sutty2006 Posted May 18, 2021 Share Posted May 18, 2021 You’re right about front springs, they are hateful things to change! I remember stripping a front axle on my bench, undoing the lower ball joint while I was stood behind the shed door at arms length. When it came free, the axle bounced off the table, something hit the door, something hit the roof, and something dribbled down my leg. 😂 Snake Charmer, Minimad5, CreepingJesus and 7 others 10 Link to comment Share on other sites More sharing options...
dome Posted May 18, 2021 Author Share Posted May 18, 2021 2 minutes ago, sutty2006 said: You’re right about front springs, they are hateful things to change! I remember stripping a front axle on my bench, undoing the lower ball joint while I was stood behind the shed door at arms length. When it came free, the axle bounced off the table, something hit the door, something hit the roof, and something dribbled down my leg. 😂 Hmm, I'll maybe relocate the subframe temporarily and undo the ball joint with the weight of the car on it. Either that or send the grinder in through the coils before I strip it down. Bit brutal but it'll be getting new suspension anyway. Link to comment Share on other sites More sharing options...
sutty2006 Posted May 18, 2021 Share Posted May 18, 2021 Best way to do it is have the weight of the car on it, but a trolly jack under the bottom arm, so you can lower it down in a “controlled” “less brown trouser” manner. dome 1 Link to comment Share on other sites More sharing options...
Fraz Posted May 18, 2021 Share Posted May 18, 2021 Less brown trouser? That doesn’t sound very cowboy motorsport at all. jaypee 1 Link to comment Share on other sites More sharing options...
Honey Badger Posted May 19, 2021 Share Posted May 19, 2021 Do you think you could shoehorn a 350z drive train into the manta, might be be more affordable than an S2000? CreepingJesus 1 Link to comment Share on other sites More sharing options...
dome Posted May 19, 2021 Author Share Posted May 19, 2021 33 minutes ago, Honey Badger said: Do you think you could shoehorn a 350z drive train into the manta, might be be more affordable than an S2000? I'm sure you could but I'm set on the idea of a Manta that looks like and sounds like the original 400 road/rally car, so that's big capacity high revving 4 banger. I think waiting til the end of the summer and sourcing a 2006 on (NC) 2.0 MX-5 is the way to go. It's the same as a Ford Duratec so has good aftermarket support. Further down the line I can upgrade it to a 2.5 for most rortyness mk2_craig 1 Link to comment Share on other sites More sharing options...
dome Posted May 20, 2021 Author Share Posted May 20, 2021 A wee bit more progress happened yesterday. Firstly, I removed the trim from the windscreen seals to store them. The screens will come out at some point, the screens will go into storage and the trims will get painted black before they go back on. I had a visit from @320touring who graciously offered to help with getting the engine and subframe out from under the car and into the garage. Working on the driveway this was going to be pretty tight so an extra brain and set of hands was most helpful. I had the rear of the car as high as possible to aid getting the engine out. With the engine crane being used to lift the front of the car it was necessary to pull the engine and subframe out to the side, but there wasn't a lot of space to play with. Before lifting the shell with the crane here's where the engine sat. Look a the concentration on my face, and this is before it got exciting! Up she goes. It was now necessary to spin the subframe round 90 degrees to fit the engine through the gap in the wheelarch It was slightly* nerve-wracking as the shell was wobbling around a bit as we started to try and maneuverer the subframe out. Surely a professional like me would have made sure he disconnected everything? Oh. Yep, that's the fuel line... Once chopped things went more smoothly. Engine was out and moved to the side of the driveway. Whew! We lowered the shell back down onto axle stands at the front and refitted the rear wheels and dropped the back end back on to the ground. This meant we could push the car back a bit to allow us to wheel the subframe into the garage. Sorted! A quick clean up of all the crap underneath the car and it was lowered back down onto axle stands at the front. Neil was rewarded with a shot of my Range Rover on the way back from the chippy. Feel free to send him links to L322s for sale now... JMotor, Skizzer, jaypee and 22 others 25 Link to comment Share on other sites More sharing options...
320touring Posted May 20, 2021 Share Posted May 20, 2021 It was a hoot to get up and be able to help on this. Its an honest old tub and ideal for what @dome wants to do! I've never really paid much attention to them previously, but upon close inspection, they do have some very cool styling, and I think it'll look amazing when done! re the L322 I DONT WANT ONE (ok, maybe I do) dome, Fraz, loserone and 1 other 2 2 Link to comment Share on other sites More sharing options...
Skizzer Posted May 20, 2021 Share Posted May 20, 2021 Cracking job on this gents. dome 1 Link to comment Share on other sites More sharing options...
JMotor Posted May 20, 2021 Share Posted May 20, 2021 2 hours ago, dome said: Oh. Yep, that's the fuel line... What's the rated tensile strength on that...? All of it!! 😂 Top work gents. dome and sutty2006 1 1 Link to comment Share on other sites More sharing options...
sutty2006 Posted May 20, 2021 Share Posted May 20, 2021 Can you get a picture of the end of your clutch cable for me please? I’m not entirely sure how the end of the cable attaches to the pivot arm in the box..... thanks! Great work by the way! dome 1 Link to comment Share on other sites More sharing options...
dome Posted May 20, 2021 Author Share Posted May 20, 2021 9 minutes ago, sutty2006 said: Can you get a picture of the end of your clutch cable for me please? I’m not entirely sure how the end of the cable attaches to the pivot arm in the box..... thanks! Great work by the way! Does this help? Link to comment Share on other sites More sharing options...
sutty2006 Posted May 20, 2021 Share Posted May 20, 2021 33 minutes ago, dome said: Does this help? Yes and no! That’s what I was expecting, but the car has a different end on it (not threaded) and the new cable I bought years ago is identical 🤣 dome 1 Link to comment Share on other sites More sharing options...
jaypee Posted May 20, 2021 Share Posted May 20, 2021 Top work chaps! dome 1 Link to comment Share on other sites More sharing options...
Amishtat Posted May 21, 2021 Share Posted May 21, 2021 On 5/17/2021 at 6:27 PM, Barry Cade said: That pic makes my eyes water.. many many years ago,3 cars up in Tam Muirs yard, I was in the back seat of a Manta, nose broken and blood all over my Fido Dido T shirt.. That was before I learned when you are removing a steering wheel, leave the nut on a few threads.. Oooya. I watched the man across the road do the exact same thing on a Sierra about twenty years ago. I'd been having a fag out of my bedroom window so had a ringside seat as the debacle unfolded. The wheel took forever to loosen but when it did finally crack off he was pulling hard enough that I could see the vein in his neck, and he had one foot braced against the dash. Man, did the next bit all happen fast... Tickman, CreepingJesus, Barry Cade and 3 others 2 3 1 Link to comment Share on other sites More sharing options...
rickvw72 Posted May 22, 2021 Share Posted May 22, 2021 I’ve been hit in the head several times by steering wheels. Every time I think “leave the nut on next time” but I never do. I think I like the danger of it all, but like Russian roulette. “Can I get out the way fast enough?” Of course, the answers always no. Barry Cade, Shite Ron and dome 3 Link to comment Share on other sites More sharing options...
Barry Cade Posted May 26, 2021 Share Posted May 26, 2021 https://www.facebook.com/marketplace/item/1128565384222160/ 😯 dome and The Moog 2 Link to comment Share on other sites More sharing options...
dome Posted May 27, 2021 Author Share Posted May 27, 2021 8 hours ago, Barry Cade said: https://www.facebook.com/marketplace/item/1128565384222160/ 😯 That's got you written all over it. Get it bought! Barry Cade 1 Link to comment Share on other sites More sharing options...
Barry Cade Posted May 27, 2021 Share Posted May 27, 2021 1 hour ago, dome said: That's got you written all over it. Get it bought! Manta/cavalier off? 3 laps of Kirkcaldy prom. 22.00 hours. 1 year from today.. Suitably dressed. Shell suit and sambas Winner takes pinks 😆 CreepingJesus and dome 2 Link to comment Share on other sites More sharing options...
dome Posted May 27, 2021 Author Share Posted May 27, 2021 52 minutes ago, Barry Cade said: Manta/cavalier off? 3 laps of Kirkcaldy prom. 22.00 hours. 1 year from today.. Suitably dressed. Shell suit and sambas Winner takes pinks 😆 It's funny you mention the shell suit, have you seen the video for the new electric Manta A they made? There's some shell suits in there too... Funny, to me growing up it was all about the wide arched rally cars blaring through the forest, it was much later when I became aware of how they were viewed on the continent. They made 2 feature films in Germany basically taking the piss out of Mantas and Manta owners Manta Manta and Manta Der film, both shell suit heavy. I'm definitely getting a (fake) foxtail for the aerial though! sutty2006, Barry Cade, CreepingJesus and 1 other 3 1 Link to comment Share on other sites More sharing options...
juular Posted May 27, 2021 Share Posted May 27, 2021 Bloody hell you are cracking on with this. Nice work! Link to comment Share on other sites More sharing options...
sutty2006 Posted May 27, 2021 Share Posted May 27, 2021 If you find a foxtail, get me one too, been wanting one for years lol Barry Cade 1 Link to comment Share on other sites More sharing options...
dome Posted May 27, 2021 Author Share Posted May 27, 2021 56 minutes ago, juular said: Bloody hell you are cracking on with this. Nice work! Hardly, not touched it in over a week! Motivation has been a bit low with shite weather and work being a pain. I've also been chasing cheap mx5s as I'd like to get the engine choice settled once and for all. Your Volvo thread shows me what's possible though! Any tips for someone about to get into doing bodywork repairs outdoors? Link to comment Share on other sites More sharing options...
Barry Cade Posted May 27, 2021 Share Posted May 27, 2021 1 hour ago, dome said: It's funny you mention the shell suit, have you seen the video for the new electric Manta A they made? There's some shell suits in there too... Funny, to me growing up it was all about the wide arched rally cars blaring through the forest, it was much later when I became aware of how they were viewed on the continent. They made 2 feature films in Germany basically taking the piss out of Mantas and Manta owners Manta Manta and Manta Der film, both shell suit heavy. I'm definitely getting a (fake) foxtail for the aerial though! I spent a lot of time in Germany in the 80s, so was party to the Manta scene at the time. I remember being taken to see a BMW M1 in a 1.9 S/R , first time over 100 in a car, sideways whenever possible. Volker, you were a nutter, and have a lot to answer for... I remember him being particularly proud of the little splitters that sat on top of the wings. The next year I went over, he had a CX GTi.. but thats another story.. dome and Tickman 1 1 Link to comment Share on other sites More sharing options...
dome Posted June 1, 2021 Author Share Posted June 1, 2021 And we're off. Because yes, I need another car. This one has a purpose... Shite Ron, Dave_Q, sdkrc and 4 others 7 Link to comment Share on other sites More sharing options...
dome Posted June 1, 2021 Author Share Posted June 1, 2021 This picture should give you an idea of the current status of the vehicle being collected. Non running, naturally Mrcento, Shite Ron, The Moog and 9 others 12 Link to comment Share on other sites More sharing options...
dome Posted June 1, 2021 Author Share Posted June 1, 2021 Manta engine and box ahoy... sutty2006, Dick Longbridge, The Moog and 14 others 15 2 Link to comment Share on other sites More sharing options...
dome Posted June 1, 2021 Author Share Posted June 1, 2021 So, I'm buying this for the engine, yeah? VID_20210601_083045.mp4 Oh. wuvvum, juular, Dick Longbridge and 7 others 10 Link to comment Share on other sites More sharing options...
dome Posted June 1, 2021 Author Share Posted June 1, 2021 And we're on. Back to sunny Fife. Don't worry about the engine, I have a plan... Split_Pin, The Moog, djim and 3 others 6 Link to comment Share on other sites More sharing options...
Split_Pin Posted June 1, 2021 Share Posted June 1, 2021 I think the bottom end has a plan too! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now