Jump to content
snagglepuss

Snagglepuss Motors - Hot hot hot...

Recommended Posts

Re: drop links, I read on here someone's ingenious solution to getting them off was to simply use a large breaker bar to sheer the nut off, by tightening it rather than trying to undo it and having to deal with the spinning ball joint. Never tried it myself but I can't see any reason why it wouldn't work

Share this post


Link to post
Share on other sites

http://www.volvoforums.org.uk/showpost.php?p=1843916&postcount=274

 

If that doesn't work I'll give you a unit with code at the next meet.

I owe you a coffee or beer!

 

Code came through for free and so we now have toons.

Share this post


Link to post
Share on other sites

Re: drop links, I read on here someone's ingenious solution to getting them off was to simply use a large breaker bar to sheer the nut off, by tightening it rather than trying to undo it and having to deal with the spinning ball joint. Never tried it myself but I can't see any reason why it wouldn't work

 

I think this method might just strip the thread, that's what happened when I used an impact gun to do mine up. My preferred solution if they don't have flats is to use an open ended spanner to dislocate the joint, then grip the ball with a pair of mole grips.

Share this post


Link to post
Share on other sites

Got some time and sunshine today to play.

 

Cheeky shot of the youngsters

post-3994-145823609267_thumb.jpg

And the more mature members

294a5e4fe470e2a64269c54311cb14b3.jpg

 

First off the v40 was still letting in a trickle of water so I iced the outer lights

f1ec18cf984fc10273065e44e514d86d.jpg

The indicators needed tangoing

a73fa58fe51625d9a8e2b660d1a4562a.jpg

Then continued stripping interior. I think it is going to be a carpet out jobbie

a1f854ab366e66a23f3587f795e191f1.jpg

 

I need to work out how to remove the front seats without setting off airbags.

 

The sound deadening is sopping wet so needs a good dry day.

 

b73e1e60d20047d33f382821b126a808.jpg

 

Swift has been running cold. Bonnet up. What a tiny battery 07fd0b77e9059f7b579eb9103618ed54.jpg

e41fe89202624045647c5cde6b154eab.jpg

Old thermostatf38d9c898da773035c434e03f69bc195.jpg

Diagnosis -fucked

 

New one didn't fit. A bit too big

473b86be4cee9c5d151e71d1443b7aae.jpg

 

Will rectify that tomorrow. Tomorrow is clean xantia and oil change, before putting it up for sale.

Share this post


Link to post
Share on other sites

To remove seats without setting off airbags and tensioners I just disconnect the battery and go have a coffee. Come back to car half hour later and rip out the seats!

 

Not failed me yet and I've plenty of experience with it :D

Hbol says there is a special clip you put in the side to stop it going off manually. Unsurprisingly both of mine are missing

 

I didn't know if this is because it is side impact bags.

 

Half tempted by the leather interior on eBay! But cash flow is a bit shit at moment.

Share this post


Link to post
Share on other sites

Put the interior back into the v40 and one of the seat back rest bolts has cross threaded. Fucksticks.

 

 

Looked at removing the door in the swift and one of the screws holding the door on is rusted tight. And is at the bottom of the pull close. Fucking cars.

Share this post


Link to post
Share on other sites

Serviced the swift in readiness for Scottish trip this evening after the departure of lespace. Aided by my furry apprentice

 

5852648869c37d09eafb943393e369c1.jpg

 

Its great not to have to remove plastic covers etc.

 

New and old

 

6cc0f23f85c59842999895959e4cf4af.jpg

 

Not so sparky

e2221c074179a9d982be02d1dbf163cf.jpg

No1 cylinder plug was covered in a grey deposit.

 

Off with the cap

0a5cabf58e169853d272aad512cdd4ad.jpg

 

I love neat touches that help things along. Firing order plus rotation

88e000aabd6e437e0d82d332e21b3135.jpg

 

Aside from a dodgy HT lead (set on order) all done in 20 minutes for less than £30.

 

Runs a lot smoother and idles better.

 

Next job was the drivers door handle. Previously the scene of an attempted break in

b91a3308578da1075e1e7733b205ce20.jpg

Following 320 advice I took a chiesel to the stuck screw and got the door card off. a029b9cca4bc6694f7a25ef110c3236b.jpg

 

Handle was one of those jobs that you need 15 hands for, so no pictures. New one fitted. 57369ef722b3df7383454a647e5985dd.jpg

 

Took the opportunity to look at the dropping window. It has broken a metal tab at the bottom. If I could use a sparkly stick it is a two second fix. Will see what the options are.

Share this post


Link to post
Share on other sites

More jobs seemingly done with ease. You're due a PITA full day of little achievement soon.

How did the apprentice do? Manage to stop him eating the old filter?

He was very well behaved, managed not to lick or eat anything bad. Thanks for that bucket man! Today was such a thing.

 

Decided that the sun had got his hat on, I would fit new door locks to the swift. The passenger one works with some wiggling and drivers doesn't.

 

Locks were £12 for both including 2 keys.

 

 

Drivers side knocked off with ease, I set sail for the passenger side.

 

Take 1 door, with funky trim.

 

36d24cdea763174cd8ff5c883318ada5.jpg

Add some trim tools

cd45759a83c5dbe9c565e9bf7667362e.jpg

A dash of rusty screws

9daef7c69da0cd7346d76b092060b921.jpg

A smattering of impact driver

b3734000efc379ea9203c7c624e1fc31.jpg

Gas mark2 for 10 seconds and success33b3e94a81f2718d8bab6a91ab0aeed8.jpg

 

Then off with the door car

d52fb8532221f722a6c0b3848d21621b.jpg145844272c73bf78db582925689b8464.jpg

To behold the promised land

0c66b4c5a3d8811d051d7c91d87c83cf.jpg

101058fb5c13a5e16ef65485211396f7.jpg67fe80e69765bc2bb4ba7bb1c20fa0e0.jpg

Door handle out and whip the lock outc0afd7d3ae3335d71dce815c116e0f48.jpg

That was the were the warning signs began. The outer handle cracked so added that to the buy list.

 

Took the opportunity to sort out the window. It has been dropping off its rails. You can sort of see it is out of it guide5f630d8ce1dd82f66ac10f2d650b0e42.jpg

I was expecting a cracked runner like the drivers side.

2dfbafec29094eb3557542f14a659460.jpgNot cracked so slotted back in and lubed 7eb9e33917d6531a3ef5b51b50e0293a.jpg

Job fixed. Slides easily and is slipperyer that a lard coated eel.

60ac4069ce8c6ab5de2457d3e30f707a.jpg

 

Handle back in and the end is in sight. 5a8de7e0725294a893150b4e08002839.jpg

 

Then it all went wrong. The inner handle cracked and the rods fell out. I spent an hour trying to get it back together. Then chucked tools in the car and left it for today.

 

Volvo is booked in for an MOT tomorrow. Expecting a fail on drop links and perhaps crack in windscreen.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By dome
      This evening I venture forth into hitherto unknown lands (Kirkintilloch) to collect my latest acquisition.

      Which, naturally, has issues.

      I have purchased my first line of defence.



      Which appears to have antigravity properties

      More will follow this evening...
    • By DaveDorson
      I really need to unload some of the cars.
       
      Doesn't matter how much I try and justify it to myself, I've just got way too many at the moment.
       
      This is a large problem that became very apparent when I started looking at moving workshop to somewhere larger to consolidate where I keep my stuff and hopefully make some headroom.  The realisation struck me that I've got enough work to keep me going until retirement, and it's simply not worth it.  I need to cut some stuff out and make a clean break I think.
       
      Current list.
       
      1972 Beetle 1200 restoration (keeping and finishing, it's Sarah's car so probably doesn't count, to be fair I've done a fair bit on this)
       
      2000 beetle 2.0 (Sarah's car, needs a battery and some welding doing, but given she's not driving it's fine, and it can be quickly made into a car again.  I really need to keep this one too.
       
      1984 Caravelle restoration (keeping and finishing, had this forever and can't part with it.)
       
      1974 Subaru Beetle (can't really sell this one, made a promise on it and need to see it through)
       
      2006 Mondeo ST 2.2 Diesel (I'm keeping this, as it's my daily driver)
       
      So that brings us to the stuff I really need to get rid of.
       
      2002 Mondeo ST220 in Infra Red (I bought this because nothing appreciates like a fast ford, it's a project but an easy one, and I've not touched it for three years now.  It's in a dry garage, this can be for sale.  I keep missing the guy with the garage access to get the pictures done
       
      Here's one from just before it went into storage.  I can't imagine being that it's sat in a dry garage it looks a lot worse.  Battery will be shot, needs a window reg, they're about £20, I might have one.  It had a bit of a sump weep and needed discs and pads, and probably tyres too.  I don't remember seeing any rot in there, but it may have started to go a bit by the front wings.
       
      FB_IMG_1548892719181 by davedorson, on Flickr
       
      it's infra red, I've got some good part worn tyres I can sell with it for the right money, needs re-commissioning.  Plate is N99 JLM,
       
       
       
       
      1999 Golf S 1.9 TD estate.  That's the one that was meant to go last week.  All working now, just needs me to put some coolant in it and get a battery, the chap was meant to bring one, then let me down, MOT'd till March 29th.  Might just get this re-MOT'd and park it down the unit as a spare "pool" car.  NOW SOLD
       
      IMG_20181215_100535522 by davedorson, on Flickr
       
      W124 300E (m103 3.0), ex David Bailey car apparently.  Lost all the paperwork, probably worthless, refuses to run right, I suspect the K-Jet is shagged.  I just can't find the motivation to do this.  It's fairly solid, I've got new discs and pads in the boot for it.  Really should just get rid of this one.  if anyone wants this please get in touch, and I'll do some photos for you. 
       
      2018-08-09_09-18-46 by davedorson, on Flickr
       
      It won't come on the 17's, as they're valuable on their own, I've got some original wheels, but I need to sort them out with tyres, I'll try and do that and get some updated ones.  NOW SOLD
       
      S124 200TE, rusty.  Currently at a friends in Corby who's been apparently doing the welding on it for me.  I'm yet to see evidence of this.  I've basically written it off as a bad experience.  If anyone wants this please get in touch.  It does drive, but it's rough as arseholes due to degraded ignition bits and very rusty, although it might be less rusty now.  I dunno, I'll arrange some photos if I can.  Reg is G878ERP if you're curious, as you can see, off the road for ages!  NOT MOVED SINCE I STARTED THIS THREAD, ANYONE FEELING BRAVE?  MESSAGE ME!
    • By strangeangel
      I thought I'd start a thread for this as I'll probably end up asking all sorts of questions, given that this is my first 'proper' Citroën.
       
      So... the ground clearance lever won't go all the way to the highest setting (all others work), which is bad 'cos the book says I need it to do that in order to check the LHM level. It feels like something's seized, so I don't want to force it. Any ideas for a plan of attack would be much appreciated.
       
      Next up are the wheels. I now have a set of 205 pepperpots that have just gone off for powder coating & I need to get some tyres for them. The handbook says the car should have 165/70R14s on, the wheels came with 185/65R14 on. Any thoughts about what size I should get please? Cheers.
       
×
×
  • Create New...