Jump to content
scdan4

V70 tdi. Fucked. Again.

Recommended Posts

That bit hiding up behind the air filter and infront of the turret

post-19553-0-40422200-1464464872_thumb.jpg

made a prolonged, loud, farty vibratey noise (loud enough to be clearly audible in the cabin with the radio on) twice today, both times it did it the nose was pointing down a steep hill and we had just parked and turned off the engine.

It goes on for best part of a minute, so managed to track it down. Initial impressions are fuck knows what it is but it's clearly been bodged in the past. The yellow hose has clearly been disconnected sometime, by someone, for some reason, somewhere.

post-19553-0-43084100-1464465135_thumb.jpg

Thats the blighter.

Does someone want to tell me why it's blowing raspberries at me?

post-19553-0-01213900-1464465259_thumb.jpg

Share this post


Link to post
Share on other sites

The farting is probably a vac leak via what looks like a previous electrical tape repair.

 

I'd agree that it's most likely an EGR solenoid, possibly a boost control solenoid.

 

See if you can follow the hoses and see what they connect to to be sure.

Share this post


Link to post
Share on other sites

The farting is probably a vac leak via what looks like a previous electrical tape repair.

 

I'd agree that it's most likely an EGR solenoid, possibly a boost control solenoid.

 

See if you can follow the hoses and see what they connect to to be sure.

it is indeed the egr solenoid

Share this post


Link to post
Share on other sites

27242200061_2b1f2a6c5d_b.jpg

 

That's interesting*

 

You've blocked the feed to the valve, mine had the feed to the pipe blocked off (rather than the valve body).

 

So I've really reached deep for engineering professionalism, and fired an 8 x 1 woodscrew up it.

 

post-19553-0-83552200-1464598807_thumb.jpg

 

 

In other exiting* news the bumpers jaunty angle

 

post-19553-0-08564000-1464598994_thumb.jpg

 

is caused by the "they all do that sir" bumper mounts rusting through. 

 

post-19553-0-36550000-1464599096_thumb.jpg

 

The towbar seems to be holding it on and new mounts are £40, so may just ignore that.

Share this post


Link to post
Share on other sites

JD did it before he sold me the car, it's not given any bother so I have left it alone.

 

I might be able to help you with bumper mounts, but probably not. I have a feeling they are just as bad on our spares car.

Share this post


Link to post
Share on other sites

JD did it before he sold me the car, it's not given any bother so I have left it alone.

 

I might be able to help you with bumper mounts, but probably not. I have a feeling they are just as bad on our spares car.

 

I'd be grateful if you have a squiz tho! thanks. 

 

I do have 40 quid, but i'd much rather keep as much of it as possible in my pocket. 

 

 

Sutty - do you happen to know if the previous owner stuck a blanking plate in as well when he blocked off the hoses? 

 

 

Also, brake performance at idle/cold is mega shite (nearly rammed a couple of things wriggling out of tight spots since i've got it. The pedal needs proper standing on and is very wooden. Dodgy hose to the servo would be my first guess. Not looked yet.

Share this post


Link to post
Share on other sites

 

 

Sutty - do you happen to know if the previous owner stuck a blanking plate in as well when he blocked off the hoses? 

 

 

Also, brake performance at idle/cold is mega shite (nearly rammed a couple of things wriggling out of tight spots since i've got it. The pedal needs proper standing on and is very wooden. Dodgy hose to the servo would be my first guess. Not looked yet.

 

Cant remember, I wasnt paying attention to the bloke waffling on about it, just caught evry other bit of interesting information. Fordperv may have been listening more tho.

 

As for the brakes, I seam to remember doing that on my drive but never payed much attention to it, it was always fine half way down my street ..... if you're on Facetube, join a group called volvo V70 owners, theres loads of people on there with these... they might be able to shed some more light. I know a bloke on facebook that brakes these V70s too, he might have some bumper mounts, I'll send him a messarge.

Share this post


Link to post
Share on other sites

Cant remember, I wasnt paying attention to the bloke waffling on about it, just caught evry other bit of interesting information. Fordperv may have been listening more tho.

I was doing the same to be fair, I can't remember what he said regarding the egr

Share this post


Link to post
Share on other sites

Cant remember, I wasnt paying attention to the bloke waffling on about it, just caught evry other bit of interesting information. Fordperv may have been listening more tho.

 

As for the brakes, I seam to remember doing that on my drive but never payed much attention to it, it was always fine half way down my street ..... if you're on Facetube, join a group called volvo V70 owners, theres loads of people on there with these... they might be able to shed some more light. I know a bloke on facebook that brakes these V70s too, he might have some bumper mounts, I'll send him a messarge.

 

Halfway down the street and they're ok, but we're tight on road parking round here, so every driving adventure begins with wiggle forward, full lock, wiggle back, full lock, wiggle forward yada yada yada. I'm finding start, footbrake on (normal pressure like), select gear, handbrake off and OH MY JESUS CHRIST nearly slam it into the neighbours car a bit of a strain on my heart. I'm not as young as I was and can't afford lose any more hair.

 

Mounts would be good if you'd be kind enough to ask. I don't do faceache i'm afraid!

 

It might be the same problem but the servo is driven by a cam driven vac pump on the diesels, they get tired and may take a moment to build up a vacuum.

 

I'm going to have a nose - I hadn't noticed that link wasn't a diesel one! The symptoms he describes are spot on so i'll have a delve and see what I can find / test.

 

Not having a manometer though, i have no idea how i'll test a pumps effectiveness. I did notice some of the vac hoses present were pretty cracked and tatty when I was having a nose at the egr, could have something to do with it.

 

 

In other news, i've done a couple of long trips today and yesterday so used them as a economy run. Sat at 60mph on cruise control it has done...

 

...nearly 60 to a gallon.

 

I'm genuinely a bit gobsmacked about that.

Share this post


Link to post
Share on other sites

I've just had a good look at the brakes and bits.

 

The servo seems to be entirely powered by the cam driven vac pump 

 

The vac pipe to the servo looks old, but also ok as far as i could see. It does have the most tortuous route around the engine bay though, bits are buried under the fuse box and air filter box etc, so can't see them. 

 

So I assume the pump has had it.

 

parts for saabs have one but it's over 100 quid.

 

Do they all do that, or if I get one from a breaker should it be a lot better than the one on there? (which, in mitigation has done 200k)

Share this post


Link to post
Share on other sites

To answer my own questions i did some nosing on the internet. 

 

Lots of vw owners reporting sludge in the pump making it noisey and ineffective.

 

So bravely got stuck in today.

 

The pump is at the front in the middle of the engine, so easy to get at, but also heavily obstructed by fuel lines and the like, which made getting the bottom nut off a complete pig of a job, but managed to slide a spanner down there and tease it off.

 

post-19553-0-16038100-1465500729_thumb.jpg

 

pump off

 

post-19553-0-73964000-1465500784_thumb.jpg

 

stripped and washed - no pics of the sludge im afraid as my hands were very manky by that point, but there was plenty off it.

 

post-19553-0-19487700-1465500828_thumb.jpg

 

Back together was as much of a bitch as taking it off, but fitted.

 

And wayhey. brakes. hurrah for that.

 

job well done and all for nowt. My favourite price. 

Share this post


Link to post
Share on other sites

Just a thought, the same engine is used in various vw's so may be cheaper at a VW breaker?

 

yes, during my searching for this i found out it had an audi engine.

 

was a surprise to me. Will now tell my friends i/ve reached the heady heights of driving an audi.

Share this post


Link to post
Share on other sites

I had a look at the bumper mounts on the breaker at the weekend and they are indeed buggered I'm afraid.

 

Thanks for looking. Flushed with vacuum pump success I've just ordered some new ones off ebay. 

 

35 quid delivered - not the end of the world.

Share this post


Link to post
Share on other sites

I'm tempted to strip down my own vacuum pump now. Was it just a case of taking it to bits, cleaning it and putting it back together?

 

yep. 

 

Popped the top plate off it (6 torx screws) and gave the whole thing a good wash in white spirit.

 

It was all covered in oil sludge, including the 3 little valves, so would explain nicely why it was not very effective.

 

Well worth it for the 3 hours or so it took. (and most of that was doing the bottom mounting nut!)

Share this post


Link to post
Share on other sites

New bumper bracket time.

 

old bumper brackets have seen better days.

 

post-19553-0-94139600-1467918315_thumb.jpg

 

the towbar was the only thing holding it on, so had to be dropped to allow the bumper off

 

post-19553-0-77510400-1467918354_thumb.jpg

 

which allowed me to discover this reassuring delight. 

 

post-19553-0-56090400-1467918445_thumb.jpg

 

(we do have a bit of nose weight in the trailer, yes).

 

Back on was a relative delight with new bolts (some stainless, gurt posh), copperslip and brackets. Nothing seized at all. Marvellous. Went so well that I didn't take any photos of the bumper now back on, lined up, straight and true. But I promise i managed it. 

 

So we took it for a wash to celebrate.

 

post-19553-0-50912800-1467918525_thumb.jpg

 

 

Next on the niggle list is the gear shifter release button has broken. This, obviously, results in the ignition key getting stuck in the ignition. (Took me some working out that one). Anyone got one they don't want?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By danthecapriman
      As many of you might have read on the grin thread and my thread about yank headlights on Volvo 740's, I should have acquired myself this one. I've just got a few pics of said Volvo pre rescue as it sits.
       
      For those who don't know, it's an 88 740 estate in 2.3 auto GLE spec (my favourite!) which was owned by my sisters boyfriends grandad. He passed away this year and the cars just been sat unused since mid 2015.
      The family are clearing the property and I was told the Volvo and others were going to most likely go for scrap. I said I'd take the Volvo and asked for a price only to be told I could have it!
       
      The Wolseley 1300 apparently is already spoken for so hopefully that will be saved or at least donate some parts. The Volvo should become mine at some point but the caravan and Omega will probably get weighed in.
       
      So here are the few pics I have to go on.
       
      IMG_0331 by Dan Clark, on Flickr
       
      IMG_0332 by Dan Clark, on Flickr
       
      IMG_0329 by Dan Clark, on Flickr
       
      IMG_0333 by Dan Clark, on Flickr
       
      The Volvo looks ok from the little I can see and having run an MOT history check it seems a good one. It's a low miler at 90k and seems to of only done a couple of thousand miles between tests. Most of the fails seem to be for stupid stuff.
       
      So the plan at the moment will be to try to get it running and moving then try to get it back home. At the moment it's a 100 miles or so away.
       
      To be continued...
    • By snagglepuss
      Didn't bother to do a collection thread as was a 30min drive so fairly boring.
       
      Yesterday I won this
       

       
      Which is effectively going to replace the civic and the xantia.
       

       
      Picked car from a bodywork guy in foreign lands (Yorkshire).
       
      First thoughts are that I think it has been sitting for a while but started straight up. Apart from service bits and potentially a cambelt everything seems to be good with it. Comes pre dented.
       
      Current is differently abled tax so that will need to be changed.
       
      Windscreen has small crack in passenger side.
       
      Runs really cold, this is after 30 miles of motorway

       
      Mind you it honks. Properly honks. Not as much as the focus I got from Shadow but not far off.
       

       
      List of jobs
       
      Oil change
      Spark plugs
      Air filter
      Thermostat
      Rear boot struts
      Front discs and pads
      Cam belt plus bits
      Ball joints
      Drop links
      Rear anti roll bar bushes
      Stereo code
      Windscreen crack
      Swimming pool emptied from boot wheel well
      Seal rear light clusters
       
      And a big does of cleaning
×
×
  • Create New...