fordperv Posted November 24, 2017 Share Posted November 24, 2017 Looking forward to pics of this in primer danthecapriman and saaby 2 Link to comment Share on other sites More sharing options...
danthecapriman Posted November 24, 2017 Author Share Posted November 24, 2017 Looking forward to pics of this in primerRoll on Monday then.I've got the day off work, hopefully I won't feel like death by then though! Fucking cold. I've also got to mark exactly where I want my aerial hole drilling in the wing, so I'll do that while I'm there. I can't wait to see it either. Felly Magic 1 Link to comment Share on other sites More sharing options...
AndySnapper Posted November 25, 2017 Share Posted November 25, 2017 Roll on Monday then.I've got the day off work, hopefully I won't feel like death by then though! Fucking cold. I've also got to mark exactly where I want my aerial hole drilling in the wing, so I'll do that while I'm there. I can't wait to see it either. That will be a 'Man Cold' (according to my missus) I have one as well - nothing worse or more evil! The cold that is, not the missus Andy danthecapriman 1 Link to comment Share on other sites More sharing options...
The Reverend Bluejeans Posted November 25, 2017 Share Posted November 25, 2017 Acrylic plates are fine if they have the correct pre 2001 font AND the backing is sepia tinted to 'age' it. mk2_craig, danthecapriman and Shep Shepherd 3 Link to comment Share on other sites More sharing options...
Felly Magic Posted November 25, 2017 Share Posted November 25, 2017 Looking forward to more photos of this epic project, brings back memories of OWY197P, a dark green 1600L with BVR & cream interior, on white Wellers that was in our family when I was a nipper, that car spawned my love for Ford's affordable coupe danthecapriman 1 Link to comment Share on other sites More sharing options...
danthecapriman Posted November 27, 2017 Author Share Posted November 27, 2017 Alright you bunch of bum holes, enough of all this forum moaning! Check this shit out!! The Capri as it stands right now. IMG_0914 by Dan Clark, on Flickr IMG_0915 by Dan Clark, on Flickr IMG_0916 by Dan Clark, on Flickr IMG_0917 by Dan Clark, on Flickr IMG_0918 by Dan Clark, on Flickr IMG_0919 by Dan Clark, on Flickr IMG_0920 by Dan Clark, on Flickr It's a bit dusty as there was work going on nearby, but it's unbelievably flat and smoothe. It'll sit like that for a few more days to harden off fully. There's a few minor bits and bobs still to do but the next step will be to finish off seam sealing the shell then apply the undershield protective coating to the underside.They're getting a local guy who's a Ford dealer and perfectionist, who sold these cars new, to come have a look and show how a few things went on to get that factory applied look! It might seem over the top but we all want this looking spot on!Ironically, there's a very real chance this specialist would have been the guy who sold this very car when it was new! It's a local car and never left the area...Then it's paint time!! I have to say, I'm absolutely over the moon with this car now. The pics really don't do it justice, I walked in and was absolutely gob smacked when I saw it! It's gorgeous and it doesn't even have paint on it yet!I think the guy doing the work is incredibly proud of it too. He's got every right to be imho. It's nice to see the guys doing the job are as enthused as I am anyway. Next step for me is to see how the mechanical guy I'm using wants to go about getting the axles and wheels etc back onto it, this will make moving it around much easier so I'll get in touch with him over the next few days. I'm really not looking forward to shifting the engine though! It's got 'bad back' written all over it...I also require a set of tyres fitting, as these will be needed very soon too. It's going to be an expensive month! trigger, Carlosfandango, cort1977 and 34 others 37 Link to comment Share on other sites More sharing options...
Skizzer Posted November 27, 2017 Share Posted November 27, 2017 Absolutely chuffed to bits for you Dan, especially after all you’ve been through with it. That looks better nailed together than when Ford did it first time round. Can’t wait for the next stage! danthecapriman 1 Link to comment Share on other sites More sharing options...
trigger Posted November 27, 2017 Share Posted November 27, 2017 Absolutely over the moon for you mate! It's going to look amazing once finished danthecapriman 1 Link to comment Share on other sites More sharing options...
danthecapriman Posted November 27, 2017 Author Share Posted November 27, 2017 Absolutely chuffed to bits for you Dan, especially after all you’ve been through with it. That looks better nailed together than when Ford did it first time round. Can’t wait for the next stage!Cheers mate! I think your right on that, Ford would have done it quick and cheap to get it out the door but it's had many many hours put into it this time.It's also had a good deal of forward planning and future proofing built into it before it got to this point, so all being well it shouldn't be able to rot anywhere near as easy as would have. It's had no less than 5 coats of epoxy primer onto its bare steel outer surfaces beneath all the normal primer layers, so it's got extra layers but the epoxy stuff will prevent any moisture whatsoever getting to the steel beneath. Call me sad, but this cars days of being used as a car are well and truly behind it now. It's a garage queen and a toy for nice weather use only from now on. I might even break the habit of a lifetime and take it to a show or two! Who knows! mercrocker, Skizzer, Brodders and 3 others 6 Link to comment Share on other sites More sharing options...
adw1977 Posted November 27, 2017 Share Posted November 27, 2017 I might even break the habit of a lifetime and take it to a show or two! Who knows!After all the effort you have put in, it would be a shame to not show it off! eddyramrod and danthecapriman 2 Link to comment Share on other sites More sharing options...
junkyarddog Posted November 27, 2017 Share Posted November 27, 2017 That looks incredible Excited to see it in it's fresh gleaming coat of paint now. danthecapriman 1 Link to comment Share on other sites More sharing options...
oldcars Posted November 27, 2017 Share Posted November 27, 2017 Looks spot on, you must be happy with it. danthecapriman 1 Link to comment Share on other sites More sharing options...
panhard65 Posted November 27, 2017 Share Posted November 27, 2017 They have done a cracking job of that I hope you changed your mind about drilling a hole to fit an aerial. If it was me I would fit one of those stick on ones inside on the windscreen or not have a radio at all, but it is up to you. I am sure if they do drill it they would get it right first time but is it worth the risk. alf892 and danthecapriman 2 Link to comment Share on other sites More sharing options...
Noel Tidybeard Posted November 27, 2017 Share Posted November 27, 2017 the stupid thing is the grey of the primer really suits the car - fuck paint clear coat the primer! danthecapriman and Low Horatio gearbox 2 Link to comment Share on other sites More sharing options...
danthecapriman Posted November 27, 2017 Author Share Posted November 27, 2017 They have done a cracking job of that I hope you changed your mind about drilling a hole to fit an aerial. If it was me I would fit one of those stick on ones inside on the windscreen or not have a radio at all, but it is up to you. I am sure if they do drill it they would get it right first time but is it worth the risk.Ta!I've gone for the hole! The radio aerial is the Ford original, a nice little chrome jobbie! Suits it I think, and its original so I want to retain it.Well, I say original, but it's a Ford part that the cars had for most of its life. This car should be radio-less being the base spec but it's got a really old 'Radiomobile' set up which I do like! The dash blanking plate is missing anyway and I'm unlikely to find a replacement.The only change here has been the side of the car the aerial is fitted to.Oddly, before this started the aerial was fitted to the drivers side wing. It should be on the passenger side wing. No idea why or how that ended up happening though? Link to comment Share on other sites More sharing options...
vulgalour Posted November 27, 2017 Share Posted November 27, 2017 That looks very sharp. danthecapriman 1 Link to comment Share on other sites More sharing options...
danthecapriman Posted November 27, 2017 Author Share Posted November 27, 2017 the stupid thing is the grey of the primer really suits the car - fuck paint clear coat the primer!It does look bloody good doesn't it! It's odd primer, I've never seen it before but if you look at it in person it looks almost like satin black! Link to comment Share on other sites More sharing options...
schonker Posted November 27, 2017 Share Posted November 27, 2017 That is one good looking shell.You must be so chuffed with it danthecapriman 1 Link to comment Share on other sites More sharing options...
BorniteIdentity Posted November 27, 2017 Share Posted November 27, 2017 Speechless. I mean. Micdrop.gif Looking forward to seeing it next year. danthecapriman 1 Link to comment Share on other sites More sharing options...
Felly Magic Posted November 27, 2017 Share Posted November 27, 2017 Looking well there Dan. They've done a cracking job on it danthecapriman 1 Link to comment Share on other sites More sharing options...
320touring Posted November 27, 2017 Share Posted November 27, 2017 Yes! Tremendous. Worth the time, effort and money. Top update, would read again 21/10 danthecapriman 1 Link to comment Share on other sites More sharing options...
Guest Hooli Posted November 27, 2017 Share Posted November 27, 2017 That is spanking Dan, very damn nice. danthecapriman 1 Link to comment Share on other sites More sharing options...
Christine Posted November 27, 2017 Share Posted November 27, 2017 Mmmmmmmm tasty danthecapriman 1 Link to comment Share on other sites More sharing options...
nigel bickle Posted November 27, 2017 Share Posted November 27, 2017 Nice one Dan, well done Makes all that work worth it, eh? danthecapriman 1 Link to comment Share on other sites More sharing options...
danthecapriman Posted November 27, 2017 Author Share Posted November 27, 2017 Nice one Dan, well doneMakes all that work worth it, eh?In the end... yeah it was worth it! Link to comment Share on other sites More sharing options...
eddyramrod Posted November 27, 2017 Share Posted November 27, 2017 Now THAT is what I call progress! Looking good there Dan. Will it be on the road in time to meet Huggy in April? danthecapriman 1 Link to comment Share on other sites More sharing options...
danthecapriman Posted November 27, 2017 Author Share Posted November 27, 2017 I know you shouldn't do this. But I'm going to do it anyway, because I'm interested to know! Now it's at this stage there's no more metal to be added. Just paint.Which led me to wonder how much it's cost in new panels so far... So it's had, Front crossmember £182.11Front crossmember closing panel £118.55Front Valance (complete - genuine Ford) £835Pair headlamp bowls £250.83 eachPair front scuttle ends £147.97 eachPair A post outer panels £362.50 eachComplete rear panel £490.86Pair outer rear quarter panels £1157.94 eachPair door skins (1x genuine Ford) £417.48 eachPair inner sills £114.38 eachPair half floor pans £233.45 eachPair outer sills £173.45 eachPair rear inner arch bowls £510.25 eachPair rear inner corners £137.44 eachPair front wings (genuine Ford) £600N/S door frame (used genuine Ford) £100Fuel flap door and hinge assembly (used genuine Ford) £25 That lot comes in at nearly £9500!!!!Obviously that was spent over several years collecting parts and panels so wasn't as noticeable as if you'd done it all in one hit but even so!Add to that all the many small sheet metal repairs around the car and it starts to become an eye watering figure. I'll add up the full cost once the cars back and done but I think it's safe to say that this is the sort of job on a car I'll only be doing once as it's an insane financial commitment, even with me doing the majority of the rebuilding work and mechanical stuff myself in my own time.Goes to show, always buy the best car you can is good advice! trigger, stephen01, Asimo and 1 other 4 Link to comment Share on other sites More sharing options...
danthecapriman Posted November 27, 2017 Author Share Posted November 27, 2017 Now THAT is what I call progress! Looking good there Dan. Will it be on the road in time to meet Huggy in April?Possibly not. But there's no reason you can't come round and see it next time your down here! It'll certainly be at home by then anyway. eddyramrod 1 Link to comment Share on other sites More sharing options...
mercrocker Posted November 27, 2017 Share Posted November 27, 2017 Having seen the Capri a couple of times lately I can only say it actually does look even better in the flesh. The epoxy primer is good enough for a top-coat which is exactly what they have done with my Cowley because I didn't want shiny until its all repaired. This is going to be one hell of a Ford Capri! eddyramrod, danthecapriman and stephen01 3 Link to comment Share on other sites More sharing options...
danthecapriman Posted November 27, 2017 Author Share Posted November 27, 2017 Having seen the Capri a couple of times lately I can only say it actually does look even better in the flesh. The epoxy primer is good enough for a top-coat which is exactly what they have done with my Cowley because I didn't want shiny until its all repaired. This is going to be one hell of a Ford Capri!Funnily enough we were talking about your Cowley today when I went to see them. They loved it! Especially the younger guy there! mercrocker and eddyramrod 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now