Jump to content

Project Capri. Door mirrors pg.46.


danthecapriman
 Share

Recommended Posts

They later introduced a darker green on mk2's, possibly Brooklands green, v nice shade, but metallic blue is a v good choice, and keep the vinyl interior if it's tidy enough.

They did a great colour called Apollo Green but don't think that came out until the Mk3

Link to comment
Share on other sites

  • 2 weeks later...

Update time.

 

Nothing much really but the guys contacted me again yesterday, the Capri is now completely stripped bare. It's now a shell with wheels and that's it.

This has revealed a couple more grotty areas, which was expected given the age of the car. However, the suggestion was made wether or not I want to get the shell media blasted.

The cons to this are obviously the additional cost and a bit more time.

Pro's are that it will completely remove any rust, paint, filler etc etc. this means much less labour later by stripping and cleaning localised areas, all the rust and damage will get found and fixed as without the blasting there's always a danger something might get missed. It also means the end finish will be better since the new paint will be applied to good metalwork and not over the old paint or filler.

 

So, I've told them to continue with the media blasting and it's also going to be given a rust resistant epoxy primer coat afterwards. I think this will give a better result at the end and be worth the extra expense.

 

In other news, a box full of new parts arrived the other day. All mechanical parts, so that will all be dropped off with them as/when. There's another box to come from Germany in next few days, that's also mechanical parts and also some chrome and badges that I was missing.

Once it's all arrived I'll try to get a pic of the spare parts pile.

 

I think it's safe to say that this is now definitely beyond the point of no return now.

Link to comment
Share on other sites

In terms of labour costs saved and providing the best surface on which to paint, the cost of the media blasting is worth it.

I agree. It makes sense if I'm spending good money to get the bodywork and paint up to a good standard, why then leave old filler and paint behind and just put new over the old. It just wouldn't be the right thing to do.

 

I'm getting quite excited about this! I really can't wait to see it finished.

Link to comment
Share on other sites

  • 4 weeks later...

Just had another bill and a chat with the guys about project Capri.

The car is now down to absolutely nothing. It's fully stripped down and the shell is literally just that! A bare basic shell and pile of panels. It's now gone to the blasters to be cleaned back to bare metal.

I'm quietly shitting myself about this! On one hand it's going to be good to get it done and get rid of every trace of rust and filler but on the other hand I'm wondering what is actually going to come back. It's a 42 year old Ford and I'm sure there's going to be more rot uncovered.

They also said the rot in the lower corner of the windscreen surround is worse than first thought, once the glass came out most of the rusty metal in that small area fell out with it. Upon cutting into it to open the damaged area up there is rot starting to spread down the A post and scuttle panel. I'm not bothered though, I knew it was there and it always looks worse when you start poking at it.

 

I've been digging out all my parts ready for this too, it'll be nice to have them finally put to use and out of the house. The front wings have been up in the loft for years and were a right twat to get out.

Here's some pics of a small selection of the parts haul.

 

35459424082_4d75caa5f6_o.jpgIMG_0180 by Dan Clark, on Flickr

 

34786211324_a587022cdb_o.jpgIMG_0178 by Dan Clark, on Flickr

 

35459434242_40d3d7c126_o.jpgIMG_0177 by Dan Clark, on Flickr

New genuine Ford wings. One still has it Ford part number stickers and was supplied new to Currie Motors London, in Stamford Hill way back whenever.

 

35459426862_0c3980e430_o.jpgIMG_0179 by Dan Clark, on Flickr

Used bumpers with GT/Ghia over riders. These are straighter than the originals and will be re chromed before use.

 

34786198194_ffc1f3e787_o.jpgIMG_0181 by Dan Clark, on Flickr

Shiny badges, some are new unused Ford parts.

 

There's loads more stuff other than this lot, full set of new rubbers for the whole car, new carpets and headlining, etc etc.

Link to comment
Share on other sites

Capri wings in the loft... AS gold.

Best place for them, they are rocketing in value, a good mate of mine has a mk3 valance, genuine wings and a full genuine rear panel in his loft he mentioned selling them but doesn't really need the money so I told him to leave them up there for a few years,

 

Have you got a parts room in the house Dan? my mrs gets the idea of needed parts, this is my box room I use the loft as well lol

 

DSC_2191_zpsfcivasea.jpg

 

Parts and my overall are stored neater than this i was taking a picture of a few engine parts, yes there are mk3 capri wings in there lol

Link to comment
Share on other sites

I don't have a designated store room, my parts go wherever I can get them, shoved under beds, on top of wardrobes, in the shed, the loft... Everywhere.

My Mercury still has loads of bits and bobs in the boot, I mean trunk!

Trouble is, I don't keep them separate! I've got Capri bits mixed in with Ford big block V8 bits, with Granada mk2 bits. It's everywhere!

 

I have heard rumours that new press tools are being made by a German firm for both wings and front panels. If they do it will bring prices down to sensible range, last nos front panel I saw went for £700 of fleabay!

The two nos front wings cost me about £600 for the pair when I got them years ago. I expect that's not a bad price now for rare mk2 unused panels. It's about time someone started making them again, as long as they are good quality.

Link to comment
Share on other sites

  • 3 weeks later...

Alright, she's now back from media blasting! No more Roman bronze.

 

I popped in this afternoon to see what came back from the blasters, and it's looking good!

Yes, there's more rot in places but overall I'm very pleased with how it looks now all the old paint and filler are gone.

Overall it's a very straight car, most of the bodyshell is in excellent condition, the chassis is like new, most of the floor is good, the engine bay/inner wings/original strut tops are excellent. The roof is perfect inspite of a small blister appearing but that hasn't left any marks or traces behind. Bonnet again is perfect.

 

But, the doors need their bottom corners replacing, the drivers side is worse than the other. Front wings are scrap (I knew that though), front valance needs some help! There's various small blebs of rust in various places that will get done, the lower screen surround/scuttle panel in both bottom corners had rusted through and so has the inner panel beneath it which explains why the floors were getting wet! The A post and inner sill area in both footwells is terrible! It's been plated repeatedly to varying standards and is unfortunately going to need a lot of work to put right. This is by far the worst place on the whole car. Probably needing the entire panel here to be replaced.

Both headlight bowls are pretty frilly on their outer edges too.

The rear end of the car is pretty good. Very little rot at all. Even the spring hangers are perfect. The only holed place is a couple of bits in the spare wheel well.

Both rear arches are solid, but whichever bell end changed them years ago has cut away the original, cut out the inner wheel well/outer arch joint and spot welded new arches (lap jointed!) in place then filled the joint. Really poor job sadly but this will get sorted properly this time.

 

35588019066_1b0cdee67b_o.jpgIMG_0194 by Dan Clark, on Flickr

 

35497011291_10b87c89d7_o.jpgIMG_0193 by Dan Clark, on Flickr

 

35240623950_549c3a4259_o.jpgIMG_0191 by Dan Clark, on Flickr

 

35240628190_b986f4f60c_o.jpgIMG_0192 by Dan Clark, on Flickr

This, and the same on the other side are by far the worst part of the car.

These bits are supposed to be a strong place on the car. As they are, full of rot, it would have just folded up in an accident!

Makes you wonder. Almost all of this was hidden beneath filler, seam sealer and underseal/paint. I knew it was rusty but had no idea how bad things actually were.

 

Overall I'm pleased with it still. The guys doing the work did say it is about at the point where patching up and making do wasn't going to work much longer and it is the right time to sort it properly, which I agree with totally.

 

Believe it or not someone at work said I was mad spending this money on a 1.6L and making it back into a factory spec 1.6L! But fuck it! Why not. Now I've seen it in bare metal I'm intent on having it become the best 1.6L left!

Link to comment
Share on other sites

Good on ya! So many are restored into V6s, Ghia or 'S' that the very few original more basic models will be few and far between, and far more interesting for it. Personally, I think it needs a BIG V8, Wolfrace slot mags, Richard Grant accessory catalogue throwing at it and a lurid paint scheme.... preferably with flames!

 

 

 

 

Not really :)

Link to comment
Share on other sites

Looking back at the pic on the first page, you wouldn't believe it's the same car.

 

35240800490_a06b55928b_o.jpgIMG_0024 by Dan Clark, on Flickr

 

 

35240623950_549c3a4259_o.jpgIMG_0191 by Dan Clark, on Flickr

 

 

"Lesser" models need saving and kept original because most people only think the big engined capri's or S clones are the way forward. Lesser models of any car always get my attention at shows

100% agree with this. Everyone remembers the biggest highest spec cars but the lesser models just disappear. I really can't wait to see this one painted and ready to go.

 

We were even discussing what to do with the axles and front beam. Under sealed? Matt black? Body colour? Nope, factory original satin black. We're all in agreement that the basic plan is to go back to as close as reasonably possible to how it was when new.

Link to comment
Share on other sites

Pics of the arches please.

I didn't take any of the arches.

It's not clever though. It's a new arch spot welded in a lap joint over where the old ones used to be, with the inner arch bowl cut away and not replaced. So there's nothing holding the inner bowl to the outer wing 1/4 panel.

It's literally been shoved over the hole, and held on with one tiny blob of mig weld every inch or so along it's length. Piss poor job.

 

It's good to strip cars down like this though, as the arches looked ok, it's only when you strip the old paint/filler away you realise what's actually under it all.

If I didn't get this blasting done, I could of had what I could see fixed, then the respray and all the hidden grot would still be underneath festering away.

Link to comment
Share on other sites

Are you tempted at this stage to paint it the original colour?

No not really. The original Stardust Silver is an ok colour but 'ok' isn't going to cut it here. I still think it would be a shame to do this extent of work and then paint it that colour.

For me, this is all about making this car exactly how I want it but keeping reasonably close to what it could have been from new.

It's always going to be a 1.6L (at least as long as I own it) and I'll be sticking closely to that spec, but I'm picking the colour (on the 1974 Capri 2 options list) that best suits me and how I think the car will look best. Hence the choice of Miami blue with black interior.

 

Not that it's their call, but the guys doing the work actually said, after I'd changed my mind to go blue, they thought it was a bit of a shame to do all this and then paint it a greyish silver colour. I strongly agree with them here tbh. I really think the blue will look gorgeous on this car, with no side trims or vinyl roof. It will look like a seventies Capri but not be over the top like if I painted it Daytona yellow for example.

 

As far as originality is concerned, how far do you go?

It's had lots of panel swaps over the years, the current interior while is the exact correct type isn't the cars original, it's had an aftermarket but period correct Radiomobile radio installed, I'll be installing electronic ignition etc etc.

What I'm getting at, is that the cars far from original anyway so nothing really is being lost by changing the colour. In fact if anything it's going to go back to being a lot closer to looking original than it has done since it was new.

If however it was a genuine original never messed with car some old dear had stored away for years then I could see the attraction to sticking rigidly to perfect originality. But this cars not that, it's been used and repaired (not always very well!) and it'll never be a concours car.

For me it's all about making it look good, be solid and safe, and being that little bit different and unusual these days by starting with a very low spec car and keeping it like that instead of making it into a high spec replica with a bigger engine and go faster bits. Of course there's nothing at all wrong with doing any of that but it's not what I want out of this car. Besides, when was the last time you saw an original looking Capri 1.6L? Especially such an early car as this one.

 

 

Edited to add, another bill just came through the letterbox. This one is expensive being for the blasting and etch priming afterwards.

I don't think the car will be worth what I'm paying for this afterwards but who cares!

Link to comment
Share on other sites

Nobody makes money restoring cars (apart from Mike Brewer) and unless you count "oldin aht yer 'and" as a hobby, then I don't think that's you.

 

Delighted to see the progress on this. Remember you are building this for you, not for the classic car market classifieds. Like when we buy new cars and pick sellable colours we might not even want - sod the next owner, it's your car!

Link to comment
Share on other sites

  • 2 months later...

A bit more to report with this.

 

I got hold of a good replacement dashboard.

 

35240612540_fca774c1c4_o.jpgIMG_0212 by Dan Clark, on Flickr

 

35240608630_b305cc2eef_o.jpgIMG_0213 by Dan Clark, on Flickr

 

This was off ebay. It's from a Ghia spec car, which unfortunately means it has the extra grab handle on the dash front passenger side. I'd have preferred a standard one but this was in really good nik and ive struggled to find a good one at all so it's a compromise I'll happily live with. The important thing is that it's not cracked or split and the speaker holes on the top are all perfect still.

The original dash is terrible, there's loads of splits on the top, one comes all the way down the front too and the speaker holes are completely broken off leaving a big hole instead, so that's fit for the bin only now.

 

Also might of scored a set of correct style steel wheels. The ones with the little black painted bits around the holes all Fords of the time seemed to have.

Originally this car had this type in 5x13 size. They were bent and rusty as hell so got binned years ago in favour of the laser 4 spoke alloys it's got now.

However, the new steels are the sports style ones, they look the same but are 5.5x13 instead so are a tad wider which I think will both look better and feel a bit better to drive too without making the steering too heavy feeling.

They'll be fully reconditioned before use and I've got the chrome centre caps already from the original wheels, which should polish up ok.

 

This means I might have a set of 5 laser 4 spokes with decent tyres if anyone's interested. I'll have to see once the new steels arrive first though, just incase!

 

I've had another bill recently too. Lots of welding! Not much to say about that really but it's all been on the inner sills and A post areas.

I've spoken to the guys too, apparently there will be a delay on the project as some of the new panels they're getting for this project have a lead time of a few months. Not much anyone can do about that sadly, but I don't care. If it takes extra time to get a really good result I'm fine with it.

Link to comment
Share on other sites

  • 2 weeks later...
  • danthecapriman changed the title to Project Capri. Door mirrors pg.46.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Similar Content

    • By Peter C
      I bought a lovely Mini Cooper S from @Sunny Jim which my wife and I collected yesterday. See here:
      The Cooper made the 250 mile 4.5 hour journey to Buckinghamshire (from North Wales!) under its own steam but all was not well under the bonnet. The fresh air vents were providing anything but fresh air, I was choking on oily fumes. I stopped on route and wiped a lot of oil from the rocker cover and gently kept going, keeping the engine revs below 3k.
      Before you read any further, I have absolutely no qualms about the car or the deal I made with @Sunny Jim I bought an 18 year old car with 120k, sold as seen, of course there will be problems! 
      I investigated further this morning. There was oil all over the front of the engine and on top of the exhaust manifold shield.


      I went to remove plug lead No 2 and it came off in two pieces, the metal connector has split from the cable.

      Next I removed the sparkplugs. Plugs 1 and 4 were a little moist but plugs 2 and 3 were sinking in engine oil.


      The rocker cover gasket and plug well seals were obviously knackered, a typical R50/53 fault. 
      To get the rocket cover off...

      All this had to be removed. It's by no means a difficult job but it was time consuming. There is a bit more space under the bonnet of my W123 & W124!

      I've bought a new set of leads £18 and I'm picking up the gasket set tomorrow morning (£40). Hopefully the whole lot will go back together without any issues.
      Look at this engine, it's hard to believe that it's done 120k miles in 18 years. Everything under the rocker cover looks mint!

      In other news, to replace a blown brake light bulb I had to remove the entire light unit. How stupid. Modern* cars ehh?

      The annoying rattle from the tailgate was silenced with a 4 inch length of insulation tape, wrapped around the lock catch.

      I do like a clean exhaust pipe. Or two. Out came the Brasso and I am pleased with the shine.

      And finally, I've noticed that the small lights in the front bumper flick on randomly. According to the experts on a Facebook group, the presence of LED bulbs is upsetting the system.

    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By Tommyboy12
      What do you get after 16 hours and 800 miles of driving on a Sunday to collect two cars? Well @sharley17194 picks up a 1997 Citreon AX from the depths of the Lakes on the North West coast past Keswick. However, we actually started the day by driving to just near Cromer on the East coast to pick up this!
      An Austin Montego poverty spec estate with a 1.3L A-series engine! Yes you did read that bit right! Yes I know the DVLA lists the model as 1.6... Yes its correctly registered as 1.3L. No I dont know if its a factory 1.3L! 😂
      My favourite part of all this??? (Apart from the doom blue colour and the absolutely terrible interior!) 281,000 miles on the clock!
      Collection went really well and the below posts follows my initial assessment of what is quite frankly the best car I have ever purchased.



    • By BorniteIdentity
      This week, for the first time ever, I felt old. I have sciatica which swaps from one side to the other, arthritis in one hand and what I think is the beginnings of IBS. On top of that it took me 2 weeks to remember a registration number that once would take me 2 seconds, and I forgot my parent's wedding anniversary.

      I'm only 32.

      Shit. No I'm not. I'm 33. I forgot that too. (Genuinely)

      So, it's about time I committed some of my tales to paper. Well, a shonky server... but that's the best you can do in 2016.

      First up, a list of the cars I've owned (as best as I can remember) in chronological order.

      Main Cars
      1985 VW Polo Formel E. C158 TRT. This was given to me even before I passed my test.

      1991 Rover Metro S. J801 TAC. Bought about 3 months after I passed my test as I was convinced the Polo was about to shit its gearbox.

      1987 Volvo 360 GLT. D899 CBJ ___ Managed three months in a Metro before the small car and smaller petrol tank became a bore.



      Ford Mondeo and Honda Civic Coupe by Bornite Identity, on Flickr
      1999 Ford Mondeo Zetec. V384 DBJ. Still the most I've ever spent on a car. It was 3 years old and cost, from memory, about £8,000. Just think of the Rover R8s you could buy with that now!

      1987 Volkswagen Golf GTI 8v by Bornite Identity, on Flickr
      1987 Volkswagen Golf GTI D79 CVV. I very nearly bought a MK1 Golf 1.1 but was persuaded, by my father amusingly, to buy this one from a different friend. From memory I gave about £500 for it, and sold it to some racers later that year for about £300. Amusingly, 16 year later I'd sell the Hartge wheels that came with the car for £530.

      1999 Toyota Avensis CDX by Bornite Identity, on Flickr
      1999 Toyota Avensis CDX. V781 GDP. By far the best car I've ever had. Bought in 2002 for £5300, it had previously been a company car at British Telecom. I ran it from 62,000 to 174,000 before it became surplus to requirements. A German chap bought it on ebay for about £500 and drove over to collect it. Hero.

      2001 Ford Mondeo Zetec by Bornite Identity, on Flickr
      2001 Ford Mondeo Zetec. Y821 EEB. I should have loved this car. I gave £500 for it in 2008 which was stupidly cheap by anybody's standards. It needed 4 tyres (which actually was nice to pick good ones for once) and a coil spring. Sadly, it was just bill after bill after bill. I sold it and promised to never own another Ford. I nearly succeeded.

      1998 Nissan Almera by Bornite Identity, on Flickr
      1998 Nissan Almera GX Auto. S58 NLO. My late Grandfather's car and, upon reflection, my first proper attempt at bangernomics. I bought it for £500 in 2008 from the estate and ran it for well over a year and 30,000 miles. It was also my first automatic which, whilst a bit dumb, did lock up into overdrive and give a good 36 mpg no matter how it was driven.

      2004 Ford Fiesta 1.25 LX and 2006 Ford Focus 2.0 Ghia by Bornite Identity, on Flickr
      2004 Ford Fiesta Zetec. AG53 BWL. My wife's car which I ran for a couple of years when I bought her a Focus as a wedding gift.

      2003 Rover 75 by Bornite Identity, on Flickr
      2003 Rover 75 Club SE. AX53 BFA. This is where my career as a serial car buyer really began. Ignoring all of the warning signs I decided to press a K Series into a daily 100 mile commute, which it did with aplomb. This wasn't actually the car I set out to buy, the one I'd agreed to buy OVERHEATED ON THE FORECOURT whilst I was doing the paperwork. Consequently I couldn't leave fast enough and bought a different car later that day.

      2004 Toyota Avensis T30-X by Bornite Identity, on Flickr
      2004 Toyota Avensis T3-X. KT53 DWZ. Sensible head back on, I decided to get back into something I trusted when my 3rd son was born. This was a lovely car, but not without its problems. The VVTi oil burning issues are well documented and do frequently occur. Ironically, this was less reliable than the Rover it replaced! Despite fearing the worst and 3 months off the road, the new owner has just MOTd it.

      1999 Toyota Avensis SR by Bornite Identity, on Flickr
      1999 Toyota Avensis SR. V263 GDP. Back into bangernomics territory again. The last MK1 Avensis I had was the best car I'd ever had, so I hoped to replicate it with another T22 Avensis. This one came up for sale in my favourite (and rare) colour with a numberplate sequential to my previous car - so it was meant to be. I still have this now, and tomorrow it will tick around to 185,000 miles having been bought by me at 100,500.

      Side Bitches

      1974 Morris Mini 1000 by Bornite Identity, on Flickr
      1974 Morris Mini 1000. GEL 517N. Well, I always wanted one - and was young, free, single and well off at the time (2003). A memorable trip to buy it when I called my new girlfriend by my ex girlfriend's name 20 miles into a 200 mile weekend away. She's never forgiven or forgotten but we're still friends. Oh - and married.

      1977 Ford Capri II GL by Bornite Identity, on Flickr
      1977 Ford Capri II 1600 GL. SMY 675R. I can't remember why I bought this, other than I thought it'd be amusing. It was bought from Norwich for £350 and was perfectly well behaved for the 8 months that I had it (other than a flasher unit expiring). I remember being shocked just how much the windscreen would ice up inside, and duly sold it in November to a guy who was going to drive it daily! It's still alive and now, apparently, black! (Update - it's now silver!!!)

      1989 Volvo 340 DL by Bornite Identity, on Flickr
      1989 Volvo 340 DL. G67 AVN. I bought this for £80. Unbelievable. It was utterly bloody perfect. I wanted to do a banger rally which is why the guy gave it to me so cheap. I'm still yet to do that rally, but no longer have the car. I sold it for about £300 to a family who were clearly down on their luck who, I hope, still have the car.

      1996 Toyota Granvia by Bornite Identity, on Flickr
      1996 Toyota Granvia. N775 JEV. My wife and I decided to increase our numbers further and, with our 4th son on the way, larger transport was required. We quickly realised you can either have 4 children and no apparel, or apparel and no children. After trying a very tired Mercedes Viano, the Granvia was found for 1/4 of the price and it's still here 2 years later. I can safely say that we'll never sell it - it really is another member of the family.

      1993 Mercedes 190e by Bornite Identity, on Flickr
      1993 Mercedes 190e. L795 COJ. I've admired these cars since I was a child. In fact, one of the very few toy cars I still have from my childhood is a Mercedes 190e. Regular readers of "Memoirs from the Hard Shoulder" will know what a PITA this car has been since day 1, but I get the feeling it's a keeper. We'll see!

      1983 Ford Sierra Base 1.6 by Bornite Identity, on Flickr
      1983 Ford Sierra Base. GVG 510Y. Not explicitly my car, but it should be documented here for reference. Oh - and the V5 is in my name. The story is online for all to read as to how five of us acquired what is believed to be the only remaining Ford Sierra Base. Make a brew and read it, it's a fantastic story.

      1982 Ford Sierra L by Bornite Identity, on Flickr
      1982 Ford Sierra L. LCR 503Y. I accidentally won this on ebay for £520. Upon reflection, I shouldn't have sold it - but short stop of saying I regret it. I could never get truly comfortable driving it and, in fairness, I could scratch my Sierra itch with the base if I wanted. Sold it at a stupid profit of £1250. It is believed to be the oldest remaining Ford Sierra in the UK.

      1979 Volvo 343 DL by Bornite Identity, on Flickr
      1979 Volvo 343 DL. DBY 466T As you'll see above, I'd had a 360GLT as a younger lad and fancied one of these earlier cars. The variomatic is, frankly, terrible but amusing. This car has just 8000 miles on the clock and inside was absolutely timewarp. Sadly, the huge bill for the Mercedes 190e cylinder head rebuild meant I had to sell this car shortly after acquiring it. Since then I've had a bit of money luck, and now realise I didn't need to sell it after all. Typical.

      I think that's it. My arthritis is playing up even more now. I've left out a few cars that were actually my wife's, but if I find pictures will add them in at a later date. I'll run this as an ongoing thread on cars and what's happening.

      Current SitRep:

      Purple Avensis: Just about to click over 185,000. Minor drama this week when an HT lead split but otherwise utterly fantastic, fantastically boring and boringly reliable.

      Granvia: Just done 1000 miles in a month around Norfolk, 6 up with suitcases. 31mpg achieved on the way up which is good for an old tub with a 3.0 Turbo Diesel on board. ODO displaying 175,000 which is a mix of miles and kilometers. Say 130,000 miles for argument's sake.

      Mercedes: Being a PITA. It's had the top end completely rebuilt after the chain came off. Now needs welding to pass another MOT and the gearbox bearings are on strike. It's about to go into the garage for winter until I can stomach it again. 151,000 miles on the clock.

      Sierra bASe: Still on sabbatical with AngryDicky who only took it bloody camping in cornwall! Legend.
    • By SiC
      Big thanks to Panhard65 for transporting this for me.


       
      Now unloaded and waiting for me to start work on it. First time I've seen it outside. I think Panhard65 thinks it's a bit of a turd but doesn't want to be nasty.

       
      Entertaining Mrs SiC friends today, so I need to put these away from kids hurting themselves. Going to live in the garden for a month undercover. If I can get the 1275 in there running, these will be sold on. If I can't, I'll see if I can get any of these in.

       
      For now, I have to earn some more goodwill credits with Mrs SiC.
×
×
  • Create New...