Jump to content

1975 Ford Granada Coupe - Lots & lots of tinkering


TripleRich

Recommended Posts

17 minutes ago, Spottedlaurel said:

Fantastic work as ever, your knowledge and understaning of these things go together is remarkable.

Were they built this well when new?.........

Thanks!  Since I started working on classics 5 years ago I've built about 5 Consul/Granadas so have become quite familiar with them.  They were built  quite well mechanically from new and had a good reputation.  Body and trim on Mk1s can be a bit sloppy.  One of my trim pieces on the rear needed new mounting holes as the existing ones were very off.

Link to comment
Share on other sites

46 minutes ago, DSdriver said:

I saw a pic somewhere of the vinyl clipped into a rectangular frame which was then lowered onto a roof. I've no idea if this is how they were all done but it did seem quite a good method of getting it in the right position.

I'm sure there were various methods.  I found this the other day which is worth a watch.  GM in the 70s put about 3 or 4 guys on the job.  The vinyl looks to already be cut to size before its fitted.

362582174_VinylRoof.thumb.JPG.4a6cc66142d60bbf52a96c09c67f6ddc.JPG

 

Link to comment
Share on other sites

Ford's semi-trailing arm arrangement looks nicer than Nissan's efforts in the 1980s. They used box section which are really pretty damn heavy. 

S12-Rear.jpg

I don't have pictures anymore but when I rebuilt mine I slotted the other mounts, had a bracket welded on and fitted eccentric bolts for camber adjustment.

Link to comment
Share on other sites

10 hours ago, The Mighty Quinn said:

Which wheels are you fitting? All three types are fine looking.

I'll be going for standard GL spec which is the 'sport' wheels with a chrome embellisher around the rim.  They need to be overhauled but they are a decent set of 5 with not too much corrosion.  I may pick up at set of the alloys in future as I quite like those.  

20200323_123102.thumb.jpg.dc4f4bab1937da4475c6f51faeb07b0b.jpg

 

 

Link to comment
Share on other sites

On 3/23/2020 at 7:23 PM, TripleRich said:

I'll be going for standard GL spec which is the 'sport' wheels with a chrome embellisher around the rim.  They need to be overhauled but they are a decent set of 5 with not too much corrosion.  I may pick up at set of the alloys in future as I quite like those.  

20200323_123102.thumb.jpg.dc4f4bab1937da4475c6f51faeb07b0b.jpg

 

That's how my parents' 2000 L's wheels were. Exterior wise it looked more like a GL as not only did it have the chrome wheel embellishers it also had the vinyl roof and front fog lights too. I learned this after I acquired a 1976 Ford brochure in the 1990s.

All the other Granadas I used to see around in the 1980s tended to be Ghias with the T bar auto. 

Link to comment
Share on other sites

  • 1 month later...
On 3/26/2020 at 9:54 AM, The Mighty Quinn said:

Oddly, the last of the Mark I Granada base models (not even an L) used the original GXL type stainless hubcaps. A taxi driver I knew had one new, Roman bronze, tan cloth

The estate’s also had stainless hubcaps, my estate is Roman Bronze with tan cloth but I will be fitting the sports steel wheels as I think they look great on Granada’s.

I got excited seeing this thread and was hoping to see an update but I suppose the workshop is locked down ?

Link to comment
Share on other sites

  • 3 weeks later...

I've also finished the Ghia pictured a page or so ago.  Pleased with this one, I spent a lot of time cleaning red over spray off so many parts.  Lot of work to get the trim looking like it does now.  Requires a sunroof seal, mot and road test before returning to the customer.

675029231_20200519_125817altered.thumb.jpg.9a3f39d1ec3b9906019330962f2773a1.jpg20200519_144434.thumb.jpg.c23c637b67126ec9579e5b8ebace3ef5.jpg

Hoped to move on to something different.  Nope, have a Mk2 Granada Sport instead...  Cheers!

20200519_153735.thumb.jpg.9e809b7b394fb1de5adbbfd8111cc63b.jpg20200522_121047.thumb.jpg.2b5283b63da30fc834b56c16506b3b82.jpg

This one will be entertaining.  Customer took it apart 10 or so years ago.  Everything is knackered, nothing labelled, no pictures and 20% of the parts are missing...

We do restore other types of car, honest!

Link to comment
Share on other sites

We have plenty of facelift Mk2 Granada pictures on file from others we've dismantled in the past.  Very lucky, I'd be buggered otherwise.  Also have a contact with a Mk2 sport should I get into any issues.  We have parts on site but as yet I don''t know exactly whats missing.

Link to comment
Share on other sites

On 5/24/2020 at 7:54 PM, TripleRich said:

I've reached a milestone.  The car is now back on it wheels which brings 3 years of sitting on body rollers and trolleys to an end.

First I built most of the front sub frame.  As usual everything is either new or overhauled.  The front springs are not much fun on these, have to be very careful and try not to scratch anything.

20200523_142809.thumb.jpg.0c00744995fd7a347cad0d38cf5a50b1.jpg20200523_142828.thumb.jpg.efe7e0704f0578984cc1879c7e90ed94.jpg

Plenty more to fit but at this stage its easier to finish once installed on the car.  Fitting is very easy via 4 large bolts through the chassis legs.  After fitting I overhauled the front hubs, painted them and fitted new wheel bearings.  Below you can see the cleaned & painted stub axle just prior to fitting the hub.

20200523_180137.thumb.jpg.8b4c1936fa48e79e8d1d6b8513ef7b59.jpg

Next I installed the rear sub frame.  Both front and rear units are very heavy to handle so I ensured I had assistance with those particular jobs.  You can put them in alone but it takes much longer and you risk injury.  The dampers are original bilstein units in very good condition.  Gives the car a very soft ride just like they should be.  You can see I've some touch up to do on the stone guard from the trolley its been sitting on for over a year.

20200524_115019.thumb.jpg.40c5612f4e2c574e0a8db74b02fdfde9.jpg 

The old Viking Norway tyres still hold air despite being 35 years old!  I'll be changing them when the car nears completion.  I will of course sort the wheels out at the same time.

20200524_181431.thumb.jpg.21755295eda7bec9089c26eab2d513d7.jpg20200524_181457.thumb.jpg.0a9e074b423ebf009a8d6542d680d6dd.jpg

Continued to work through the mountain of parts left to fit.  I've done the rear brakes and installed the handbrake cable.  Will continue to work on the braking system and front sub frame next time.

20200524_130932.thumb.jpg.97ef4a1c4a1e5fbd10de6055da5b6e90.jpg20200524_143700.thumb.jpg.23246ee3c7a142c84934aecf82ecced6.jpg

That looks stunning; the attention to detail is something else. The only thing I'm not 100% sold on is the vinyl roof,  but I get that you want to make it as factory accurate as possible. 

I think I mentioned it earlier in the thread somewhere,  but I still feel it's relevant - I wonder what percentage of car restoration companies would go to the lengths you've gone to in a 'nut and bolt restoration? I'm guessing 0.0000001%.

I'm so glad people like you, and the company you work for actually exist. 

Link to comment
Share on other sites

The original fuel tank is a right mess.  Despite being rotten its also quite beaten up/dented.  Luckily I was able to obtain a secondhand replacement that was clean inside.  On the outside it was the usual mix of stone guard and rust.

I've stayed a few nights this week and got the job sorted.  Removed all the loose rust and took the tank back to bare metal (about an hour of noise and mess).  These were never painted from factory, they just had a very thin e-coat or anodized finish which never lasted.

20200526_184358.thumb.jpg.e7b89abf62ce1394e2d638fa55aadf28.jpg

Applied a rust treatment and left to cure.  Once compete the rust turns black.

20200526_191209.thumb.jpg.8ea4593e0766948959a02b6cbaf95e97.jpg20200526_194204.thumb.jpg.0dfac9e88ecc9b76e416d4c7e87b26b4.jpg

Coat of etch primer and then some silver enamel.  I usually stone guard customers tanks for max protection.  Decided on a less robust but more interesting finish for my own tank.  I also rinsed out any dirt that got into the tank during the process.

20200526_194933.thumb.jpg.345911dd3fd00d10b068aa11694fea6a.jpg20200526_200641.thumb.jpg.c665d108fd9daa367c40fc81daa1d649.jpg

Cleaned & painted the filler neck.  New old stock seals & sender have been fitted of course.  Being a face lift this car is fitted with a fuel return line hence the two outlets.  Early cars didn't have this which can lead to hot start & vapor lock problems on some models. 

20200527_191542.thumb.jpg.79de3ebab3fd077ab038c09f52724d37.jpg20200527_191559.thumb.jpg.843843070a9653802accbf2a81f4365b.jpg

Fitted to the car with new tank straps and rubber pads to stop it rubbing the boot floor.  Not the easiest of jobs but I'm pleased with the result.  Contrasts nicely with the black stone guard on the body.  I'll tidy up the red over spray on the floor pan at a later date.

20200528_182519.thumb.jpg.9ff43d9c54cde9a4caa99f142106533e.jpg20200528_182537.thumb.jpg.307e41ddb8c72867845589da35ca7c49.jpg

The finishing touch

20200528_190202.thumb.jpg.98ddd20e32ead36bab731e52527ff4c8.jpg

Another job ticked off the list.  I'm getting closer to engine & gearbox with each day.  Will sort the fuel lines out this weekend.

Link to comment
Share on other sites

Awe-inspiring work, as ever. Great to see that you're still going through everything so thoroughly when there must be the temptation to quickly lob it together and see it complete.

Scanned this old photo in during the week, this seems like an appropriate place to put it:

49943691478_db98ff1af6_b.jpg

1974 Ford Granada 3.0 Ghia Coupe Auto GDA 460N (1990) by Spottedlaurel, on Flickr

Link to comment
Share on other sites

1 hour ago, Skizzer said:

Or indeed anyone nicking it for any other purpose, before we tar all banger racers with that brush.

A fair & valid point.  I think the worry is that if it was nicked by someone who tried to give it a new identity or sell it or something similar, it would quite possibly be able to be tracked, and it turn up intact and be able to be recovered.  Were it nicked for banger racing it would be devastating to see it ripped to pieces within seconds and then smashed to smithereens.

I've nothing against banger racing at all, in fact I quite like it.  What pisses me off is the very few who openly brag about smashing up something rare/valuable/in astonishingly good condition.  Three categories this car would fall squarely into. (Amongst many others)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...