Jump to content

Domes shonky autos-Range Rover MOT day-PRAY4ME


dome

Recommended Posts

Not much has been happening of late as mojo has been low and the fleet has mostly been behaving itself. 

Today, A Good Thing happened. The Manta 400 kit arrived😁

The guys who made it are rallying in Arbroath this weekend so offered to drop it off. A small gift was supplied by me to say thanks. Scottishy goodness

IMG_20210924_174630.thumb.jpg.5f107b8561c23523f4a53e43f1e05444.jpg

As delivered

IMG_20210924_185628.thumb.jpg.92b281f363cac0a148d09e0ac10f5a8b.jpg

Trial fitIMG_20210924_185652.thumb.jpg.4f604700c5a5758e81530a932995bf6e.jpg

Laid out. Hopefully it won't get this close to a tree when it's fitted to the carIMG_20210924_190235.thumb.jpg.ab8868a1f450fd16e0eb18999c6dba1c.jpgIMG_20210924_190202.thumb.jpg.66dd5ef9fea348372256006bc2376f67.jpg

Link to comment
Share on other sites

  • dome changed the title to Domes shonky autos-Manta 400 kit has arrived 😁
  • dome changed the title to Domes shonky autos-4 weeks, 4 MOTs

Well, in a spectacular* twist of fate I have 4 of the fleet due an MOT in the next month or so. Stay tuned for thrills and excitement as I try and get these heaps through an MOT. Who needs Bake Off?

First contender-

MR2

Not due for a few weeks yet but the handbrake was pish, despite getting new cables last year for its MOT. I removed the rear calipers to wind the pistons back so I could reset the handbrake mechanism.

Sounds easy, right? No pics but it basically has one normal slider pin and one cast into the carrier. So you undo the one slider and try and rotate the caliper up but it doesn't go far enough due to the handbrake cable limiting how far it'll rotate. This means even changing pads is a fucking ballache. Eventually I got the piston wound back, reassembled and with a sequence involving a brake pedal dance and a 10mm spanner all performed whilst facing south and sacrificing a virgin(not an easy task to undertake in Fife) I now have something resembling a handbrake. Oh and I changed a sidelight bulb too. Go me

MOT Status-READY* Due Mid November. 

XJ6

This has sat for a while not being used and the MOT expired last week. All seems well with it (famous last words) so I treated it to a handbrake adjustment-this was an advisory last year.

That, amazingly, went well so buoyed by this I decided to have another crack at greasing the UJs on the rear driveshaft. I had tried before but hadn't been able to get any grease in. This time I removed the nipples to clean them out, reattached and the grease flowed in happily, squeezing the old grease out of the seals. A quick test drive and all else seems well. I remembered how bloody lovely it is to drive though.  We'll not talk about the exhaust condition though...

1820912221_Jagarch.thumb.jpg.4fce8d66d1434a5e12e628c120c1d27a.jpg1944858681_Jagnipple2.thumb.jpg.f6f8907ddcc57024e614fd471939b807.jpg

MOT Status-Booked in for Friday

 

Evoque MODRIN ALERT

Feel free to skip this one, yes its a modern and yes it's a hateful thing but my better half loves it and Land Rover dealers are hilariously bad.  Also, the repair you're about to see is definitely shite worthy.

I'd changed the pads and discs last year but not replaced the wear sensor. This had a tiny split in it so I zip tied it out of the way instead of refitting it. Fast forward to the last month or so and the pad warning light had been coming on intermittently. I checked Euro Car Parts who list two wear sensors, the one I thought needed wasn't in stock at my local one. Time for a proper* fix.

Ewok.thumb.jpg.33e0fc3c5e59a8ff54e36889d600d1b5.jpg

Wheel off and the wear sensor wire disappears in behind the arch liner. Note the excellent condition of the 5 year old "Range Rover"

817018594_Ewokarch.thumb.jpg.a6bc5a255e500bff7e401ba7bbeb4a08.jpg

 

Sensor off I chopped the wires, bared the two sensor wires and twisted them together. Because I'm a professional I then heat shrunk the end of it and plugged it back in, hiding it up behind the arch liner.

1016112049_Ewoksensor.thumb.jpg.2aa98d7d0f1ea8e98ad7318538cd9ea7.jpg

Result-warning off

 

MOT Status-Booked in next week

Range Rover-the real one

This is due at the end of November so i thought I'd better start now. 

Known issue-handbrake non existent on the drivers side due to the backing plate being fucked. 

Solution is a new backing plate but like BMWs of this era its a big job to change properly requiring the hub to be removed. Never fail, I had a plan

Take one shiny new backing plate

 

1067878403_Rangey1.thumb.jpg.5d6d806ac60f31a157bba41db5b333f2.jpg

Cut 2 small bits of steel and arrange like so

Rangey2.thumb.jpg.10e4f083a84469a7b01fee3e85fe51b6.jpg

Drill holes in the steel and the backing plate

IMG_20211009_171108.thumb.jpg.13ca9990e4e21b24d741e64651cb6416.jpg

Carefully and accurately mark a line down the centre of said plate

Rangey3.thumb.jpg.a894ba9b224399dbcb68cf5a5ca1ec72.jpg

Chop the fucker in half and behold!

Rangey4.thumb.jpg.7d4bd18beef8f3c3d993e888a6bfac1a.jpg

This should work, hopefully.... I've not swapped it over yet but I have new handbrake hardware to fit at the same time so will hopefully be able to tick that off the list soon.

I also had an issue with it needing 30s or so to warm in the mornings up before it would be drivable. I suspected a vacuum leak or a dirty throttle body so gave it a clean.

 

248976601_Rangeyintake.thumb.jpg.488f93450105f6102f29da4ccc451ef5.jpg

495223367_Rangeythrottle.thumb.jpg.c49036bc549e570ddd8f5e3aecd0d533.jpg

It wasn't too bad and it seemed to behave better on the next few startups. Annoyingly it's doing the same again now so I'll need to dig further. 

On the subject of the handbrake, when changing the rear discs and pads the retaining spring for the passenger side handbrake shoe was missing. I replaced this with one from the drivers side and though no more of it. Fast forward a month or so and I noticed a light rattle at low speeds. Expecting the worst i started poking around and guess what I found?

 1162360386_Rangeybrake.thumb.jpg.3e329b9425b7c0f80b5b615a63af1eeb.jpg

Yep, the spring and retaining pin must've dislodged themselves and made their way down to rattle around between the disc and the backing plate. Succesfullly removed i can resume wafting in silence.

MOT Status-Due End November-PRAY FOR ME

 

 

Jag nipple.jpg

Link to comment
Share on other sites

6 minutes ago, Split_Pin said:

Good luck chap, sure it will all be cost about a grand!

In all seriousness, good luck, I hate the fact all my cars have winter MOTs within about a day of each other..

Shorting out a brake wear sensor is just good preventative maintenance. Who the hell needs them?

Link to comment
Share on other sites

  • dome changed the title to Domes shonky autos-4 weeks, 4 MOTs First one done!

Evoque passed today, just leaves the MR2 and Rangey which still have slightly more than a month so I'll hold off and get them in where I can get the full 13 months/time to fix them.

Oh, and the Megane i bought yesterday will need an MOT once I get the clutch fixed.

And then there's Mazda 6 2.5 I've just bought as the Mantas engine donor. It just needs to make it to my mates unit where it'll be getting stripped.

Collection should happen soon, did I mention the suspension is fucked?

 

Link to comment
Share on other sites

  • dome changed the title to Domes shonky autos-4 weeks, 4 MOTs 2 down, 3 to go!
  • 2 weeks later...

MR2 got its MOT yesterday-thankfully it was a pass although the handbrake got an advisory, despite me giving it a going over.  Arse of a thing.

The exhaust did too due to a leak at the manifold where I expertly* welded it together when swapping the 2zz in.  I think we'll get that done properly over the winter, my home made system isn't the best.

The Manta has been got to a rolling state as it's off to get the bodywork sorted soon and the 400 kit fitted IMG_20211102_103045.thumb.jpg.14e8386f1d13c5f8a0624cb306338e2e.jpg

 

And while it's being entrusted to an expert I have it's new engine tucked up on my garage.

The Mazda6 gave up it's 2.5l 4 cylinder (Duratec) engine without much of a fight

IMG_20211031_122819.thumb.jpg.b69a8338e43ffb35b3966df395010dd2.jpg

IMG_20211031_122826.thumb.jpg.e38abd8ea60006a5c834ec8a4ca15bf4.jpg

This will get stripped down and rebuilt over the winter ready to install when the Manta comes back-the near identical 2 litre will go off with the Manta to allow mounts etc to be fabricated to fit it, once it's back I'll slot the bigger engine in and try and make it make some noise. 

Link to comment
Share on other sites

  • dome changed the title to Domes shonky autos-4 weeks, 4 MOTs 3 down. MR2 passed. Manta repairs start soon
  • 2 weeks later...

I finally got around to fixing the handbrake backing plate on the rear of the Range Rover.

My expertly* modified backing plate went on last night along with a new set of shoes.

Old, crusty backing plate

IMG_20211112_164344.thumb.jpg.7be030ae80dd33985f7562c983eb7ff8.jpg

New plate on and bolted back together

IMG_20211112_171209.thumb.jpg.cf61a28e358e56773a8c5f0187b4c8f3.jpg

And shoes fitted

IMG_20211113_094505.thumb.jpg.ca2a343544077b9f964868f2f7653149.jpg

Thankfully the handbrake seems to work, in this side at least! The other side I'll try and adjust up before changing the shoes, it was in decent condition when I looked.

A quick nose underneath shoes a couple of potential MOT issues but I might stick it in first before committing any time/money to fixing it. 

Link to comment
Share on other sites

  • dome changed the title to Domes shonky autos-Range Rover MOT day-PRAY4ME

So, final Rangey MOT prep happened at the weekend.

Adjusted handbrake up-the newly reassembled drivers side was stronger than the passenger side so I wanted to balance them out

Jetwash the worst of the oil leak off the underside of the engine. I still can't work out where it's coming from sadly, i really should change the other rocker gasket. 

Disable the central locking actuator on the rear door that will lock but won't always unlock.

Change a drop link with perished boots-at £10 for the drop link it wasn't worth messing around with replacing the boots.

i'd fell off my bike earlier in the week and knackered my shoulder so the angry grinder was employed to the drop link to make life easier.

IMG_20211121_115006.thumb.jpg.9f0e8afe1d97abdf691d4c3f501ed968.jpg

Other than that it drives fine, with the odd creak off the underside i can't quite find but i thought the tester might pick up on.

I stuck it in today and it's safe to say I was pretty nervous-it's a big bugger and the thought of trying to replace some of the suspension components gave me the fear. Anyway, results are in...

Screenshot_20211123-163428.thumb.jpg.25255986c2022574224e00a8363320d0.jpg

Yass! Happy with that.

I can now treat it to a new radiator(current one has a slight leak) At the same time I'll inspect the air con condenser-hopefully that'll have a hole in it to explain the system not holding pressure. That and a new door lock actuator will do for starters. 

Have a bonus pic of it looking at home in the countryside.

IMG_20211102_133125__01.thumb.jpg.ef8bde762c26ea80196c131b9a532cd8.jpg

Link to comment
Share on other sites

1 hour ago, dome said:

So, final Rangey MOT prep happened at the weekend.

Adjusted handbrake up-the newly reassembled drivers side was stronger than the passenger side so I wanted to balance them out

Jetwash the worst of the oil leak off the underside of the engine. I still can't work out where it's coming from sadly, i really should change the other rocker gasket. 

Disable the central locking actuator on the rear door that will lock but won't always unlock.

Change a drop link with perished boots-at £10 for the drop link it wasn't worth messing around with replacing the boots.

i'd fell off my bike earlier in the week and knackered my shoulder so the angry grinder was employed to the drop link to make life easier.

IMG_20211121_115006.thumb.jpg.9f0e8afe1d97abdf691d4c3f501ed968.jpg

Other than that it drives fine, with the odd creak off the underside i can't quite find but i thought the tester might pick up on.

I stuck it in today and it's safe to say I was pretty nervous-it's a big bugger and the thought of trying to replace some of the suspension components gave me the fear. Anyway, results are in...

Screenshot_20211123-163428.thumb.jpg.25255986c2022574224e00a8363320d0.jpg

Yass! Happy with that.

I can now treat it to a new radiator(current one has a slight leak) At the same time I'll inspect the air con condenser-hopefully that'll have a hole in it to explain the system not holding pressure. That and a new door lock actuator will do for starters. 

Have a bonus pic of it looking at home in the countryside.

IMG_20211102_133125__01.thumb.jpg.ef8bde762c26ea80196c131b9a532cd8.jpg

Congratulations on the pass. 

Has the suspension collapsed in celebration on the offside?

Either that or the grass is bit boggy... 😉

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Fumbler
      To mark the genesis of my fleet project thread I here present my new car: a 1997 Nissan Micra Shape-


      It really looks that good. There is a reason for this: its previous owner was an old lady who loved the thing so much so she made every effort to keep it in good shape. It originally came from Fleet in the GU postcode which suggests to me it was bought by the present dealer at auction, hence arriving down here in Kent. Before seeing the car I checked its MOT history and its only fails were thanks to broken stoplights, which shows me that it was very well cared for. I suppose an example of this was that on the last MOT, an advisory was a corroded rear silencer. The silencer on the car when I saw it was new. Methinks the lady wanted to keep it as good as possible. It was kept in a garage and so all the bumpers and black trim are very black and the tyres are in very good condition. Spare never used! Also included a free Dettol first aid kit from 1997.
      This car has 15000 genuine miles on the clock. We clocked over 15000 during the test drive! The lady owner really only trundled around her village in it and the MOT shows that it only did some meagre miles between tests. This, of course, came at a price. We saw a cherry red Micra from 2002 at the same dealer. Paint was shoddy and when they washed it the boot had massive sections of bare metal and it wasn't very happy. This car, however, is in fabulous condition and there was no contest between the two cars- it really is that good, inside and out. Immaculate interior, driver's airbag, cassette player... all there and all functioning (apart from cassette thanks to new battery and failed display). This meant that I bought it for £1600, £100 over what was my uppermost limit, but I knew I wouldn't see another like this that was in as good shape for a fair while. It was priced very ambitiously, at £1990, so I'm content in the fact I managed to slash a few hundred off the price. There wasn't that much paperwork though. All the dealership received was the logbook with 3 service stamps from 1998, 1999 and 2000, the radio key pass, a National Trust sticker, and the original paperwork holder. I suspect the old lady died and had her car auctioned, and the massive file of paperwork is now someone's egg carton, along will everything else she owned.

      As always, this car isn't exactly in showroom condition. While the inside is great and the floor is solid, and the underseal is in great shape, the not undersealed parts need a small looking at. Mainly the rear of the driver's side sill. It's really the only bubbling on the car. I suspect a well aimed stonechip managed to fester over the wintery salted roads, making it rust even more. It's around the size of a 5p piece, and will give me the opportunity to spray the insides of the sill with some chain oil to prevent any further corrosion. Behind the fuel tank there are a few rusty joints- places where the spraygun cannot get paint onto- which some Vactan and Dynax should put to rights. Alternator belt looks original because of the cracking and Nissan badges and will need doing soon as well as the front plate. As much as I like the 90's font and original dealer surround, the dishevelled R and general water ingress is a persistant MOT advisory. It could be the MOT station being strict (and most likely is considering there's a Saxo down the road with far worse blackening), however for the sake of peace of mind and all that, I'll get a new one made. The rear has already been replaced indicating this has happened before.
      All in all, I think this is a nice plucky motor. I'll have it by the end of the week; just got to sort out tax, insurance, and it's going to have an MOT. As part of the deal it's getting the MOT and an oil and filter change which will be something ticked off the list. It has some love scratches and chips here and there, but it drives well, is stiff and controllable, and should make out to be a nice summer project!
    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By Tommyboy12
      What do you get after 16 hours and 800 miles of driving on a Sunday to collect two cars? Well @sharley17194 picks up a 1997 Citreon AX from the depths of the Lakes on the North West coast past Keswick. However, we actually started the day by driving to just near Cromer on the East coast to pick up this!
      An Austin Montego poverty spec estate with a 1.3L A-series engine! Yes you did read that bit right! Yes I know the DVLA lists the model as 1.6... Yes its correctly registered as 1.3L. No I dont know if its a factory 1.3L! 😂
      My favourite part of all this??? (Apart from the doom blue colour and the absolutely terrible interior!) 281,000 miles on the clock!
      Collection went really well and the below posts follows my initial assessment of what is quite frankly the best car I have ever purchased.



    • By Peter C
      Woke up this morning, had a little time before I had to leave the house for work, had a quick look at what’s new for sale on Retro Rides and saw an ad for a W124 200E manual, located 15 miles from home. I had no intention of buying a car today but I had to have it! I called the seller and arranged a viewing.
       
      Faults:
       
      2 x rusty front wings (TADTS)
      1 x rusty rear arch
      Needs a polish
      Tracking is out because new track rod end was fitted for MoT
      Engine has oil leak/s
       
      Good points:
       
      It’s a W124 200E!
      5 speed manual transmission
      New clutch
      Brand new MoT
      Superb MoT history
      4 x as new Continental tyres
      Last owner for 15 years, her husband before that for 4 years
      Very tidy MB-Tex interior
      Drives well
      All electrics work
       
      The dealer kindly delivered the car to my house but I managed a pez station shot on route:
       

       
      Plans:
       
      Remove front wings, cut away rust and apply plenty of wob.
      In-situ similar repair for rear arch
      Clean and polish
      Service engine
      Adjust tracking
      Leave patina and enjoy the car as it is
       
      I will update this thread once progress is made.
       

       

       

       

       

       

       

       

       

       
      Hopefully these two will become good friends.
       

    • By rickvw72
      Hi all, I’m going to try to keep this updated as a diary of work done on my old Fourtrak. 
      I bought this a few years ago but have only recently got going on it properly, with several other projects on the go, times been scarce.
      Ill start with the main job, the rear crossmember. When I bought the truck this tube had snapped on the drivers side. This ruptured the brake pipes, and ruined all the already tired suspension bushes.
      So, out with the crossmember...
      The original is round tube, the new 3mm wall box section, it actually holds the anti tramp bars. 
      Yes the Fourtrak has a 5 linked rear suspension, and an LSD. Because race car!
      I didn’t take many pics at this time, so I’m trying to improve this and maybe a thread will motivate me to document it. 
       



×
×
  • Create New...