Jump to content
danthecapriman

Project Capri. Carpet and underfelt, pg.38.

Recommended Posts

Thought I'd start a thread about my old Capri since it's now reached it's turn in the que to receive a bit of attention.

 

I've actually had this since 2001, it's an early mk2, on an M reg 1974. Being an early car it's still got mk1 rear axle and single acting type rear brake set up aswell as a few other minor differences from later cars just to use up remaining mk1 parts.

It started life here in the Portsmouth area and doesn't seem to have ventured far since.

Originally a stardust silver 1.6 L poverty model, which means virtually sod all regarding luxuries. Basic 2 pod dash with black 'crackle' finish facia, no radio, no sun roof or vinyl roof, not even a centre console!

When I got to it unfortunately it had suffered severely from serious rust and latterly a vandal attack, having it's door and rear quarter panel booted in.

 

Over the next couple of years I got it sorted and a cheap re paint into roman bronze, which was a favourite colour of mine at the time. For the first year or two it seemed fine but since then things have deteriorated.

The respray wasn't good! It's thin in places and started to micro blister in various places, worst of which is all over the bonnet. The same bodyshop also did a bit of the bodywork I hadn't finished which was also pretty poor in some places.

It's always been a great driver and never struggles at mot time so I just kept on using it and doing nothing more than collecting parts now and again with a view to sort it one day.

It's also gained a few non original extras over the years like a higher spec wood effect 2 pod dash facia (which I like more than the original), a short console, brown interior instead of the utterly fucked black original, 'laser' 4 spoke alloys and a few other things.

 

Anyway, fast forward to last weekend, when I dusted it off after winter and noticed various areas of new rust coming through or older rust that's gotten worse. So the decision was made to go for a professional resto job now before I end up finding something else to distract me (like big american cars with knackered engines!).

 

38368442804_ed11569696_o.jpg1974 Ford Capri BBK244M by Dan Clark, on Flickr

Here it is as it currently stands. Looks ok from a distance but the reality is very rough around the edges and the paint is so bad in places it's becoming embarrassing!

34825831003_cdda3675a2_o.jpgIMG_0509 by Dan Clark, on Flickr

And the interior which I'll be re trimming into black leather at some point after the body works done.

 

It's been taken to the same place that did my Mercury's engine rebuild, since they did such a good job and they seem a good professional bunch.

I dropped it off Monday afternoon for a thorough check over to build up a list of work and get a rough quote.

Today I heard back from them.

Good news so far, I suppose. It is as solid where it counts as I thought it was. Chassis is fine, original strut tops fine, most of the back end is solid and just needs a few repairs here and there.

The worst is the bottom of the windscreen surround due to the wrong seal being used and then fitted badly causing leaks. Inner sill to A post bottom corner very scabby, front wings pretty crap, and various paint defects etc.

The engine is fine, compression all in tolerances. Suspension needs work, and some brake pipes are getting quite rusty. So far so good and no surprises!

There's still more checking to do over the next few days but it sounds alright so far.

This work should be made a bit easier by having a lot of panels and parts to fix things already. The big find being a new unused pair of front wings. Very hard to find mk2 items now, though I did have to pay for them!

 

 

The plan here is to make the car solid, reliable and good looking. I'm not making a show car or going too mad as that stuffs not my thing and if it was I'd start with a better more original car.

Some of the later add ons will be ditched like the mk3 boot spoiler that I hate! And return it to more standard looking mk2 as it should be. No go faster mods or anything like that.

The main priority is to get the body sorted and painted properly (engine out job and everything) then maybe a bit of mechanical work as needed.

The original idea was to re paint back into original stardust silver, but having thought about it I'm leaning more towards another favourite Ford colour of the era, Miami blue metallic, which is a lovely colour! Any opinions?

 

This will be another expensive project but not one I think I could do at home on the drive and do justice to, so I'd prefer to farm it out and get it right this time. It also means I can carry on working on my Transit and Granada at home without another distraction!

For anyone whose interested I'll try to update this now and then as things progress. I'll also try to get the old pics of the car from when I got it so you can see how rusty it was! Bear in mind though that I paid £100 for this car in 2001 with MOT and tax! Try doing that now.

I'm sure this is going to be worth the expense, not that I'm even considering selling it of course but I've had it so long I kind of feel obligated to do right by the car in a weird way!

Share this post


Link to post
Share on other sites

Thought I'd start a thread about my old Capri since it's now reached it's turn in the que to receive a bit of attention.

I've actually had this since 2001, it's an early mk2, on an M reg 1974. Being an early car it's still got mk1 rear axle and single acting type rear brake set up aswell as a few other minor differences from later cars just to use up remaining mk1 parts.

It started life here in the Portsmouth area and doesn't seem to have ventured far since.

Originally a stardust silver 1.6 L poverty model, which means virtually sod all regarding luxuries. Basic 2 pod dash with black 'crackle' finish facia, no radio, no sun roof or vinyl roof, not even a centre console!

When I got to it unfortunately it had suffered severely from serious rust and latterly a vandal attack, having it's door and rear quarter panel booted in.

Over the next couple of years I got it sorted and a cheap re paint into roman bronze, which was a favourite colour of mine at the time. For the first year or two it seemed fine but since then things have deteriorated.

The respray wasn't good! It's thin in places and started to micro blister in various places, worst of which is all over the bonnet. The same bodyshop also did a bit of the bodywork I hadn't finished which was also pretty poor in some places.

It's always been a great driver and never struggles at mot time so I just kept on using it and doing nothing more than collecting parts now and again with a view to sort it one day.

It's also gained a few non original extras over the years like a higher spec wood effect 2 pod dash facia (which I like more than the original), a short console, brown interior instead of the utterly fucked black original, 'laser' 4 spoke alloys and a few other things.

Anyway, fast forward to last weekend, when I dusted it off after winter and noticed various areas of new rust coming through or older rust that's gotten worse. So the decision was made to go for a professional resto job now before I end up finding something else to distract me (like big american cars with knackered engines!).image.jpg1_zpseldy70ha.jpg

Here it is as it currently stands. Looks ok from a distance but the reality is very rough around the edges and the paint is so bad in places it's becoming embarrassing!2014-10-22095620_zpsb5036253.jpg

And the interior which I'll be re trimming into black leather at some point after the body works done.

It's been taken to the same place that did my Mercury's engine rebuild, since they did such a good job and they seem a good professional bunch.

I dropped it off Monday afternoon for a thorough check over to build up a list of work and get a rough quote.

Today I heard back from them.

Good news so far, I suppose. It is as solid where it counts as I thought it was. Chassis is fine, original strut tops fine, most of the back end is solid and just needs a few repairs here and there.

The worst is the bottom of the windscreen surround due to the wrong seal being used and then fitted badly causing leaks. Inner sill to A post bottom corner very scabby, front wings pretty crap, and various paint defects etc.

The engine is fine, compression all in tolerances. Suspension needs work, and some brake pipes are getting quite rusty. So far so good and no surprises!

There's still more checking to do over the next few days but it sounds alright so far.

This work should be made a bit easier by having a lot of panels and parts to fix things already. The big find being a new unused pair of front wings. Very hard to find mk2 items now, though I did have to pay for them!

The plan here is to make the car solid, reliable and good looking. I'm not making a show car or going too mad as that stuffs not my thing and if it was I'd start with a better more original car.

Some of the later add ons will be ditched like the mk3 boot spoiler that I hate! And return it to more standard looking mk2 as it should be. No go faster mods or anything like that.

The main priority is to get the body sorted and painted properly (engine out job and everything) then maybe a bit of mechanical work as needed.

The original idea was to re paint back into original stardust silver, but having thought about it I'm leaning more towards another favourite Ford colour of the era, Miami blue metallic, which is a lovely colour! Any opinions?

This will be another expensive project but not one I think I could do at home on the drive and do justice to, so I'd prefer to farm it out and get it right this time. It also means I can carry on working on my Transit and Granada at home without another distraction!

For anyone whose interested I'll try to update this now and then as things progress. I'll also try to get the old pics of the car from when I got it so you can see how rusty it was! Bear in mind though that I paid £100 for this car in 2001 with MOT and tax! Try doing that now.

I'm sure this is going to be worth the expense, not that I'm even considering selling it of course but I've had it so long I kind of feel obligated to do right by the car in a weird way!

If you are keen to do it blue, might I suggest Hawaiian Blue?

Share this post


Link to post
Share on other sites

  

Roman Bronze is my fave Ford colour, so would say keep it that colour!

 

I do still like the colour, but I've decided since most of the old paint is pretty crap and will get damaged during the metalwork process it's the ideal time for a change.

One of my biggest regrets after having it painted last time was not going blue! The decisions not final yet though, there's a lot to do before it gets painted anyway.

 

 

 

Good to see a Mk2 without vinyl roof - but that is probably played a big part in your car's survival.

Miami Blue is a good colour, but I reckon it would be great in the same paint as the Mercury!

Yes, I like them without vinyl roofs, they look nice and clean without. It didn't have one from new but somehow ended up with one when I got it, which turned out to be a right pain to try and get it all off!

Not having one definitely is a bonus, no rusty roof or pillars.

 

The paint on the Mercury looks to me very similar to Ford (Europe) Highland green, but maybe a shade lighter.

Share this post


Link to post
Share on other sites

I'd leave the interior- it has patina. Besides, the biggest headache for old ford owners is getting hold of good trim.

This is very true. The problem is if I paint the car blue or silver the interior is the wrong colour. I'm not sure a brown interior will look right with blue or silver bodywork?

On the plus side, that split on the seam of the drivers seat is the only damage to these seats, they are in very good condition otherwise, if I did re trim them in black those brown good condition seats covers would be taken off and replaced.

I've still got the cars original black interior, but it's in a bad way! Maybe re trimming the original seats and selling the good brown ones is another option?

Share this post


Link to post
Share on other sites

That interior wants leaving well alone. It's been that way for over 40 years and it's splendid. Black leather will ruin it, sorry.

 

 

And why colour change it? Roman bronze is a superb colour. Perhaps you should sell this one and buy a rough old Mark III.

Share this post


Link to post
Share on other sites

Got a few big boxes through the post today. Like Christmas!

 

Box 1, from Germany contained a new front screen rubber, rear screen rubber, chrome effect trim for the screen rubbers, new front wing/wheel arch mount brackets and a brand new never used genuine Ford rear light cluster for my Transit!

 

Box 2, contained a pair of door glass rubber weather strips, and a pair of new door seals.

 

I also had a new headlining kit and clips delivered on Tuesday, same as the original in the fetching shade of 'putty', which is beige!

 

Just got a new carpet and under felt/sound deadening pads still outstanding. Made to order apparently.

 

I've got to find all the bits for this project now, everything I've ever bought for it is scattered around the house and shed safely stored, so well I'm having a job remembering where.

It's not a cheap hobby anymore, this old Ford thing. That little lot above cost a shit load. The Transit light alone was £90!

Once I've got all the parts together I'll get a pic of the parts pile.

Share this post


Link to post
Share on other sites

I love that, is it a 'Mk1.5'? It must be the colour but that front end screams Mk2 at me.

Anyhow, it looks ace and I'm jealous!

It's a very early one. They started making the mk2 in January 74, this one was built March 74 so it'll be amongst the very oldest mk2's now.

I think I read somewhere these early ones are basically a mk1 facelift Capri but with a new 3 door mk2 body style.

Apparently the first mk3,s were similar, essentially a mk2 but with mk3 style parts added on.

Share this post


Link to post
Share on other sites

Parts are mega expensive now, it's one of the theorys behind why there's been so many stolen recently. Yours looks great already in Bronze, I think that colour suits the 70sness of that shape especially with the matching interior.

 

My Cortina is the same age as yours and is Miami blue.

 

post-3625-145702047572_thumb.jpg

Share this post


Link to post
Share on other sites

Cosmos blue? Same as my old cortina. Think it would go well with some plain silver sport steels.

attachicon.gif20131019_142323.jpg

My Dad had a Cortina like that in Cosmos Blue with an amazeballs brown velour interior.   2.0 Ghia.   LME 450W where are you now?

 

Brown can go well with blue paint but why go to the hassle and expense of repainting?   It looks good now, just tidy up and enjoy.

Share this post


Link to post
Share on other sites

Good move, Dan.

Miami blue?  Maybe, maybe not, for a Capri.  Hawaiian or Cosmos suits it much better IMHO.  Or Peppermint Green?  The brown interior would work well with that!  I remember many years ago, the garage where I worked had a Hawaiian Blue mk2 on sale, and one in Roman Bronze.  I always thought the blue one looked particularly smart.  Just my 2 cents...

Share this post


Link to post
Share on other sites

It's not just Ford - the price of a lot of stuff is getting silly. Certain Parts for my SD1are getting hard to obtain, even stuff like Brake drums. Car prices are getting silly as well - a series 1 2600 that needed a lot of work went for £1650 on a certain auction site.

Share this post


Link to post
Share on other sites

It's a very early one. They started making the mk2 in January 74, this one was built March 74 so it'll be amongst the very oldest mk2's now.

I think I read somewhere these early ones are basically a mk1 facelift Capri but with a new 3 door mk2 body style.

Apparently the first mk3,s were similar, essentially a mk2 but with mk3 style parts added on.

 

 

I do (vaguely) recall seeing 1975 Mk2s, about but I still can't get my head round them being that early. Roman bronze is one of the nicest colours Ford knocked out in the 1970s, I had a Mk2 1.6GL in that colour, albeit as a spares car for my Olympic (?) blue Mk2, another nice colour that one. 

Share this post


Link to post
Share on other sites

If it's 1974, I don't think it will be Roman Polanski bronze but the very similar Copper brown met. colour code 7. What does the VIN plate say?

It was Stardust silver originally according to the vin tag, 'L' spec and 'BLK' interior, which means black!

Hence why I'm considering a colour swap and going back to a black interior.

I'm a bit less into Roman bronze now than I was when I first had it painted, I still like it though. But, I love Miami blue, it's a lovely colour and I think it'll look fantastic on this, especially without a vinyl roof.

The reason I was thinking about going to original silver was purely to return it to original ish condition, but given how much has changed and the amount of bodywork it's already had replaced is it really worth worrying about? Why not go for something I really like instead, hence the Miami blue idea.

 

I think Roman bronze was introduced in 1975 btw, so this cars technically too old to of ever had it from new. I did briefly consider doing it in Daytona yellow last time it got painted! Nice 70's colour but I'm glad I didn't do that now!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Fumbler
      To mark the genesis of my fleet project thread I here present my new car: a 1997 Nissan Micra Shape-


      It really looks that good. There is a reason for this: its previous owner was an old lady who loved the thing so much so she made every effort to keep it in good shape. It originally came from Fleet in the GU postcode which suggests to me it was bought by the present dealer at auction, hence arriving down here in Kent. Before seeing the car I checked its MOT history and its only fails were thanks to broken stoplights, which shows me that it was very well cared for. I suppose an example of this was that on the last MOT, an advisory was a corroded rear silencer. The silencer on the car when I saw it was new. Methinks the lady wanted to keep it as good as possible. It was kept in a garage and so all the bumpers and black trim are very black and the tyres are in very good condition. Spare never used! Also included a free Dettol first aid kit from 1997.
      This car has 15000 genuine miles on the clock. We clocked over 15000 during the test drive! The lady owner really only trundled around her village in it and the MOT shows that it only did some meagre miles between tests. This, of course, came at a price. We saw a cherry red Micra from 2002 at the same dealer. Paint was shoddy and when they washed it the boot had massive sections of bare metal and it wasn't very happy. This car, however, is in fabulous condition and there was no contest between the two cars- it really is that good, inside and out. Immaculate interior, driver's airbag, cassette player... all there and all functioning (apart from cassette thanks to new battery and failed display). This meant that I bought it for £1600, £100 over what was my uppermost limit, but I knew I wouldn't see another like this that was in as good shape for a fair while. It was priced very ambitiously, at £1990, so I'm content in the fact I managed to slash a few hundred off the price. There wasn't that much paperwork though. All the dealership received was the logbook with 3 service stamps from 1998, 1999 and 2000, the radio key pass, a National Trust sticker, and the original paperwork holder. I suspect the old lady died and had her car auctioned, and the massive file of paperwork is now someone's egg carton, along will everything else she owned.

      As always, this car isn't exactly in showroom condition. While the inside is great and the floor is solid, and the underseal is in great shape, the not undersealed parts need a small looking at. Mainly the rear of the driver's side sill. It's really the only bubbling on the car. I suspect a well aimed stonechip managed to fester over the wintery salted roads, making it rust even more. It's around the size of a 5p piece, and will give me the opportunity to spray the insides of the sill with some chain oil to prevent any further corrosion. Behind the fuel tank there are a few rusty joints- places where the spraygun cannot get paint onto- which some Vactan and Dynax should put to rights. Alternator belt looks original because of the cracking and Nissan badges and will need doing soon as well as the front plate. As much as I like the 90's font and original dealer surround, the dishevelled R and general water ingress is a persistant MOT advisory. It could be the MOT station being strict (and most likely is considering there's a Saxo down the road with far worse blackening), however for the sake of peace of mind and all that, I'll get a new one made. The rear has already been replaced indicating this has happened before.
      All in all, I think this is a nice plucky motor. I'll have it by the end of the week; just got to sort out tax, insurance, and it's going to have an MOT. As part of the deal it's getting the MOT and an oil and filter change which will be something ticked off the list. It has some love scratches and chips here and there, but it drives well, is stiff and controllable, and should make out to be a nice summer project!
    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By TripleRich
      Hi all, new to the forum.  Thought you might be interested in what I've got myself into
      I'd been after my first classic car for a while.  If it's big and made in the 70s I'm interested.  Looked at few things like P6s, Zodiacs, Victors, SD1s and various other things.  Problem was I didn't want to spend a boatload of money on something that looked alright but underneath was actually a total heap.  The solution was to buy a complete heap in the first place and spend the money fixing it.
      So in January I went ahead and bought this from a colleague at work who was moving away and needed to get shot of it.

      It's a part finished restoration (I prefer not started) and it needs a whole load of help if it's going to stand any chance of using a road again.
      Pros
      It's right up my street.  Granada Coupes are quite odd and certainly stand out from the norm.
      It still has the original engine, box, interior and most trim.
      It came with loads of panels I need to repair it (mostly original Ford stock).
      It came with so many spares I could probably build a few Granadas and still have stuff left over.
      It was cheap.
      Cons
      Most of the front end has been cut off.
      Most of the body structure is quite rotten.
      It's going to take me ages.
      I work at a restoration company and my boss kindly allows me to keep the car there.  So I've got access to all the gear I need to restore it.  I've been busy on the car for a while now so will post more pics over the coming days.
      Cheers 
    • By strangeangel
      I thought I'd start a thread for this as I'll probably end up asking all sorts of questions, given that this is my first 'proper' Citroën.
       
      So... the ground clearance lever won't go all the way to the highest setting (all others work), which is bad 'cos the book says I need it to do that in order to check the LHM level. It feels like something's seized, so I don't want to force it. Any ideas for a plan of attack would be much appreciated.
       
      Next up are the wheels. I now have a set of 205 pepperpots that have just gone off for powder coating & I need to get some tyres for them. The handbook says the car should have 165/70R14s on, the wheels came with 185/65R14 on. Any thoughts about what size I should get please? Cheers.
       
×
×
  • Create New...