Jump to content
scdan4

V70 tdi. Oi, do ya wanna see my Throbber?

Recommended Posts

That bit hiding up behind the air filter and infront of the turret

post-19553-0-40422200-1464464872_thumb.jpg

made a prolonged, loud, farty vibratey noise (loud enough to be clearly audible in the cabin with the radio on) twice today, both times it did it the nose was pointing down a steep hill and we had just parked and turned off the engine.

It goes on for best part of a minute, so managed to track it down. Initial impressions are fuck knows what it is but it's clearly been bodged in the past. The yellow hose has clearly been disconnected sometime, by someone, for some reason, somewhere.

post-19553-0-43084100-1464465135_thumb.jpg

Thats the blighter.

Does someone want to tell me why it's blowing raspberries at me?

post-19553-0-01213900-1464465259_thumb.jpg

Share this post


Link to post
Share on other sites

The farting is probably a vac leak via what looks like a previous electrical tape repair.

 

I'd agree that it's most likely an EGR solenoid, possibly a boost control solenoid.

 

See if you can follow the hoses and see what they connect to to be sure.

Share this post


Link to post
Share on other sites

The farting is probably a vac leak via what looks like a previous electrical tape repair.

 

I'd agree that it's most likely an EGR solenoid, possibly a boost control solenoid.

 

See if you can follow the hoses and see what they connect to to be sure.

it is indeed the egr solenoid

Share this post


Link to post
Share on other sites

27242200061_2b1f2a6c5d_b.jpg

 

That's interesting*

 

You've blocked the feed to the valve, mine had the feed to the pipe blocked off (rather than the valve body).

 

So I've really reached deep for engineering professionalism, and fired an 8 x 1 woodscrew up it.

 

post-19553-0-83552200-1464598807_thumb.jpg

 

 

In other exiting* news the bumpers jaunty angle

 

post-19553-0-08564000-1464598994_thumb.jpg

 

is caused by the "they all do that sir" bumper mounts rusting through. 

 

post-19553-0-36550000-1464599096_thumb.jpg

 

The towbar seems to be holding it on and new mounts are £40, so may just ignore that.

Share this post


Link to post
Share on other sites

JD did it before he sold me the car, it's not given any bother so I have left it alone.

 

I might be able to help you with bumper mounts, but probably not. I have a feeling they are just as bad on our spares car.

Share this post


Link to post
Share on other sites

JD did it before he sold me the car, it's not given any bother so I have left it alone.

 

I might be able to help you with bumper mounts, but probably not. I have a feeling they are just as bad on our spares car.

 

I'd be grateful if you have a squiz tho! thanks. 

 

I do have 40 quid, but i'd much rather keep as much of it as possible in my pocket. 

 

 

Sutty - do you happen to know if the previous owner stuck a blanking plate in as well when he blocked off the hoses? 

 

 

Also, brake performance at idle/cold is mega shite (nearly rammed a couple of things wriggling out of tight spots since i've got it. The pedal needs proper standing on and is very wooden. Dodgy hose to the servo would be my first guess. Not looked yet.

Share this post


Link to post
Share on other sites

 

 

Sutty - do you happen to know if the previous owner stuck a blanking plate in as well when he blocked off the hoses? 

 

 

Also, brake performance at idle/cold is mega shite (nearly rammed a couple of things wriggling out of tight spots since i've got it. The pedal needs proper standing on and is very wooden. Dodgy hose to the servo would be my first guess. Not looked yet.

 

Cant remember, I wasnt paying attention to the bloke waffling on about it, just caught evry other bit of interesting information. Fordperv may have been listening more tho.

 

As for the brakes, I seam to remember doing that on my drive but never payed much attention to it, it was always fine half way down my street ..... if you're on Facetube, join a group called volvo V70 owners, theres loads of people on there with these... they might be able to shed some more light. I know a bloke on facebook that brakes these V70s too, he might have some bumper mounts, I'll send him a messarge.

Share this post


Link to post
Share on other sites

Cant remember, I wasnt paying attention to the bloke waffling on about it, just caught evry other bit of interesting information. Fordperv may have been listening more tho.

I was doing the same to be fair, I can't remember what he said regarding the egr

Share this post


Link to post
Share on other sites

Cant remember, I wasnt paying attention to the bloke waffling on about it, just caught evry other bit of interesting information. Fordperv may have been listening more tho.

 

As for the brakes, I seam to remember doing that on my drive but never payed much attention to it, it was always fine half way down my street ..... if you're on Facetube, join a group called volvo V70 owners, theres loads of people on there with these... they might be able to shed some more light. I know a bloke on facebook that brakes these V70s too, he might have some bumper mounts, I'll send him a messarge.

 

Halfway down the street and they're ok, but we're tight on road parking round here, so every driving adventure begins with wiggle forward, full lock, wiggle back, full lock, wiggle forward yada yada yada. I'm finding start, footbrake on (normal pressure like), select gear, handbrake off and OH MY JESUS CHRIST nearly slam it into the neighbours car a bit of a strain on my heart. I'm not as young as I was and can't afford lose any more hair.

 

Mounts would be good if you'd be kind enough to ask. I don't do faceache i'm afraid!

 

It might be the same problem but the servo is driven by a cam driven vac pump on the diesels, they get tired and may take a moment to build up a vacuum.

 

I'm going to have a nose - I hadn't noticed that link wasn't a diesel one! The symptoms he describes are spot on so i'll have a delve and see what I can find / test.

 

Not having a manometer though, i have no idea how i'll test a pumps effectiveness. I did notice some of the vac hoses present were pretty cracked and tatty when I was having a nose at the egr, could have something to do with it.

 

 

In other news, i've done a couple of long trips today and yesterday so used them as a economy run. Sat at 60mph on cruise control it has done...

 

...nearly 60 to a gallon.

 

I'm genuinely a bit gobsmacked about that.

Share this post


Link to post
Share on other sites

I've just had a good look at the brakes and bits.

 

The servo seems to be entirely powered by the cam driven vac pump 

 

The vac pipe to the servo looks old, but also ok as far as i could see. It does have the most tortuous route around the engine bay though, bits are buried under the fuse box and air filter box etc, so can't see them. 

 

So I assume the pump has had it.

 

parts for saabs have one but it's over 100 quid.

 

Do they all do that, or if I get one from a breaker should it be a lot better than the one on there? (which, in mitigation has done 200k)

Share this post


Link to post
Share on other sites

To answer my own questions i did some nosing on the internet. 

 

Lots of vw owners reporting sludge in the pump making it noisey and ineffective.

 

So bravely got stuck in today.

 

The pump is at the front in the middle of the engine, so easy to get at, but also heavily obstructed by fuel lines and the like, which made getting the bottom nut off a complete pig of a job, but managed to slide a spanner down there and tease it off.

 

post-19553-0-16038100-1465500729_thumb.jpg

 

pump off

 

post-19553-0-73964000-1465500784_thumb.jpg

 

stripped and washed - no pics of the sludge im afraid as my hands were very manky by that point, but there was plenty off it.

 

post-19553-0-19487700-1465500828_thumb.jpg

 

Back together was as much of a bitch as taking it off, but fitted.

 

And wayhey. brakes. hurrah for that.

 

job well done and all for nowt. My favourite price. 

Share this post


Link to post
Share on other sites

Just a thought, the same engine is used in various vw's so may be cheaper at a VW breaker?

 

yes, during my searching for this i found out it had an audi engine.

 

was a surprise to me. Will now tell my friends i/ve reached the heady heights of driving an audi.

Share this post


Link to post
Share on other sites

I had a look at the bumper mounts on the breaker at the weekend and they are indeed buggered I'm afraid.

 

Thanks for looking. Flushed with vacuum pump success I've just ordered some new ones off ebay. 

 

35 quid delivered - not the end of the world.

Share this post


Link to post
Share on other sites

I'm tempted to strip down my own vacuum pump now. Was it just a case of taking it to bits, cleaning it and putting it back together?

 

yep. 

 

Popped the top plate off it (6 torx screws) and gave the whole thing a good wash in white spirit.

 

It was all covered in oil sludge, including the 3 little valves, so would explain nicely why it was not very effective.

 

Well worth it for the 3 hours or so it took. (and most of that was doing the bottom mounting nut!)

Share this post


Link to post
Share on other sites

New bumper bracket time.

 

old bumper brackets have seen better days.

 

post-19553-0-94139600-1467918315_thumb.jpg

 

the towbar was the only thing holding it on, so had to be dropped to allow the bumper off

 

post-19553-0-77510400-1467918354_thumb.jpg

 

which allowed me to discover this reassuring delight. 

 

post-19553-0-56090400-1467918445_thumb.jpg

 

(we do have a bit of nose weight in the trailer, yes).

 

Back on was a relative delight with new bolts (some stainless, gurt posh), copperslip and brackets. Nothing seized at all. Marvellous. Went so well that I didn't take any photos of the bumper now back on, lined up, straight and true. But I promise i managed it. 

 

So we took it for a wash to celebrate.

 

post-19553-0-50912800-1467918525_thumb.jpg

 

 

Next on the niggle list is the gear shifter release button has broken. This, obviously, results in the ignition key getting stuck in the ignition. (Took me some working out that one). Anyone got one they don't want?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By dozeydustman
      Just about an hour ago I went to start my car up, had Mrs Dustman with me, to go and pick Miss Dustman up from work. Turned over fine but took a while to fire up.
       
      Steering felt heavy. Thought maybe as it's currently -5 + wind chill it's just cold & the fluid is thick.
       
      Started reversing out my bay then I was greeted with:
      "DING DONG" - ABS fault.
      "DING DONG" - ESP fault
      "DING DONG" - headlamp auto levelling not working, contact service.
       
      I shut the car down straight away and we went in Mrs D's Corolla.
       
      Alternator is less than 2 months old, it's a recon unit from Alternator Man in Portsmouth. Hoping the cold isn't killing the battery and it's taking the 'nator out with it (battery passed the drop test last time the no-charge warning came up). Looks like a session with the multimeter after work tomorrow.....
       
      MEH.
    • By dozeydustman
      Mrs Dustman has a dash cam she wants me to fit to her '99 frog face Corolla. It came with a hard wire kit as opposed to the usual fag lighter lead, so I might as well make a decent* job of it and hide the wiring completely. Trouble is I can't remember how I got the radio pod out when I fitted the DAB unit she now has. I've also got a few dash illumination bulbs to change so I might as well do it all in one hit while it's a sunny afternoon.
       
      A bit of googling comes up with the US spec dash which appears to be different from the European model, or the 2002-on model. I seem to remember spudging out the dash vents to access some bolts/rivets.
       
      Failing that, is there an easier place to get a switched live from (besides the radio) that doesn't involve destroying the car's interior?
    • By 1970mgb
      So, someone posted on another thread a link to an Ebay listing for an LHD '74 Marina listed on Ebay.
      I called a little while ago and talked to the seller, and the story is that it was a good running and driving car 10 years ago, but has been neglected and won't run. I'm debating with myself about whether or not I want to take it on as a project.
      I know these had a terrible reputation when new, but at the same time they're actually legitimately rare in the US. I have seen one in person, and most of the estimates I've seen put the number of survivors at 10-20(although I don't know how much we can trust that).
      There's some definite appeal in the engine familiarity for me with the MGB. I MIGHT have to convert it to a manual though. In addition, there's the issue of having it shipped a couple hundred miles to me. It's listed now for $700...if I could do $500 it might be a make or break for me.
      Any thoughts here on it?
       
      EDIT: The car as it sits now is an automatic. If I swapped the transmission, it would be to a manual. Sorry for any confusion from my incorrect statement!
    • By blackboilersuit
      After many a long year of occasional contribution on here I've probably got enough old shite on fleet now to do something I should have done yonks ago and start a project thread.
      The story so far.........
      I had an 02 CRV for 6 years and it performed faultlessly as an car taking everything in it's stride. The only issue with it was the 25mpg it returned but as I worked close to home that wasn't an issue. Cue December last year and a new job saw my commute go up from 4 miles a day to 32 miles a day.

      By March I was drowning in green shield stamps so  bought the mighty diesel disAstra from Davehedgehog of this here parish. Shown here on the only off-road parking and only second car parking space I have. The garage contains a few motorbikes so I've always stubbornly stuck to a single car rule so I don't have to move motors to get bikes in and out. More on this detail in a bit.....

      A combination of broken motorcycles needing worked on, a bike trip around the Baltic and work meant that I soon realised that I had no time to prep the disAstra for its MOT  at the start of this month. It wasn't worth enough to pay to have the work done so I decided that the poor old thing would be scrapped in favour of a replacement motor.........
      The mighty Volvo (V70 D5) was purchased from Ma & Pa forddeliveryboy of this parish and migrated north of the border back to it's natural home.

      Three days after being pressed into commuting service the mighty volvo suffered a (badly) sticking caliper and much burning brake smells that had to be stripped and rebuilt before work the next day. Sticking piston at that so the whole thing was off and the brakes had to be bled afterwards. Two and a half hours in the pissing rain was a bit character building especially as the still MOT'd (by 3 days) and taxed (but not insured) astra was sitting on the drive. Decision made, insurance checked and a soon to be taken out Admiral multi-car policy will see me with two cars on the fleet again. I could have used one of the bikes but motorway commuting in the pissing rain on two wheels is no fun. The volvo needs an MOT in december so having the astra back on the road will take the pressure off getting that done if it needs work and the weather is bad.
      And so as the volvo continues to provide daily service, project astra revival starts. Known MOT work needed is frilly arches,  broken number plate and front discs and pads so nothing major. Thus far the arches have been sorted without resort to duct tape.
      After a bit of prodding.......

      And after the angle grinder was let loose surprisingly it was only the return lip that was rotten so the welder was broken out to lash on some roughly cut fresh metal.

      Linished off filled, sanded and primed. Note the use of a farmfoods brochure pulled out the bin being used as masking paper for extra shite points.

      Followed by a near perfect colour matched (*) top coat....

      Well I had black on the shelf and it's good enough to stop the primer soaking up the water so that'll do for now.
      Hoping to get brakes and MOT sorted in the coming week so more to follow soon (hopefully).
×
×
  • Create New...