leave so there won't be much happening for a  few weeks until collection can be arranged, leaves me plenty of time to clear the decks in preparation.
      The essential stats are that it's a 1977 Princess 1.8, I think it's a base model and a Series 1 given it's not got a 1.7/2.0 O-series engine which I would have preferred.  Not sure how rubbish the B-Series is in this thing but I guess we'll see.  It's got an MOT and has been woken from many years of slumber fairly recently, I think it was on eBay last year prior to the current owner obtaining it but I don't have any details.  I think it's a base model and lacks power steering or indeed any equipment to speak of.  It's apparently very solid and has been undersealed, there's some rot above the bootlid and in the doors and the bonnet looks awful but is mostly surface corrosion I think.  It'll be getting a proper going over once I get my hands on it, a full service and brake refurb is likely the first port of call, plus finding someone local who can pump up the hydragas.
      My sole experience of these is driving Philibusmo's utterly ruined example (OKK if anyone remembers the ex-Vulgalour one) a few years back and I was so impressed at how well it drove considering the state it was in, I've wanted one for years so this is a slightly weird dream come true.
      Feel free to chip in with anecdotes, advice and mockery.  More details will probably surface in a few weeks once it lands.  It has MOT but it's on ancient tyres and has electrical issues (I know, who'd have thought?) meaning the lights and cooling fan don't work.  Given that it's in Kent and I'm in Devon, I am probably going to take the easy way out and Shiply it home.  Plenty of time yet to make some arrangements for that.
      Watch this space.



    • By dome
      This evening I venture forth into hitherto unknown lands (Kirkintilloch) to collect my latest acquisition.

      Which, naturally, has issues.

      I have purchased my first line of defence.

      Which appears to have antigravity properties

      More will follow this evening...
    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.

      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.


      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...

      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.

      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...

      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.

      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By Fumbler
      To mark the genesis of my fleet project thread I here present my new car: a 1997 Nissan Micra Shape-

      It really looks that good. There is a reason for this: its previous owner was an old lady who loved the thing so much so she made every effort to keep it in good shape. It originally came from Fleet in the GU postcode which suggests to me it was bought by the present dealer at auction, hence arriving down here in Kent. Before seeing the car I checked its MOT history and its only fails were thanks to broken stoplights, which shows me that it was very well cared for. I suppose an example of this was that on the last MOT, an advisory was a corroded rear silencer. The silencer on the car when I saw it was new. Methinks the lady wanted to keep it as good as possible. It was kept in a garage and so all the bumpers and black trim are very black and the tyres are in very good condition. Spare never used! Also included a free Dettol first aid kit from 1997.
      This car has 15000 genuine miles on the clock. We clocked over 15000 during the test drive! The lady owner really only trundled around her village in it and the MOT shows that it only did some meagre miles between tests. This, of course, came at a price. We saw a cherry red Micra from 2002 at the same dealer. Paint was shoddy and when they washed it the boot had massive sections of bare metal and it wasn't very happy. This car, however, is in fabulous condition and there was no contest between the two cars- it really is that good, inside and out. Immaculate interior, driver's airbag, cassette player... all there and all functioning (apart from cassette thanks to new battery and failed display). This meant that I bought it for £1600, £100 over what was my uppermost limit, but I knew I wouldn't see another like this that was in as good shape for a fair while. It was priced very ambitiously, at £1990, so I'm content in the fact I managed to slash a few hundred off the price. There wasn't that much paperwork though. All the dealership received was the logbook with 3 service stamps from 1998, 1999 and 2000, the radio key pass, a National Trust sticker, and the original paperwork holder. I suspect the old lady died and had her car auctioned, and the massive file of paperwork is now someone's egg carton, along will everything else she owned.

      As always, this car isn't exactly in showroom condition. While the inside is great and the floor is solid, and the underseal is in great shape, the not undersealed parts need a small looking at. Mainly the rear of the driver's side sill. It's really the only bubbling on the car. I suspect a well aimed stonechip managed to fester over the wintery salted roads, making it rust even more. It's around the size of a 5p piece, and will give me the opportunity to spray the insides of the sill with some chain oil to prevent any further corrosion. Behind the fuel tank there are a few rusty joints- places where the spraygun cannot get paint onto- which some Vactan and Dynax should put to rights. Alternator belt looks original because of the cracking and Nissan badges and will need doing soon as well as the front plate. As much as I like the 90's font and original dealer surround, the dishevelled R and general water ingress is a persistant MOT advisory. It could be the MOT station being strict (and most likely is considering there's a Saxo down the road with far worse blackening), however for the sake of peace of mind and all that, I'll get a new one made. The rear has already been replaced indicating this has happened before.
      All in all, I think this is a nice plucky motor. I'll have it by the end of the week; just got to sort out tax, insurance, and it's going to have an MOT. As part of the deal it's getting the MOT and an oil and filter change which will be something ticked off the list. It has some love scratches and chips here and there, but it drives well, is stiff and controllable, and should make out to be a nice summer project!
  • Create New...