Jump to content
TripleRich

1975 Ford Granada Coupe - 1023 hours of work - Rebuilding all the mechanical bits

Recommended Posts

Looks fine to me. Just needs the time, you have everything else it seems.

Never attempted anything like that, but someone once told me you just put the bonnet on straight and build everything round it.

Am sure there's a bit more to it than that.

 

Keep going till the boss starts charging you. Good luck!

Share this post


Link to post
Share on other sites

Before I get to the pics, bit of history on the car...

It was sold in Germany somewhere around Dortmund in 1975 as a 2.3 GL with vinyl roof, black cloth interior and carnival red paint which looks just like tomato soup.  Reg number was DO-KY 565.

It came to the UK in 1985 with its owner who was a Ford mechanic.  He went to work temporarily in a ford dealer on the south coast.  During that time it broke down and the owner sold it to a guy and returned to Germany.  It then spent many years being hardly used and sitting in the guys garden.  It only went out to some Ford shows, the last being 1994 which is when it was last taxed.  In 2005 it was then bought by the guy I bought it from and sat around for another 10 years inside various workshops pending restoration.  The clocks say it's done 86000km or 53000 miles which I reckon is probably genuine.

img092.thumb.jpg.b4389057ad2a2ef467798a38521880e9.jpg

So onto the repairs...

The first thing I did was cough up some cash and got our more experienced fabricator to make some replacement kick well panels with all the correct pressings and shapes.  Both the top and bottom portions of these on both sides had rusted out which is about normal.  He also rebuilt and repaired the bonnet hinge panels which had rusted out under the wings.  The remains of the inner wings were cut off and replacement panels screwed on to allow for the repairs to be welded onto the bulkhead in the right place.

20160513_131825.thumb.jpg.d33cc82c915b8da05de8e180807dd4ac.jpg20160520_172608.thumb.jpg.8ccd3e39f7609a6c7a9584753ecaaa82.jpg

While this was happening I removed all the tar crap the ford poured over the floorpan.  It often doesn't stick very well and traps moisture in the floors.  I uncovered various areas that were rusting through while doing so.  The worst being around the rear jacking points which suggested the inner sills were probably toast (more on that later).

20160604_162021.thumb.jpg.e37f7174113b78be4b643b2adf1a39c6.jpg

More stuff to follow soon!

Share this post


Link to post
Share on other sites

Tasty! Will it be rebuilt as a left or right hand drive?

I don't think it's easy to do on these. The bulkheads different RHD-LHD, mirror image I think so to swap the steering over involves quite a bit of modification.

I'd planned doing that very thing to a mk1 2 door saloon, we never got them in the UK and I wanted to get one imported from Europe and use a RHD donor car to swap it all over but it turned out to be far more involving than I first thought. I think it might of been Junkman that told me about the difference and work involved.

 

LHD is ok here anyway once your used to it.

Share this post


Link to post
Share on other sites

Good luck with it, look forward to seeing progress.

 

Always had a soft spot for these, probably from remembering the older brother of a lad I was at school with having one in the early ‘80s – stood out as something a bit unusual even then.

 

Sadly most of the ones I’ve seen in more recent years didn’t have windows and were painted in bright colours…..

Share this post


Link to post
Share on other sites

I don't think it's easy to do on these. The bulkheads different RHD-LHD, mirror image I think so to swap the steering over involves quite a bit of modification.

I'd planned doing that very thing to a mk1 2 door saloon, we never got them in the UK and I wanted to get one imported from Europe and use a RHD donor car to swap it all over but it turned out to be far more involving than I first thought. I think it might of been Junkman that told me about the difference and work involved.

 

LHD is ok here anyway once your used to it.

 

Can't have been me, since I know nothing about MKIs.

All I know is that LHD is far superior for rolling straight onto the pavement if one's plasterised.

Share this post


Link to post
Share on other sites

Can't have been me, since I know nothing about MKIs.

All I know is that LHD is far superior for rolling straight onto the pavement if one's plasterised.

Perhaps it wasn't then. I'm sure I was discussing converting mk1 2 door saloons to RHD with someone on here some time ago. I can't think who it was in that case that mentioned the bulkhead being different... Oh well!

Share this post


Link to post
Share on other sites

Converting a mk1 from one drive to another would be a huge task and require a solid donor car for the job.  A Mk2 Granada might be easier as the bulkheads on those are almost the same on each side with the heater box in the middle.  You'd still have to move stuff like the battery tray though.

423074991_MK2Bulkhead.thumb.JPG.7b404ade7d6253352641bd1567ae1241.JPG

I wont be converting the coupe as I want to keep it original.  I've driven LHD stuff on UK roads and its not that bad really.  You soon get used to it and forget about it.

Anyway, onto some more pics...

With the complex bonnet panels and kick wells repaired the car was mocked up with all the replacement panels to make sure things were going in the right direction.

20160519_143844.thumb.jpg.69af71748de25052c5d17e65e7656a87.jpg20160506_181012.thumb.jpg.4e14920fb3465c378deaaae3828ee875.jpg

Including the inner wings and valence there are 12 panels that come together to form the front end.  Everything fitted together quite well first time round and was held on with panel screws while the wings and bonnet were trial fitted.  Having original Ford panels makes this job much easier.

20160519_143917.thumb.jpg.f42b68a94a701415a5dedcace31fadff.jpg

 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By snagglepuss
      Didn't bother to do a collection thread as was a 30min drive so fairly boring.
       
      Yesterday I won this
       

       
      Which is effectively going to replace the civic and the xantia.
       

       
      Picked car from a bodywork guy in foreign lands (Yorkshire).
       
      First thoughts are that I think it has been sitting for a while but started straight up. Apart from service bits and potentially a cambelt everything seems to be good with it. Comes pre dented.
       
      Current is differently abled tax so that will need to be changed.
       
      Windscreen has small crack in passenger side.
       
      Runs really cold, this is after 30 miles of motorway

       
      Mind you it honks. Properly honks. Not as much as the focus I got from Shadow but not far off.
       

       
      List of jobs
       
      Oil change
      Spark plugs
      Air filter
      Thermostat
      Rear boot struts
      Front discs and pads
      Cam belt plus bits
      Ball joints
      Drop links
      Rear anti roll bar bushes
      Stereo code
      Windscreen crack
      Swimming pool emptied from boot wheel well
      Seal rear light clusters
       
      And a big does of cleaning
    • By 320touring
      A long time ago, in a galaxy far away, The Burd and I went to see the Skizzer to start getting a MK1 Golf Convertible that had been off the road for 10years..
      After a couple of sessions in deepest darkest Wales , coupled with some sterling help and fettling by Skizzer himself, it was time for us to head down and bring the thing back up.
       
      This went well:
      New tyres were procured and fitted

      The in-game tank pump was pulled out and a new filter fitted

       
      Then I got in touch with my Inuit side, using brand new* magnets to undertake "tank shite" fishing


      A full check over and a couple of test drives showed it fit to play.
      We set off for sunny Oswestry, only to have both front calipers sticking after 120 miles. Some water and time to collect down saw them free off and cause no further problems.
       
      Upon getting just past Tebay, it started running rough - nicking into Todhills rest area and luzzing in 10L of fuel had it running bang on for the next 70miles before it died.
      This was the final scene on the way home.

      I got to bed at 00:45, and left it to sit until today.
    • By dome
      This evening I venture forth into hitherto unknown lands (Kirkintilloch) to collect my latest acquisition.

      Which, naturally, has issues.

      I have purchased my first line of defence.



      Which appears to have antigravity properties

      More will follow this evening...
×
×
  • Create New...