danthecapriman Posted April 17, 2020 Share Posted April 17, 2020 When I did mine I think I still had a full sump of old oil and it just circulated as it normally would, except the pipes were now disconnected so it couldn’t actually circulate in a closed system so it spat the old oil straight out and sucked the new in. You’ve just got to be careful you don’t allow it to run dry! I remember doing it, as you can literally watch the fluid come out and it very obviously starts a dirty watery manky colour then gradually turns cherry red as the new oil starts to come through. The 740 I’ve got now, didn’t have this problem as I changed the radiator for other reasons so the coolant didn’t mix! The old ATF was dirty and old though so on this one I just drained the oil from the sump, changed the autobox filter, new sump gasket and refilled it via the dipstick hole. Then fire it up, cycle through the gears and get it warm, then check oil level. I could do with changing the oil again soon though. *im fairly sure it was the old 740 saloon I did this with, but there’s a chance it might have been my old mk2 Granada... can’t see it making a difference though! Edit; Thinking about this, I think I did do the old 740 but I put a funnel and length of fuel hose down the dipstick tube to fill it up as the outlet pumped the old oil out. You’ve got to try to keep pace with the pump as you pour the new oil into the funnel. oh, and don’t rev it when your doing this! aldo135 1 Link to comment Share on other sites More sharing options...
aldo135 Posted April 17, 2020 Author Share Posted April 17, 2020 Thanks Dan! Will update next week when I’ve got the radiator danthecapriman 1 Link to comment Share on other sites More sharing options...
Tickman Posted April 17, 2020 Share Posted April 17, 2020 Andy, @cms206 did the pipes off at the rad ATF change on one of his so might be able to give you some pointers. aldo135 1 Link to comment Share on other sites More sharing options...
rml2345 Posted April 17, 2020 Share Posted April 17, 2020 I believe Mr. Flowers has done it as well and can offer pointers. It's an AW71 in this isn't it? If so, they are regarded as being stronger than the ZF22 so hopefully it won't have done any long term harm to the box. Nice to see it finally getting some attention! aldo135 1 Link to comment Share on other sites More sharing options...
aldo135 Posted April 17, 2020 Author Share Posted April 17, 2020 It is an AW71, fingers crossed rml2345 1 Link to comment Share on other sites More sharing options...
danthecapriman Posted April 17, 2020 Share Posted April 17, 2020 My current one is a ZF, I can’t remember which way round it is, but I’m sure with one of the two boxes there’s thinking that you can damage them by revving the engine while it’s in P (or possibly N, my memory is shit!) as the oil pump doesn’t work in those gear positions, or something like that anyway. aldo, did you get a new autobox filter? Might be a good opportunity to replace it? Link to comment Share on other sites More sharing options...
rml2345 Posted April 18, 2020 Share Posted April 18, 2020 @danthecapriman it's the ZF box you can't rev in park or neutral as it destroys the clutch packs. Before flushing the oil on mine I checked what a recon unit was just in case it was terminally fuckerated and nearly cried... danthecapriman 1 Link to comment Share on other sites More sharing options...
Talbot Posted April 18, 2020 Share Posted April 18, 2020 3 hours ago, rml2345 said: I checked what a recon unit was A recon unit is a second-hand unit that has been returned to factory specifications with the use of new components where necessary, but that's not important right now. rml2345, danthecapriman and Dan302 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now