tooSavvy Posted August 6, 2019 Author Share Posted August 6, 2019 I have been using, for years, a Halfraud ciggy tyre inflator. Has a dial to select 'cut-off' pressure <never worked, even new> ? Last week, popping a few pounds in, it began labouring and even stopped once <the on/off switch failed years ago and it is wired direct now> .... HOWEVER the end of the black ciggy 'plug-in' had melted/chewwy gum I have bought this >>> See if we get 20yr out of it...... *it has no on/off switch but I shall cut in a LazyBetty rocker switch. Jim Bell 1 Link to comment Share on other sites More sharing options...
Jim Bell Posted August 6, 2019 Share Posted August 6, 2019 I must have bought 5 of similar ones. I've no idea where they go but they do disappear like odd socks in the washing machine. Hopefully this new one lasts like the last one man. It put some good years service in. tooSavvy 1 Link to comment Share on other sites More sharing options...
tooSavvy Posted August 7, 2019 Author Share Posted August 7, 2019 My 'double socket' USB dash plugin/Voltmeter arrived earlier. Display is a Bright LED Red.... Not blue. Ign *Acc = 12.2V Ign on /not running + HRW switched on 11.9 dropping slowly Engine running = 14.1 (HRW has no effect on/off) *ciggy isn't 'always live'. Link to comment Share on other sites More sharing options...
Jim Bell Posted August 7, 2019 Share Posted August 7, 2019 Nice. I'm thinking of putting a piggyback double usb port in the Yaris. Simple mod. I've already hooked up a OBD2 temp gauge and volt gauge. tooSavvy 1 Link to comment Share on other sites More sharing options...
tooSavvy Posted August 8, 2019 Author Share Posted August 8, 2019 Got tyre inflator.... Chopped off 1/2 rubber air line & spliced the Halfrauds pipe + good solid clipon end. Screwed the whole thing into the 'old' bottom half of the Halfrauds pump casing, which is a heavy plastic moulding, to stop it 'skipping about'. Can't find the lazy-betty inline switch so I shall just switch on by Ign/Acc position..... Need to test it now Link to comment Share on other sites More sharing options...
tooSavvy Posted August 10, 2019 Author Share Posted August 10, 2019 DoubleCharger/Volts... Here (tickover) showing Charge Volts. .... Nice soft bloo glow too! egg and Jim Bell 2 Link to comment Share on other sites More sharing options...
tooSavvy Posted August 20, 2019 Author Share Posted August 20, 2019 The centre exhaust section [crispy end/gumgum wrapped] has finally given up the ghost ? ..... My mates @ATS couldn't get a price through their stockist [quelle normal] as it's So Old. 2 mins Googlefu had me a Leeds stockist @£24, inc Del !! ? Courier today or Wed - they pongged me to confirm fitting/uk reg no. ATS lads will fit it for me.... Winnah Chicken Dinnah Jim Bell, loserone and egg 3 Link to comment Share on other sites More sharing options...
tooSavvy Posted August 20, 2019 Author Share Posted August 20, 2019 As an aside, to above Winnings.... I visited 'Exhaust Doctor', Shiremoor, to just ask if they might 'fabb up' my DIY 'clamporama' T4 backbox so it was solid pipe - some pipe + mig. Guy says bring your own mid ex pipe and it would be around £100/120... and a slot in 2weeks. Call that a 'pass', then ? stonedagain and Jim Bell 2 Link to comment Share on other sites More sharing options...
tooSavvy Posted August 21, 2019 Author Share Posted August 21, 2019 Hmm.... that went well ? Stockist has 'stock misallocation' = no pipe... Refund in motion and further digging required. ? Link to comment Share on other sites More sharing options...
tooSavvy Posted August 23, 2019 Author Share Posted August 23, 2019 On 8/21/2019 at 11:59 AM, tooSavvy said: Hmm.... that went well ? Stockist has 'stock misallocation' = no pipe... Refund in motion and further digging required. ? Gochaa! Deffo 'on the shelf' and ordered just now - when PayPal refunded the previous charge back onto my Pockit card.... Link to comment Share on other sites More sharing options...
tooSavvy Posted August 27, 2019 Author Share Posted August 27, 2019 DHL have boingged me.... Pipe due between 3 and 4 today [ drop 73 ] egg 1 Link to comment Share on other sites More sharing options...
tooSavvy Posted August 27, 2019 Author Share Posted August 27, 2019 Dropped off 4:15..... It is now at the ATS depot. Booked in for fitting 4pm Friday. egg and Jim Bell 2 Link to comment Share on other sites More sharing options...
tooSavvy Posted August 28, 2019 Author Share Posted August 28, 2019 Bloody bonnet refused to 'poingg' last night... Had the anklebiter rest her @$$ on the edge... Still nowt. Thismorning I set about a plan to remove the drivers kick panel, where the lever is mounted, for some Bad@$$ cable heaving >> thought I might try ONE MORE heave = Poingg OPEN !! Lathered it with Poondies 'fizzy' spraygrease & wapped it half a dozen times >> drop/poingg/drop/poingg.... All OK ? jumpingjehovahs, Jim Bell and egg 3 Link to comment Share on other sites More sharing options...
tooSavvy Posted August 30, 2019 Author Share Posted August 30, 2019 Ffff nelll.... "...there's a hole in my bucket!!.." Got mid pipe fitted fine My 'three times lucky' front pipe is blowing like fcuk @manifold flange. The last time they [re]fitted the front pipe, the fitter commented "these bastard fine thread Toyota studs are cnuts for stripping!!" = he didn't lean on them = hence now blowing of course My man is ordering three new studs and will remove (gas ftw) and replace/retighten the manifold flange... Old cars? Who'd avvemm Link to comment Share on other sites More sharing options...
tooSavvy Posted September 5, 2019 Author Share Posted September 5, 2019 Studs are now in hand @ATS ... hopefully a slot in the morning YaY! egg 1 Link to comment Share on other sites More sharing options...
egg Posted September 5, 2019 Share Posted September 5, 2019 On 8/10/2019 at 5:18 PM, tooSavvy said: DoubleCharger/Volts... Here (tickover) showing Charge Volts. Nice giffer touch. I fancy one - but it's hidden behind a cover on both my vehicles tooSavvy 1 Link to comment Share on other sites More sharing options...
tooSavvy Posted September 7, 2019 Author Share Posted September 7, 2019 Saga of Exhuaust.... Is exhausted! ..... I have had my mates, @ATS Wallsend, fit my centre pipe [sourced through Ebay as they couldn't get one] and - just now - spend two hours (with Oxy bottles) replacing 3 manifold studs + nuts. F.O.C. as it was blowing, after the previous 'Warranty' downpipe replacement.... Winnah rainagain, Jim Bell, paulplom and 1 other 4 Link to comment Share on other sites More sharing options...
tooSavvy Posted September 10, 2019 Author Share Posted September 10, 2019 CarParts4Less @£3.06 delivered.... Hardly worth driving about looking Due 12m oil change cycle (on about 6k) Jim Bell, privatewire, egg and 1 other 4 Link to comment Share on other sites More sharing options...
tooSavvy Posted September 12, 2019 Author Share Posted September 12, 2019 Bored + Itchy 'trigger finger' = impulse Ebay buy 5m OTG android boroscope.... £7.99 I want to look into my sills... ... Chassis rails ... Sunroof runner/drain holes [cassette in roof so can't see anything] ... Behind kitchen cupboards ... Under bath ... Will think of more elaborate excuses when SWMBO picks up package from door mat * just arrived @Sat am... Excellent but (so web says) getting a stable display app is the bugga ? Images crystal clear but keep dropping out. ** 'USB Camera' app (look for ShenYau) = sorted gr9 rainagain and Jim Bell 2 Link to comment Share on other sites More sharing options...
tooSavvy Posted September 13, 2019 Author Share Posted September 13, 2019 On 9/10/2019 at 1:44 PM, tooSavvy said: CarParts4Less @£3.06 delivered.... Hardly worth driving about looking Due 12m oil change cycle (on about 6k) ...... Ding Dongg Now >> sorting a dry day..... Link to comment Share on other sites More sharing options...
tooSavvy Posted September 20, 2019 Author Share Posted September 20, 2019 Today....... I will mostly be >>>>> Oil Change Jim Bell 1 Link to comment Share on other sites More sharing options...
tooSavvy Posted September 20, 2019 Author Share Posted September 20, 2019 .... I slit up the undertray (last change) and it makes the oil filter much easier to access. Downside is the plastic tray flops down = I ferreted out a piece of alloy plate, folded it back V and then crimped it onto the plastic tray edge + bent it up into an upcurve ... Tray unseen After doing the oil.... I did the wiper arms with Poondies mattblack, greased the sunroof servo cables with Poondies spraygrease, did a bit of wheelarch smartening..... *20 minutes in bright sunlight got it well hot/pressured up/water thin GR9 Up on the ramps, at the back, I sprayed my Comma 'totalrustcure' aerosol vapour [easily guided out from the straw-on-cap] all over the suspension & fuel tank pipes & brakepipes & innerwheel lips & all along sill lower lips.... Not a drop got onto me!! egg 1 Link to comment Share on other sites More sharing options...
tooSavvy Posted October 6, 2019 Author Share Posted October 6, 2019 MOT next Tuesday, 08:30...... Yes, I agree, not news really...... egg and brandersnatch 2 Link to comment Share on other sites More sharing options...
tooSavvy Posted October 8, 2019 Author Share Posted October 8, 2019 On 10/6/2019 at 10:15 AM, tooSavvy said: MOT next Tuesday, 08:30...... Yes, I agree, not news really...... Boring............ *... as a whistle. egg and loserone 2 Link to comment Share on other sites More sharing options...
tooSavvy Posted October 10, 2019 Author Share Posted October 10, 2019 I would have no argument with anyone here, accusing me of Bodgitt n'Scarper detailing. ToMM© delivering as she did, a Clean Sheet MOT on Tuesday does her part but - titivating prerequisites to the fore... I needed paint! Nigh enough for galloping horses/cheap old stock£ will do I scored this Hycote @theRange £4.99 Vx Metroblue_metallic by tooSavvy, on Flickr ...... WBOD grade fix, aye egg 1 Link to comment Share on other sites More sharing options...
tooSavvy Posted October 22, 2019 Author Share Posted October 22, 2019 Annual 'wallet fillet' from DirectLine flopped onto the mat yesterday. £207 all in. 3 years now with virtually no drift..... I think they want my money egg 1 Link to comment Share on other sites More sharing options...
tooSavvy Posted December 9, 2019 Author Share Posted December 9, 2019 $hite and thrice....! Anklebiter #2, one of the other gk, was in the back and asked me if she could drop the window for some freshair - simultaneously enquiring where the handle was? I deftly stroked 'my' rear window controller and impressed said maggot muchly by such levitational slight-of-hand ..... Muchly was I embarrassed by the reluctance of the window to ascend, moments later I jumped out of the car, having dropped my drivers window, reached in and 'pwr up' the back window whilst pulling.... It whirred falteringly up to a good tight close.... I blame it never moving in 3yr (..... if ever, who knows)..... Now on my 2DO list. **L8 noose** Judicious application of Halfrauds Silicone Lube + a dozen or so 'up/down' has normal service resumed egg 1 Link to comment Share on other sites More sharing options...
tooSavvy Posted December 22, 2019 Author Share Posted December 22, 2019 Heyy FCKU You, baybbeee ? Parked up in Silverlink, in a bay. Gets back and the original car on my side has gone and a 'trendee faymilee' have crushed their hatch into it with Zero% door space for a portly fellah... I squeeze inelegantly in (whilst Pa heaves the pushhy out the back) all the time being stared at by Arabella, an 8yr old in the drivers seat... KaffwaKKK.... Arabella shoulder charges the drivers door open, into mine! She runs into the arms of Pa, as he remonstrates [don't let me see you do that into Uncle Rodericks Tesla!!] all the while fuckking glowering at ME!! I got her started up, powered the window down as I reversed back out shouts "Aye... Lucky it wasn't a new one!" ...... fuckkkkingggg arsewipes grrrrrrrr Jim Bell, stonedagain and egg 3 Link to comment Share on other sites More sharing options...
tooSavvy Posted December 31, 2019 Author Share Posted December 31, 2019 Started getting the 'kdink kdonk' of exhaust touching rear crossmember AGAIN .... The whole 'ensemble' is tightly U-clamped but, when the centre pipe was replaced, everything got yankked about and this has resulted in some movement. Oh.... For a welder! I could have lashed up my backbox pipework and blazzed it solid - fit n forget!! Instead, I spent a chilly 1/2hr lying in the lane [up on the ramps] retightening bracketry whilst pushing the system up..... Silence restored Jim Bell and egg 2 Link to comment Share on other sites More sharing options...
tooSavvy Posted December 31, 2019 Author Share Posted December 31, 2019 Sidelight bulb off..... Simple bayonet glasser = oe spanner through bodywork/inner wing hole to make holder 1/4turn so I could swap Sorted Jim Bell and egg 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now