Jump to content
strangeangel

Strangeangel's Citroënic Shenanigans (featuring the Autoshite BX, Ami Break and some bikes) 22/2 Aixam spares blag!

Recommended Posts

Ooh, that's got worse. It was always wet (Accumulator sphere/regulator) but never drippy like that.

 

It got worse... I came out this morning to find this:

 

DSC01282_zpslf4zfds6.jpg

 

Not good... time for investigation

 

DSC01283_zpssiw5xr0h.jpg

 

It didn't take long to discover this return pipe that had been joined where part of it had been replaced. The new pipe had split, due I think to the routing which made it bend right at the joint.

 

DSC01284_zpsnkoq5j4e.jpg

 

Now it looks like this:

 

DSC01285_zpsz3e2wdhk.jpg

 

How relieved am I to find it was something simple! Now all I have to do is clean up the toxic spill...

Share this post


Link to post
Share on other sites

Before the huge and disastrous leak above, the BX had always left a bit of the green stuff behind wherever it came to rest. Spurred on by Saturday's success I decided to see if I could deal with the bigger of the car's current two known leaks, at the OSF corner.

 

Once the wheel was off it didn't take even me long to spot the problem. These two

 

DSC01287_zpsk6nqxjgm.jpg

 

and these two

 

DSC01286_zpsnjoc40d9.jpg

 

need to become re-acquainted with one another. I think these have been snapped for a while, as the broken ends are full of crap.

 

HBOL doesn't appear to mention these, are they return pipes? What's going to be my best option for fixing this?

 

As ever, all help gratefully received!

Share this post


Link to post
Share on other sites

Yup. Strut return pipes. Low pressure, so you can just bodge a bit of copper pipe in. The two bits you're holding in your hand aren't meant to meet. They should still be one with those two other rubber bits right behind your hand. They only leak when the car drops. AEP in Scottishland can be good for replacements, though I do recall BXers saying that new ones weren't lasting very long. 

 

They're held in place with a really annoying metal clip that really requires a special set of pliers to fit properly. You can get away with keeping the metal support from that clip and using cable ties.

Share this post


Link to post
Share on other sites

The short version of my not-very-exciting and now disappeared update...

 

New exhaust rubbers and rear hanger welded back on means no more exhaust banging on the underneath when you switch on/off

 

IMG_1136_zps7mewy2xz.jpg

 

And here's a bonus shot of it helping out a less fortunate member of the fleet the other day:

 

IMG_20160729_092221_zpscsjqpp5e.jpg

Share this post


Link to post
Share on other sites

So the clutch failed yesterday :-(  The mechanic at our local trusted garage says it'll be £450 or so to replace it. He went on to suggest that's more than the car was worth, and did I want to consider getting something newer? He's a good chap, but he doesn't really get the old car thing beyond trailer queen classics; the Citroen just looks like some scrapyard escapee to him.

 

JUST FIX IT MAN.

Share this post


Link to post
Share on other sites

OK, he's just rung me to say that in addition to the clutch itself, the release fork is knackered. This is bad, because they are NLA and he can't find one.

 

So... the old girl needs your help. What we're after is the earlier type of release fork fitted to these cars. Apparently it was used on 405s, 309s and some C15 vans, and the part number is 211742. Our mechanic says he's tried all his usual internet sources but come up empty.

 

Any ideas??

Share this post


Link to post
Share on other sites

I think I missed this thread before, looks like a nice old bus. What engine/spec is it?

Good luck with clutch bits. I'd have thought if it was used on so many cars a s/h item should be findable...

 

It's a 19RD, though with a GTi interior IIRC. I had it from Cats (Can't remember cambelt details) and sold it to FPB7, who had it for quite a while by AS bike standards.

Share this post


Link to post
Share on other sites

Pivot arm doesn't look so bad but what is going on with the push rod?

This. That doesn't look at all right judging from other BE1 gearboxes that I've seen - I'd guess that the rod has been crudely lengthened as a bodge fix to get around the bent/damaged fork and now that you've fitted a new clutch and fork it's thrown everything out.

 

I couldn't find a picture of a BX one, but whilst it's not quite the same, this is how the BE1 linkage looks on a 205 - note the length of the rod and how everything is roughly in-line (my Google skills weren't up to scratch I'm afraid so the actual quadrant is cracked on this one, but you should get the idea)

 

FNtMhDpD.jpg

 

As a guess, if you removed the bits that have been crudely added, the rod will be roughly the right length for everything to sit in line and that would probably sort out the clutch pedal issue.

Share this post


Link to post
Share on other sites

I'd trim that push rod (or just chuck those nuts away) so that once it is in place the quadrant and fork are roughly parallel ......

 

They were probably put in to compensate for the lost travel caused by the failing old arm or pedal box

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By snagglepuss
      Didn't bother to do a collection thread as was a 30min drive so fairly boring.
       
      Yesterday I won this
       

       
      Which is effectively going to replace the civic and the xantia.
       

       
      Picked car from a bodywork guy in foreign lands (Yorkshire).
       
      First thoughts are that I think it has been sitting for a while but started straight up. Apart from service bits and potentially a cambelt everything seems to be good with it. Comes pre dented.
       
      Current is differently abled tax so that will need to be changed.
       
      Windscreen has small crack in passenger side.
       
      Runs really cold, this is after 30 miles of motorway

       
      Mind you it honks. Properly honks. Not as much as the focus I got from Shadow but not far off.
       

       
      List of jobs
       
      Oil change
      Spark plugs
      Air filter
      Thermostat
      Rear boot struts
      Front discs and pads
      Cam belt plus bits
      Ball joints
      Drop links
      Rear anti roll bar bushes
      Stereo code
      Windscreen crack
      Swimming pool emptied from boot wheel well
      Seal rear light clusters
       
      And a big does of cleaning
    • By sutty2006
      Oooops I did it again......was a song produced two years after this automobile. I told myself ages ago that I’d thin the fleet down and cut down spending ...... it didn’t last long. If this new purchase is a worthy keeper then I may part with the 50 quid omega. But let’s not be hasty yet!
       
      transport steed of choice is my 05 discovery and a trailer, no pics yet as it’s still pitch black outside. 
      Poo count = 1
      Blood sugar level = 11.2
      distance to go = 88 miles
      setting off at 7, keep posted for updates. 
    • By mat_the_cat
      Thought I should probably start a thread, given that a few people have suggested it. For my sins, my first car was a 1985 Hyundai Stellar. Bought back in 1997, when the sun still shone, I had more hair, and the world was generally a better place.
       
      This may be the earliest photo I have, I think from 1998:
       

       
      Anyway, I drove everywhere in it, and clocked up over 100k miles before I was given an Alfa Romeo 75. So I took the Stellar off the road for some much needed TLC. Made some progress on it - Rebuilt all the suspension, fitted a rebuilt Cortina* rear axle, Princess 4 pot front calipers and Capri vented discs etc - before a couple of house moves and renovations put it on the back burner.
       
      * before anyone says they are identical underneath, there are some differences. I fitted a replacement axle fairly early on in my ownership, only to fit that not only was the propshaft flange the wrong size, the UJ was totally different so I couldn't even fit a new yoke. Finding a company on the day before New Year's Eve who could cut off the end, weld a new UJ on and balance it wasn't too easy, especially one that was accessible by push bike!
       
      Anyway, late last year I found some renewed motivation, and have been working on it when time and money permit. Here is what it looked like in October:
       
       
      OMG barn find?

       
      Front suspension OK at first glance...
       

       
      ...but it has turned out the calipers had seized (so are away being rebuilt) and all the (brand new) ball joint boots had perished:

       
       
      Quite a bit of welding is needed too, but I had a setback just before Christmas when we were burgled and my welder stolen
       

       
      Crusty roof rail

       
      I've cleared some of the crap away from it now (it's not stored at mine - I'd love to own somewhere that big!) so might be able to get more photos. Currently working on the rear brakes, and disappointed to find that the shotblasted rear axle is now starting to rust after two coats of POR15 and 7 years storage under cover...
       

×
×
  • Create New...