Jump to content
dome

Domes shonky autos-Kangoo 182 exhaust fabrication begins

Recommended Posts

It all started with a message from a mate last week. Want a free car? A friend of his was needing rid.  


 


You can guess what my answer was.


 


I was sent this photo and told it had early stages of head gasket failure.


 


post-7629-0-44606600-1463604868.jpg


 


At least I new this one was broken. Whether or not it would make it home or not was a different matter...


 


Fast forward to tonight. Supplies collected and off we went.


 


post-7629-0-80431300-1463604916.jpg


 


Transport of choice. My mate is a shiter, he just doesn't know it yet...


 


On to the beast in question.


 


post-7629-0-19913400-1463604906.jpg


 


A 1.8 (it would be wouldn't it?) Freelander Serengeti. Phwoooar.


 


Initial thoughts under the bonnet-no obvious signs of being fucked about with, however no coolant in the expansion bottle and the dipstick was dry. No signs of Mayo anywhere.


 


Topped up fluids and fired it up. It was a bit tappy which is to be expected with no oil but quietened down. Let it warm up, bled it a bit and added some K Seal. I had a 25 mile drive home so better safe than sorry. I also left the expansion cap off and set the heater to max and off we set. Brakes were stuck on but soon freed off.


 


It only bloody made it! I babied it, not taking it above 3000rpm but when I got home it hadn't used any coolant. Gauge stayed bang in the middle and the heater was blowing red hot all the way.


 


I put the expansion cap on and let it run for a bit and it behaved itself. 


 


Back home. Apologies for the pics, it was getting dark. Probably for the best.


 


post-7629-0-56422500-1463604876.jpg


 


post-7629-0-41867100-1463604885.jpg


 


post-7629-0-18514700-1463604895.jpg


 


It's a bit rough, stinks of fags and only one electric window works. It's had the prop disconnected so is 2wd. It drives OK, think there may be an engine mount gone and there something knocking front end wise. But it was free...


 


Plans? Clean it and work out what's wrong with the engine. The boy I got it from reckoned it had had the modified head gasket done before he got it, there are no receipts though...


 


Then smoke about for a bit and flog it. Probably to buy something equally broken. I don't get out much.


post-7629-0-44606600-1463604868_thumb.jpg

post-7629-0-56422500-1463604876_thumb.jpg

post-7629-0-41867100-1463604885_thumb.jpg

post-7629-0-18514700-1463604895_thumb.jpg

post-7629-0-19913400-1463604906_thumb.jpg

post-7629-0-80431300-1463604916_thumb.jpg

Share this post


Link to post
Share on other sites

Well, so confident* was I in my new steed that I decided to brave the commute in it today-also becauee it's only insured til tonight and it gives me a chance to put some more miles on it and hoover it/check tyre pressures etc. I gave it a quick wash and it came up not too bad. I even refitted the expansion cap after checking the coolant-no loss in the 25 miles last night. Quick wash this morning as it was manky and here's the passenger side for the doubters ;)

post-7629-0-98866500-1463650996_thumb.jpg

 

 

Share this post


Link to post
Share on other sites

Well, so confident* was I in my new steed that I decided to brave the commute in it today-also becauee it's only insured til tonight and it gives me a chance to put some more miles on it and hoover it/check tyre pressures etc. I gave it a quick wash and it came up not too bad. I even refitted the expansion cap after checking the coolant-no loss in the 25 miles last night. Quick wash this morning as it was manky and here's the passenger side for the doubters ;)

DSC_0045.JPG

Dude, how the mighty have fallen.. softroader ftl:(

Share this post


Link to post
Share on other sites

Result, of sort. Refitting the expansion cap caused a slight drop in the level. A quick prod around at lunchtime revealed a leak from the inlet manifold gasket. New gasket ordered, an investment of £5. This is getting expensive...

Share this post


Link to post
Share on other sites
Guest Hooli

When you say the modified head gasket has been fitted, which one? there were a lot of revisions. I think the final one included a new stiffer ladder which fits in the sump for the head bolts to lock into.

Share this post


Link to post
Share on other sites

When you say the modified head gasket has been fitted, which one? there were a lot of revisions. I think the final one included a new stiffer ladder which fits in the sump for the head bolts to lock into.

 

I have no idea and no bills or history for the car so your guess is as good as mine...

Share this post


Link to post
Share on other sites

Started trying to get the stink of fags out of this thing. Knackered drivers side regulator and a chain smoker=filth.

 

 

It'll need done again. And again. Still stinks inside. Any tips for getting rid of the smell of fags?

 

Will try and get the inlet manifold gasket changed this weekend and give it a coolant flush and proper bleed if I get the chance, the Locost is the priority though if I get the head back for it...

Share this post


Link to post
Share on other sites

Get the front seats out and have a good hoover underneath. Headlining takes a lot of stink too.

 

I've found steam cleaners to be pretty effective. Just watch out / becareful on stuff like headliners.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By mat_the_cat
      Thought I should probably start a thread, given that a few people have suggested it. For my sins, my first car was a 1985 Hyundai Stellar. Bought back in 1997, when the sun still shone, I had more hair, and the world was generally a better place.
       
      This may be the earliest photo I have, I think from 1998:
       

       
      Anyway, I drove everywhere in it, and clocked up over 100k miles before I was given an Alfa Romeo 75. So I took the Stellar off the road for some much needed TLC. Made some progress on it - Rebuilt all the suspension, fitted a rebuilt Cortina* rear axle, Princess 4 pot front calipers and Capri vented discs etc - before a couple of house moves and renovations put it on the back burner.
       
      * before anyone says they are identical underneath, there are some differences. I fitted a replacement axle fairly early on in my ownership, only to fit that not only was the propshaft flange the wrong size, the UJ was totally different so I couldn't even fit a new yoke. Finding a company on the day before New Year's Eve who could cut off the end, weld a new UJ on and balance it wasn't too easy, especially one that was accessible by push bike!
       
      Anyway, late last year I found some renewed motivation, and have been working on it when time and money permit. Here is what it looked like in October:
       
       
      OMG barn find?

       
      Front suspension OK at first glance...
       

       
      ...but it has turned out the calipers had seized (so are away being rebuilt) and all the (brand new) ball joint boots had perished:

       
       
      Quite a bit of welding is needed too, but I had a setback just before Christmas when we were burgled and my welder stolen
       

       
      Crusty roof rail

       
      I've cleared some of the crap away from it now (it's not stored at mine - I'd love to own somewhere that big!) so might be able to get more photos. Currently working on the rear brakes, and disappointed to find that the shotblasted rear axle is now starting to rust after two coats of POR15 and 7 years storage under cover...
       

    • By BoggyMires
      Now, after thinking long and hard I have decided to try and part with this thing. The Great* BMW 635CSi. I bought this car from some dark shady place in Hackney and everything told me to walk away but in true shitter style I handed over the cash and drove it home. That was about 6 years ago.
       
      The plan was for it to be a rolling project but behind the scenes it was far worse than it looked and the bridge was looming. I took some weeks off work and tore it to pieces after taking it to fail an MOT. This showed me what I needed to do to get it legal after about 20 years of fudging it's way through life on bent tickets.
       
      Work done and it was used pretty much daily but it was a ticking time bomb waiting for all those 1980's parts to expire. Most of them did and were replaced accordingly. It's broke down twice. Once was a loose earth to the battery which was probably my fault and was so obvious that no one found it and the second time the main relay gave out.
       
      This car was my pride and joy and nothing would keep it from moving.
       

       
      ^ In it's prime*
       
      It's got plenty of character. It has a mind boggling electrical problem to do with the interior electrics which when I bought it involved having to remove the interior fuse under the bonnet to shut the engine down, and likewise the opposite to start it... not handy when refulling so I bunged a switch inside. It's now a safety feature.
      It's got a little knock when selecting reverse, it's always done it which tells me it's working.
       
      The bonnet, I removed no less than 12 coats of paint as it was chipping like a china plate. It is now in grey epoxy but the air flow meter blowing up dented it a little bit. Thanks.
       
      No BMW alarm anymore. The previous owner had this removed as it was thought to be causing the starting issues. The BMW wiring expert* consequently buggered up the cars electrics resulting in the above.
       
      ABS is disconnected as it was working at random. Never used ABS, don't know what it's for so it's left disconnected
       
      Heater valve has always been knackered. Blows fast hot only so that's never been looked at as it is considered to be working.
       
      I can live with these problems but then it developed more sinister issues:
       
      1) The rear half shaft undone itself but not completely
      2) the boot lock failed to work and had to be drilled out
      3) ignition issues resulting in 3 distributor caps.
      4) Air flow meter exploded one fine morning resulting in a total Motronic system check and overhaul where needed.
      5) The starter motor stopped starting the motor which was an absolute A hole to change.
      6) The most recent, the brakes all lock on when the engine gets hot.
      7) The fuel pressure regulator needs to be replaced. The car runs great on it but it can be improved. It causes a minor on/ off surge on fast straights in the summer.
       
      Problems I've caused.
       
      1) The ride height is too low
       
      Due to a complete career shift I had to give up my unit which was where miracles took place and weekly inspections and repairs could be done. The car was pressed into daily service, 100 miles a day for a few months or so until the brake problem became apparent, on the A14, in heavy traffic. Terribly embarrassing. 
       
      My career is very demanding and since May last year this car has been sat. I have no time usually and I hate seeing the thing stuck outside and it hates me for leaving it there. I have managed to get some time to do bits and have started to replace stuff on the master cylinder, pressure sphere ect but I don't know if this is the cure... which will just give me the arsehole if it isn't. I have also detected that the bulkhead seals and possibly the windscreen is letting water by. I removed the carpets and hey presto... I have some welding to do.
       
      So what's the future for it? 
       
      I don't like it anymore... it's beaten me down and without my unit, working on it is hard work (I also own a Land rover...) I have come to realise after a year or so that I can't afford the time and aggro with it anymore and I think that it's best to move it on. BUT I DON'T WANT TO!
       
      So, I'm am continuing to repair the mysterious brake issue in a bid to fix it and I'm going to weld er up and continue to try seek some enjoyment out of it like the good old days but in the meantime it's like having an anchor around my neck so if it sells, it sells.
       
      The good bits...
       
      1) The car is fast. Hit that sport switch and boot it. Nothing falls off and you stay in the same lane. Gives plenty of modernz a run for their money. That engine will gowan and on, it's been serviced when it's been due with only the best oil and proper plugs, compression tested too. I put a pipercross in it but thought it was shit so reverted to the standard filter.
      2) Decent HT leads
      3) Auto box had some work years ago totaling £1500! What?
      4) Most (about 85%) of the bushes are polybushes. Trailing arms need doing although there is no play with the current rubbery ones.
      5) Most 'messed about and lashed up by previous owner' stuff has been changed out.
      6) Rear tyres (cooper) are recent but I'm not happy with their performance in the wet pulling away as they can smoke and lose it like fcuk. The car suits dunlop sports well but I kept getting irrepairable punctures which gets expensive. The fronts are sports but are worn. Spare is original rim and tyre (good luck using that).
      7) Leather is in good nik with no rips. Drivers bolster is worn obviously but tarts up ok.
      Underside is well alright. I have pictures of all the bits that I done to it.
      9) Body paint is totally and utterly fucked because patina (shit paint job, laquer peel and fading). Ideally needs some panel rust dealing with and a blow over. I like it as it is... Looks street Yo.
      10) Heaps of paperwork, receipts, MOT'S, plans of action and diag test results all in a lever arch binder. Can get pictures on file too.
       
      The bits it'll ideally need soon:
       
      1) New suspension. You'll get the hump with the lowness. Working on it sucks.
      2) The sills have only another couple of years in them at a push.
      3) Brake backing plates. I've repaired them. The backs are holding out ok but the fronts are gonna vanish
      4) doors seals, sunroof seal
      5) back light seals and chrome. It's all fucked and can't be fixed.
      6) I'm putting on new front brakes as they got fried
      7) Probably a power steering pump as it whines sometimes when cold
       
      To make it ACE:
       
      1) All of the above but decent parts are becoming an absolute joke to get hold of. Walloth are catering more for these now but the 635 has been largely left out of the club.
       
      Here are some pictures took today after pushing it out of hibernation...
       

       

       

       

       

       

       

       

       

       

       

       

       
      So there... I've been honest, buy it for £NOT FORCED STALE and put me out of my misery. However, as I do want to sell it don't want to sell it, as I fix the thing and get it back on the road, the price will reflect that and probably will end up not being for sale.
       
      Location: Cambs
    • By sutty2006
      Oooops I did it again......was a song produced two years after this automobile. I told myself ages ago that I’d thin the fleet down and cut down spending ...... it didn’t last long. If this new purchase is a worthy keeper then I may part with the 50 quid omega. But let’s not be hasty yet!
       
      transport steed of choice is my 05 discovery and a trailer, no pics yet as it’s still pitch black outside. 
      Poo count = 1
      Blood sugar level = 11.2
      distance to go = 88 miles
      setting off at 7, keep posted for updates. 
×
×
  • Create New...