Jump to content

Strangeangel's Citroënic Shenanigans (featuring the Autoshite BX, Ami Break and some bikes) 14/10 Shit don't fit.


Recommended Posts

I thought I'd start a thread for this as I'll probably end up asking all sorts of questions, given that this is my first 'proper' Citroën.

 

So... the ground clearance lever won't go all the way to the highest setting (all others work), which is bad 'cos the book says I need it to do that in order to check the LHM level. It feels like something's seized, so I don't want to force it. Any ideas for a plan of attack would be much appreciated.

 

Next up are the wheels. I now have a set of 205 pepperpots that have just gone off for powder coating & I need to get some tyres for them. The handbook says the car should have 165/70R14s on, the wheels came with 185/65R14 on. Any thoughts about what size I should get please? Cheers.

 

Link to post
Share on other sites

Height lever problem: My XM had the same problem with the height lever except it wouldn't go to the lowest setting. Someone suggested that the runner/guides under the car that the shaft runs through can become clogged up with shit and that a clean and lube would be the first step in trying to solve it.

 

RE the tyres: You could probably get away with the 185/65/14's but your speedo will under read by -1.59% plus whatever discrepancy they have from the factory. In other words 30mph = 29.52mph and 60mph = 59.04mph plus whatever the original discrepancy is. Not ideal but better than it reading slower than you are actually going.

Link to post
Share on other sites

You don't want to go too wide on the wheels or tyres, 5.5J best, you might get away with 6 if lucky. They foul on the rear arms, especially if the latter are leaning a bit. Seem to recall I just scraped by with 195/60/14s but 65s (or less) are better.

Link to post
Share on other sites

I thought I'd start a thread for this as I'll probably end up asking all sorts of questions, given that this is my first 'proper' Citroën.

 

So... the ground clearance lever won't go all the way to the highest setting (all others work), which is bad 'cos the book says I need it to do that in order to check the LHM level. It feels like something's seized, so I don't want to force it. Any ideas for a plan of attack would be much appreciated.

 

Next up are the wheels. I now have a set of 205 pepperpots that have just gone off for powder coating & I need to get some tyres for them. The handbook says the car should have 165/70R14s on, the wheels came with 185/65R14 on. Any thoughts about what size I should get please? Cheers.

The height lever always was stiff, just needed a good tug to get it locked in position.

Link to post
Share on other sites

You don't want to go too wide on the wheels or tyres, 5.5J best, you might get away with 6 if lucky. They foul on the rear arms, especially if the latter are leaning a bit. Seem to recall I just scraped by with 195/60/14s but 65s (or less) are better.

It was running on 6J with 195/60 14 and in spite of the rear arches being trimmed it was hard to get them on and off. Nothing seemed to rub while being driven though.

Link to post
Share on other sites

Check the linkage at the rear (it's all simple mechanical levers, rods and joints) and clean/grease. The handle in the car can take a bit of a pull to stick it in max height, but not to the point of excess. Is that clear as mud?

 

I think the GTis had 185/60/14s on 6" rims, when I ran them they were £200 bangers so used whatever they came with, but I seem to remember the sweetest combination was a car with 175/65s fitted.

 

Any pics?

Link to post
Share on other sites

BX's are ace - and well bought that man.

 

The HP set up is quite easy to live with once you get your head around it and even stripping the doesur (sic) valve isnt the end of the world - somewhere on the internet are some very informative pictures from @Vanny of this parish ( and the BX Project) who has stripped and refurbed one. agreed about having a quick look and lube underneath - but only with the car on axle stands - I really cant stress this enough as Ive had one crush a 2.5L tin of bitumen in seconds when it dropped ( resulting in a North West "Face of Christ" on the driveway for several months). 

 

Ive had 195's on one of mine and apart from needing to slightly modify the rear spats with a piece of wood all was well, but if the rear arm bearings are shagged they will rub.

Link to post
Share on other sites

Height corrector - It's okay, just needs a firm tug to get to the high position.

 

Wheels - It did run 165s when it was on steels. 195 you can get away with on the front (bought some in error but it was a shame not to use them) and 185s will go under the rear but will rub when on lowest setting. Rear arms lean a nib but don't affect the clearance.

 

DO NOT rely on the suspension to get under the car. The rear goes down pretty quickly (an hour or two) but the front stays up pretty well.

 

I know this machine pretty well.

Link to post
Share on other sites
  • 3 weeks later...
  • 2 weeks later...

Still haven't done anything about the LHM escape, largely because of doing-up-the-house type stuff, but also now that one of the 205s CV joints has shat itself the BX is officially Number One Car.

 

I did manage to discover why the throttle action was so heavy though, even with a new cable. The soundproofing under the dash had dropped down and was catching on the very top of the pedal mechanism - now fixed!

Link to post
Share on other sites

Still haven't done anything about the LHM escape, largely because of doing-up-the-house type stuff, but also now that one of the 205s CV joints has shat itself the BX is officially Number One Car.

 

I did manage to discover why the throttle action was so heavy though, even with a new cable. The soundproofing under the dash had dropped down and was catching on the very top of the pedal mechanism - now fixed!

 

Phew. That's good, because BX's can suffer from pedal box collapse. Clutch or accelerator can fail. 

Link to post
Share on other sites
  • strangeangel changed the title to Strangeangel's Citroënic Shenanigans (featuring the Autoshite BX, Ami Break and some bikes) 14/10 Shit don't fit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Peter C
      Woke up this morning, had a little time before I had to leave the house for work, had a quick look at what’s new for sale on Retro Rides and saw an ad for a W124 200E manual, located 15 miles from home. I had no intention of buying a car today but I had to have it! I called the seller and arranged a viewing.
       
      Faults:
       
      2 x rusty front wings (TADTS)
      1 x rusty rear arch
      Needs a polish
      Tracking is out because new track rod end was fitted for MoT
      Engine has oil leak/s
       
      Good points:
       
      It’s a W124 200E!
      5 speed manual transmission
      New clutch
      Brand new MoT
      Superb MoT history
      4 x as new Continental tyres
      Last owner for 15 years, her husband before that for 4 years
      Very tidy MB-Tex interior
      Drives well
      All electrics work
       
      The dealer kindly delivered the car to my house but I managed a pez station shot on route:
       

       
      Plans:
       
      Remove front wings, cut away rust and apply plenty of wob.
      In-situ similar repair for rear arch
      Clean and polish
      Service engine
      Adjust tracking
      Leave patina and enjoy the car as it is
       
      I will update this thread once progress is made.
       

       

       

       

       

       

       

       

       

       
      Hopefully these two will become good friends.
       

    • By PhilA
      Well, here we go again. I bit the bullet and bought me this.
       
       

       

       
       
      It's still up at the lot right now, there will be a miniature Collection Thread embedded in this thread when I go fetch it. Hopefully if the weather's good, that'll be this weekend.
       
      So, what is it?
       
      As the title suggests, it's a 1951 Pontiac Chieftain.
      It's got a flat-head straight eight hiding in the engine bay, 4.4 litres of it. It's bolted to a 4-speed Hydra-Matic Drive gearbox. No torque converter on this one, just a fluid coupling. 116 horses at a screaming 3700 RPM, 240lb/ft at 2000. It idles at 375 RPM. Redline just shy of 4k.
      Did I mention it's quite big? Sixteen foot eight from end to end and it seats six people in comfort. Every door has a quarter-light, too. Comfort is provided by properly sized tyres and (quite surprisingly for the age of it) double independent wishbone front suspension. Steering is via worm/wheel steering box so is moderately direct and the brakes are hydraulic drums all round. Modern and scientific!
       
      It's an honest example; looks to have had a "restoration" about 15-20 years back and the rust is coming through the seams and filler. The bottoms of the door skins have gone, the bottom of the A-pillars have gone (the front doors, on a single hinge a piece still open and close with one finger!) And it's got a couple holes and blebs in all the places you would expect.
      Not much electrical works. It needs to be completely rewired because someone has "converted" it to 12V. Thankfully it was originally negative ground so that's a good start. Gauges and such can be driven from a 6V bucking converter.
      Engine has had some work done on it- starts and runs nicely with very little greb coming out of the exhaust. It's got a few gaskets that need replacing and the tappets need some major adjustment, the gearbox engages gears correctly, the steering is okay but has a lot of slack in the center and the brakes work well, dont sink or feel spongy but need adjustment.
       
      More to come. I'll post up more pictures when I get it home.
       
       
      --Phil
    • By captain_70s
      Hullo,
       
      I'm a masochist from Leeds who is running two rusty, worn out Triumph Dolomites as my only transport in rural Aberdeenshire. You might recognise me from various other forums and Facebook groups. Realistically I need to buy a modern car of some sort, but instead I find myself looking at £300 Citroen BXs and Triumph Acclaims on Gumtree and thinking "yeah, that'd fit right in with the rest of the broken cars I can't afford".
       
      On to the cars, the main attraction being my 1976 1850HL "50 Shades of Yellow" that I bought for £850 and is currently my daily driver, here is a picture of it before I sanded off some surface rust and sprayed it badly in the wrong shade of yellow with rattle cans:
       

       
      Within a month of purchase I managed to plant it in to a steel fence backwards after a botched gear change on a wet roundabout and ruined the N/S rear wing, although judging by the other dent that's packed with filler it looks like somebody had already done the same. I also managed to destroy a halfshaft and one of my Sprint alloys (good for an extra 15hp) in the incident, so now it's sitting on it's original steelies but painted black (good for an extra 5hp).
       
      It's only broken down on me twice. once with some sort of fuel delivery related problem which may or may not have been an empty fuel tank and once when the thermostat jammed shut and it overheated and blew out some O-rings for the cooling system. It has recently developed a taste for coolant and oil which is rather annoying, although it's done 89,300 miles which is about 80,000 more miles than BL engineering is designed to last, I'm keeping my eye on eBay for replacement engines... 
      I tried to keep ahead of the rust a bit by rubbing down the arches and re-painting them, but apparently rattle can paint isn't great when you are spraying it at -5C, it also highlighted how although my car might have been Inca Yellow in 1976 it's now more of a "cat piss" sort of shade. So I ended up with the wrong shade of yellow which has rust coming back through after 5 weeks. Did I mention I'm incompetent?
       
      The other car is the first "classic" car I bought, so I can't bear to sell it. It's a '77 Dolomite 1300 and it cost £1400 (about £400 too much) and has been nothing but a pain in the arse:
       

       
      It looks much prettier (from 100 yards) but that's most due to the darker paintwork hiding the rust. It lives a mollycoddled life in my garage, where it somehow still manages to rust, and is utterly rubbish. 0-60 is measured on a calendar, top speed is 80ish but at that point it uses more oil than petrol, it rarely ventures over 50mph and if you encounter an incline of any sort you can kiss that sort of speed goodbye, along with about £20 of 20W50 as it vanishes out of the exhaust in the form of blue smoke.
       
      One of the PO's had clearly never heard of the term "oil change" so it developed into brown sludge that coated everything internally with the next owner(s) blissfully pouring fresh oil on top of it. This lasted until about 600 miles into my ownership when there was muffled "pop" from the engine bay and the car became a 3-cylinder. The cause was catastrophic wear to the top end causing a rocker arm to snap:
       

       
      As this was my first classic car I'd assumed it was supposed to sound like the engine was full of marbles, it wasn't.
       
      I put the engine back together with second hand bits declared it utterly fucked and promptly did another 5000 miles with it. After about 3500 of those miles the oil burning started, valve seals have gone so it's been relegated to my parent's garage as a backup car and something to take to local car shows as the 1850 is now embarrassingly ugly. I'm keeping my eye on eBay for replacement engines (deja vu, anybody?) Oh, I also recently reversed it into a parked Ford Fiesta and royally fucked up the rear bumper, rear panel and bootlid. Did I mention I'm incompetent?
       
      There have been two other cars in my life. My first car, a 2008 Toyota Yaris 1.0 an it's replacement a 2012 Corsa 1.4T. I didn't really want either of them, but it's a long story involving my parents and poor life choices. Ask if you want to hear it!
       
      So that's a brief summary of my current shite. If you want more pictures or details of anything do say as I've got photos of almost everything I'd done with the cars.
    • By sickboy
      Since my life has followed a nearly unrelenting course in project, “good-intentions”, “nice ideas” and general chod accumulation ever since I was about 14, I’ve decided I’d concoct all my projects into a haphazard fleet diary, for your amusement and viewing pleasure. My reports are likely to be sporadic, as and when I find time. 
      Coverage predominately will flit around my current stable, but I'll show some past vehicular activity too.
      I'll go into each in turn in the coming days and weeks, but briefly for now my current fleet comprises:
       
      1959 Ford 100e. Bought as a rolling shell in 2015. Built it up myself with all-Ford bits: 2.0 Pinto, type 9, GP4 MK1/2 Escort goodies up front, Bilstein 2.8 Capri struts on coilovers, 105e axle out back, RS turbo Recaros. Looks rough as fuck but it's solid and sorted underneath. Some don't like it because it's old, noisy and smelly. I love because it's old, noisy and smelly. Want to build a fast-road head for this soon really, but skint. Hardly needs to be quicker anyway.
      A lot of work to build, about 3 years, but immense fun to drive. 100% never selling!!!
       

       

      1991 Saab 900 16v Turbo. Bought last Summer, suspiciously cheap with a hot running issue and a heap of paperwork. I did the head gasket and rebuilt the head with new exhaust valves, stem seals, thermostat etc over lockdown. Also fitted new calipers, discs, pads and hoses all round, and replaced the NSF inner wing/driveshaft tunnel back in February.  Embarrassing MOT last month reveals more weldage is needed elsewhere, so that’s next for it and shall be reported in the coming pages


       
       
      1995 Citroen AX Jive. 1.0 4 spd. Hilarious to drive, immensely French, ripe but not rotten, wearing something akin to a peeved expression. Needs a few odds and ends but otherwise a goer. Back-up car in case my existing daily shits itself or something. Anyone spare a boot latch actuating rod and gear knob?

       

       

       
      2005 Clio 182. As close to a daily as I get (cycle to work). Not really Autoshite, or even very “me” frankly, but I’m convinced these are the last proper French hot hatch and soon to be daft-money, so I finally snubbed two years of looking-not-looking at them on eBay and bought this the other week. I'm 27 so many could argue it's a "quarter life crisis". Newest and quickest car I’ve ever owned, so probably not the wisest first choice to exercise modern car ownership.
       

       
      But my current main project, sapping funds and time and social life in equal measure, is my 1963 Ford Falcon 2dr sedan, so I'll post up the progress to date of that in the coming days.
      or now, here's a seller's shot of when I bought it.......
       

    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
×
×
  • Create New...