GrumpiusMaximus Posted September 22, 2019 Share Posted September 22, 2019 1 minute ago, Nibblet said: I like the buttery biscuit BASE, I'd walk past a herd of Ferraris to admire it. Couldn't give a monkeys about Ferraris, Porsches or Bugattis. I would also walk past them all to look at this in all its glory. Link to comment Share on other sites More sharing options...
Eyersey1234 Posted September 22, 2019 Share Posted September 22, 2019 14 minutes ago, GrumpiusMaximus said: Couldn't give a monkeys about Ferraris, Porsches or Bugattis. I would also walk past them all to look at this in all its glory. Ferrari are of no interest to me either, give me this bAse any day. GrumpiusMaximus 1 Link to comment Share on other sites More sharing options...
BorniteIdentity Posted September 29, 2019 Author Share Posted September 29, 2019 As detailed in the excellent "Motoring Notes" we visited the BLARG Autumn Tat Fest at MK Museum today. It was an opportunity to get the Mini out of the garage, and to get my son away from the Xbox! Completely by coincidence, today was the first time I've ever driven the Mini in the rain; not because I'm protecting it - just because we had a fairly dry summer. Both laddo and I were alarmed to see rain streaming down the front of the speedo as we bounded down the A421, and this was quickly diagnosed as shrinkage in the windscreen rubber. It also explains why the ash tray is rusty (!). I will likely stick some chewing gum or something equally as low rent in the gap until things get serious next year. It was an excellent meeting, and the weather was largely kind. It was fantastic to see the @quicksilverMaxi (I'm now very keen to try one out!), lovely to talk to @Slowsilver@richardmorris and I think I spotted @Zelandethon my way out too! I am beginning to become increasingly embarrassed by the state of the Mini. Which is unfortunate. As I've just about run out of money. The Pinto rebuild is still not finished, the Mercedes money has been absorbed by other things like a house with subsidence and I've had a work contract fall out of bed too which means I'm down on money as of next month. I worry that it will have to stay shit for a longer time than first anticipated, which is frustrating and demotivating. I don't want it mintola, but I do want to drive it without a HAZMAT suit on. Still, this happened on the way home. 1,000 miles since May. Here's to many more. Six-cylinder, Mrs6C, jumpingjehovahs and 18 others 21 Link to comment Share on other sites More sharing options...
somewhatfoolish Posted September 29, 2019 Share Posted September 29, 2019 Something non-setting may block up your waterfeature until you can do it properly; Arbomast Tadhg Tiogar and BorniteIdentity 1 1 Link to comment Share on other sites More sharing options...
BorniteIdentity Posted October 12, 2019 Author Share Posted October 12, 2019 As regular readers have probably gathered, it’s been a pretty bruising year at this end. Job contract after job contract had wobbled and fallen, and it’s been far less exciting on the car front than perhaps I’d hoped. On top of all that, our lovely old house decided that - after 165 years in approximately the same place, it would have a little go at wandering. It looks like the subsidence has been caused by the hot summer of 2018 and a tree that was removed last year causing the roots to rot. Anyway, found these lovely old photographs online and feel a lot better about things. I guess like with old cars, you don’t really own them. You’re just the custodian. Austin Princess? Fat_Pirate, egg, rob88h and 4 others 7 Link to comment Share on other sites More sharing options...
500tops Posted October 12, 2019 Share Posted October 12, 2019 Morris 1800? Amishtat 1 Link to comment Share on other sites More sharing options...
Timewaster Posted October 12, 2019 Share Posted October 12, 2019 Oh bugger. Hope your toast lands butter side up soon. Ohdearme and BorniteIdentity 1 1 Link to comment Share on other sites More sharing options...
BorniteIdentity Posted October 21, 2019 Author Share Posted October 21, 2019 Time and time and time again, thoughts of improving the Sierra went round and around my head. What's the point of sticking with the pinto? And if I MUST - why not a 2.0? But I can get to a Duratec HE engine easily by robbing it from our old Focus which sits still more often than not. In the end, sentiment meant that I ended up getting the original Pinto head rebuilt. 95% sentimentality, 5% fiscal prudence. The original cars are the ones that garner the most interest on the open market, not that I wish to ever divest. I dropped the head in at the local garage in July, he said he'd fit it in around other work and to give him a couple of weeks, and he eventually phoned on October 14th. Hashtag rolleyes. The good news is, on the surface at least, he's done a bloody good job. That's a brand new, Ford camshaft - the head has been skimmed and a replacement spray bar added. There's also a brand new thermostat housing on the end as well. The plan is to get her running this weekend; ahead of that the effervescent @alf892requested the fan/waterpump be delivered to his executive detached residence so the two could finally be separated. 35 years worth of corrosion meant we fought, in anger, for about 45 minutes with the spiteful little shit. It got cut, viced, squeezed, smashed and sworn at and - eventually - we won. Naturally. Note the scaffold pole behind Alf's left arse cheek that played a critical role in proceedings. The fan is now sans pump - the new one awaiting mating season this weekend. I'll keep y'all up to date. Six-cylinder, danthecapriman, BL Bloke and 29 others 32 Link to comment Share on other sites More sharing options...
Bren Posted October 21, 2019 Share Posted October 21, 2019 I am glad it will be kept standard. The original engine contribute to the patina. A duratec lump would ruin it. Coming back from Nuneation this morning I saw an 18 plate audi A5 on the back of an AA wagon. A 12 month old prestige car. I am not sure it is progress. BorniteIdentity, danthecapriman, Eyersey1234 and 4 others 7 Link to comment Share on other sites More sharing options...
Eyersey1234 Posted October 21, 2019 Share Posted October 21, 2019 9 minutes ago, Bren said: I am glad it will be kept standard. The original engine contribute to the patina. A duratec lump would ruin it. Coming back from Nuneation this morning I saw an 18 plate audi A5 on the back of an AA wagon. A 12 month old prestige car. I am not sure it is progress. I'm also glad it's being kept standard, I agree with Bren that a Duratec would spoil it. BorniteIdentity, danthecapriman and scdan4 3 Link to comment Share on other sites More sharing options...
danthecapriman Posted October 21, 2019 Share Posted October 21, 2019 57 minutes ago, Bren said: I am glad it will be kept standard. The original engine contribute to the patina. A duratec lump would ruin it. Coming back from Nuneation this morning I saw an 18 plate audi A5 on the back of an AA wagon. A 12 month old prestige car. I am not sure it is progress. 47 minutes ago, Eyersey1234 said: I'm also glad it's being kept standard, I agree with Bren that a Duratec would spoil it. What these two gentlemen said! Modifying Fords has been done to death, it’s now normal and meh. Some cars need to remain standard imho and this is one of them. There’s nothing wrong with what you’ve already got anyway. alf892, Skizzer and Eyersey1234 2 1 Link to comment Share on other sites More sharing options...
LightBulbFun Posted October 21, 2019 Share Posted October 21, 2019 what the above said! the stock engine is part of its bASe appeal, which would be lost if you swapped it out much like the 2L O series lump in Dollywobblers Rover 820 for example (or any slow NA diesel!) so im glad you have decided to keep it stock BorniteIdentity 1 Link to comment Share on other sites More sharing options...
egg Posted October 21, 2019 Share Posted October 21, 2019 I would never, never modify my base... well apart from the headlight protectors, and the interior light from a ghia and the GLX wheel trims and the mudflaps. Anyhoo, keep going young man! BorniteIdentity and danthecapriman 1 1 Link to comment Share on other sites More sharing options...
danthecapriman Posted October 21, 2019 Share Posted October 21, 2019 9 minutes ago, egg said: I would never, never modify my base... well apart from the headlight protectors, and the interior light from a ghia and the GLX wheel trims and the mudflaps. Anyhoo, keep going young man! Transverse Pinto FTW! wuvvum, dozeydustman and egg 1 2 Link to comment Share on other sites More sharing options...
greengartside Posted October 21, 2019 Share Posted October 21, 2019 Glad you are keeping with the original engine, it’s done alright to last 36 years so it’s more than a fitting tribute it should get a few new parts. I also agree with the sentimental thing too. And I’d also walk past Ferrari’s, Lambo’s etc, to see this fine machine doing its thing. BorniteIdentity, Eyersey1234, danthecapriman and 1 other 4 Link to comment Share on other sites More sharing options...
BorniteIdentity Posted October 22, 2019 Author Share Posted October 22, 2019 10 hours ago, danthecapriman said: What these two gentlemen said! Modifying Fords has been done to death, it’s now normal and meh. Some cars need to remain standard imho and this is one of them. There’s nothing wrong with what you’ve already got anyway. It wasn’t really about Modz YO - just having absolute reliability with a decent increase in performance from a known engine/drivetrain. In the end, I just decided I want the bloody thing running - and the quickest path to that was rebuild. I would like to do a standard Ford with modern Drivetrain - just to have that balance of looks vs performance. But the reality is I get one day a week to play with them, so it will likely never happen. danthecapriman, egg and alf892 3 Link to comment Share on other sites More sharing options...
sierraman Posted October 22, 2019 Share Posted October 22, 2019 I don’t think fitting a more modern engine in it is a bad idea at all, certainly makes it a lot more useable, to my mind that’s what it’s all about. A 1.8 Zetec wouldn’t be a bad compromise. BlankFrank 1 Link to comment Share on other sites More sharing options...
BorniteIdentity Posted October 22, 2019 Author Share Posted October 22, 2019 It would have been easier to do - had this not been the last remaining Baser anywhere. Over the last 3 years, various digging/asking/probing hasn't revealed a single one - and the internet is very very good at unearthing cars. There are a few left that have been pimped, and one which didn't have the grey nose, but I think - as a sole survivor - it deserves to remain as intended. rob88h, Datsuncog, danthecapriman and 11 others 14 Link to comment Share on other sites More sharing options...
sierraman Posted October 22, 2019 Share Posted October 22, 2019 I get that but it’s not like knocking down the acropolis and building a McDonalds there. Replacing the engine is reversible if necessary. Link to comment Share on other sites More sharing options...
BorniteIdentity Posted October 22, 2019 Author Share Posted October 22, 2019 1 hour ago, sierraman said: I get that but it’s not like knocking down the acropolis and building a McDonalds there. Replacing the engine is reversible if necessary. Quite right. It just wasn’t necessary. ? mat_the_cat 1 Link to comment Share on other sites More sharing options...
Mally Posted October 22, 2019 Share Posted October 22, 2019 I don't see how it can be easier to fit a Duratec engine say, than recon and fit a pinto cylinder head. The head should have taken a week for machining, and a week for rebuilding at the most. You can build one in a day with everything to hand. The fact that it has been lying on a bench for months does not mean it was difficult. danthecapriman and alf892 1 1 Link to comment Share on other sites More sharing options...
Tadhg Tiogar Posted October 22, 2019 Share Posted October 22, 2019 4 hours ago, BorniteIdentity said: .... I think - as a sole survivor - it deserves to remain as intended. Any major modification means the genre becomes eggstinked. The Moog, egg and BlankFrank 3 Link to comment Share on other sites More sharing options...
sierraman Posted October 22, 2019 Share Posted October 22, 2019 I think he was getting at a Zetec being more reliable. Fundamentally it’s whoever owns its decision to do whatever with it, it’s quite easy to be prescriptive about it from afar but if a modification makes it easier to use and enjoy I’m all for it. I mean you wouldn’t chuck the basic dangly mirrors or the grey grill away but a 1.6 Zetec plumbed in properly would look fairly standard if you utilised Ford bits like the CVH sump and the myriad of other bits from the parts bin. It’s by the by now anyway as it’s had the engine sorted. What are your plans with the body? Link to comment Share on other sites More sharing options...
BorniteIdentity Posted October 22, 2019 Author Share Posted October 22, 2019 17 minutes ago, sierraman said: I think he was getting at a Zetec being more reliable. Fundamentally it’s whoever owns its decision to do whatever with it, it’s quite easy to be prescriptive about it from afar but if a modification makes it easier to use and enjoy I’m all for it. I mean you wouldn’t chuck the basic dangly mirrors or the grey grill away but a 1.6 Zetec plumbed in properly would look fairly standard if you utilised Ford bits like the CVH sump and the myriad of other bits from the parts bin. It’s by the by now anyway as it’s had the engine sorted. What are your plans with the body? There are two new doors for the driver’s side. They’re both the wrong red and one needs to be de-electrified which I’m hoping doesn’t prove too difficult. The rear quarter is actually sound but probably needs a bit more filling and fondling to improve things further. There’s a genuine bumper to go on the back too. The near side is pretty ace now it’s had the wing and rear 1/4 done. The dash is obvs fucked but only superior units now exist. It has leave to remain. Seats are super squashy after god knows how many miles! LightBulbFun, GrumpiusMaximus and RobT 3 Link to comment Share on other sites More sharing options...
sierraman Posted October 22, 2019 Share Posted October 22, 2019 Yeah it’d look really good with a Richard Grant or a Fibresports kit on it... Only kidding!!! No I think time and money spent on the body will be well spent. Could be worth the cost of a decent respray mat_the_cat 1 Link to comment Share on other sites More sharing options...
alf892 Posted October 22, 2019 Share Posted October 22, 2019 7 hours ago, Mally said: I don't see how it can be easier to fit a Duratec engine say, than recon and fit a pinto cylinder head. The head should have taken a week for machining, and a week for rebuilding at the most. You can build one in a day with everything to hand. The fact that it has been lying on a bench for months does not mean it was difficult. This. Absolutely no need for an engine change 'to keep up with modern traffic' or some other bollocks. Mind you i think the bloke that built it made the new cam and did it from a piece of bar using only a hand file......... danthecapriman and timolloyd 1 1 Link to comment Share on other sites More sharing options...
BorniteIdentity Posted October 25, 2019 Author Share Posted October 25, 2019 Today, in anticipation of Alf892’s visit tomorrow, I had to move the Sierra from the sidebar of shame to the garage - so we can work in relative dry. Easier said than done. Loose shingle, mud, sticky brakes meant that I had to unleash the PaedoBus™️ on the job. Here she is, moving for the first time since February. I really hope we can get to a state where it’s running and stopping tomorrow. If we get the new carb on then great, but it’d just be nice to make some progress. FullSizeRender.mov adw1977, rob88h, GrumpiusMaximus and 2 others 5 Link to comment Share on other sites More sharing options...
BorniteIdentity Posted October 25, 2019 Author Share Posted October 25, 2019 After about an hour of pushing and pulling - and me not realising my son had put the fucking handbrake on - we got it in! greengartside, Uncle Jimmy, rob88h and 25 others 24 4 Link to comment Share on other sites More sharing options...
BorniteIdentity Posted October 26, 2019 Author Share Posted October 26, 2019 She lives! More later. Off to celebrate! adw1977, RayMK, danthecapriman and 25 others 28 Link to comment Share on other sites More sharing options...
danthecapriman Posted October 26, 2019 Share Posted October 26, 2019 4 minutes ago, BorniteIdentity said: She lives! More later. Off to celebrate! Yay! Keep yer base alive! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now