Shite Ron Posted February 25, 2021 Share Posted February 25, 2021 24 minutes ago, DodgyBastard said: Picked up some cheap alloys I'm going to try fitting on the stellar. I'm pretty sure they are Ghia alloys from a Capri or something. They were fitted on mk2 and 3 Capri S and Ghia also optional extra in the mk2 Escort Ghia. Link to comment Share on other sites More sharing options...
DodgyBastard Posted February 25, 2021 Author Share Posted February 25, 2021 Comparing them to an original single ford wheel I had lying around they are almost exactly the same but look like they take sleeved nuts rather than the tapered nuts the ford alloy uses. Link to comment Share on other sites More sharing options...
Leyland Worldmaster Posted February 25, 2021 Share Posted February 25, 2021 On 12/29/2020 at 5:19 PM, DodgyBastard said: Some more silly videos we made today... Fucking hell! I'm sure that Stellar used to be a Minicab in the Maidstone area when it was new. It has a Maidstone VRM... If so, it was immaculately kept as a Minicab for a considerable amount of time. If it is that car, it was my first Hyundai experience and it took us to hospital when the younger brother was launched... 👍 👍 👍 😎 😎 😎 Dick Longbridge and Sidclark96 2 Link to comment Share on other sites More sharing options...
DodgyBastard Posted February 25, 2021 Author Share Posted February 25, 2021 Looks fine to me... rainagain, timolloyd, RayMK and 6 others 9 Link to comment Share on other sites More sharing options...
Mr Laurence Posted February 26, 2021 Share Posted February 26, 2021 That’s looking nice now. You’ve done a ‘stellar’ job of tidying it up. Were those Ford wheels also used on Cortinas? I think I’ve seen a few with them. They should look good on the Hyundai. Link to comment Share on other sites More sharing options...
danthecapriman Posted February 26, 2021 Share Posted February 26, 2021 9 hours ago, Mr Laurence said: That’s looking nice now. You’ve done a ‘stellar’ job of tidying it up. Were those Ford wheels also used on Cortinas? I think I’ve seen a few with them. They should look good on the Hyundai. I don’t believe these wheels were used on the Cortina. The Cortina Ghia wheel was a smaller 4 stud version of the mk2 Granada Ghia wheel. These Ghia/S wheels are a bit earlier than the Cortina/Granada Ghia style, as posted above, likely from a mk2 or early mk3 Capri. Mr Laurence and Shite Ron 2 Link to comment Share on other sites More sharing options...
DodgyBastard Posted February 26, 2021 Author Share Posted February 26, 2021 Actually, it looks a bit crap but it'll do for now. somewhatfoolish, mk2_craig and rainagain 3 Link to comment Share on other sites More sharing options...
bezzabsa Posted February 26, 2021 Share Posted February 26, 2021 Hmmm looks like my standard of repair will be ok on the Kudos then LOL.. and I had a set of those wheels on my MK4 cortina Link to comment Share on other sites More sharing options...
DodgyBastard Posted February 27, 2021 Author Share Posted February 27, 2021 I had a look at the brakes on the Subaru, I really needn't have worried about the bleed nipple shearing as it freed off without issue. Bleeding the brakes stopped them binding as much but they are still shit so going to order a rebuild kit safe in the knowledge that the bleed nipples aren't going to be an issue. Link to comment Share on other sites More sharing options...
Steviemillar Posted February 28, 2021 Share Posted February 28, 2021 On 25/02/2021 at 19:59, DodgyBastard said: Comparing them to an original single ford wheel I had lying around they are almost exactly the same but look like they take sleeved nuts rather than the tapered nuts the ford alloy uses. The Ghia wheels you have that need the flat washer nuts are the same as fitted to early Mk2 Capri, the “spokes” are sharper edged too, the later Ghia wheel used the taper nuts with the spokes being smoother compared to the earlier ones. danthecapriman 1 Link to comment Share on other sites More sharing options...
DodgyBastard Posted March 8, 2021 Author Share Posted March 8, 2021 After a few false starts I've bought my first car of 2021, a 1.3 mk4 Escort with a broken drivers side headlight lens... It drives well enough for what it is... danthecapriman, Arthur Foxhake, Dannyk and 20 others 23 Link to comment Share on other sites More sharing options...
big_al_granvia Posted March 8, 2021 Share Posted March 8, 2021 proper classic, crossflow engine??? Link to comment Share on other sites More sharing options...
DodgyBastard Posted March 8, 2021 Author Share Posted March 8, 2021 6 minutes ago, big_al_granvia said: proper classic, crossflow engine??? I haven't a fucking clue! DSdriver 1 Link to comment Share on other sites More sharing options...
Shite Ron Posted March 8, 2021 Share Posted March 8, 2021 My dad had a brand new 1.3L in the same colour on an E plate, it was a cross flow, by now the cvh was 1.4. Ours replaced a B reg 1.3L which was cvh. The mk4 was incredibly slow by comparison. That looks real poverty spec, should be popular when you sell. mk2_craig 1 Link to comment Share on other sites More sharing options...
Split_Pin Posted March 8, 2021 Share Posted March 8, 2021 Will either be the old Valencia chapper or the CVH. Hope it's the former! Link to comment Share on other sites More sharing options...
Cord Fourteener Posted March 8, 2021 Share Posted March 8, 2021 That rear bumper looks like it needs some linseed oil, looks nice generally👍 57 minutes ago, DodgyBastard said: Link to comment Share on other sites More sharing options...
bangernomics Posted March 8, 2021 Share Posted March 8, 2021 Get the plugs out if you dare. big_al_granvia 1 Link to comment Share on other sites More sharing options...
rusty998 Posted March 8, 2021 Share Posted March 8, 2021 1 hour ago, Split_Pin said: Will either be the old Valencia chapper or the CVH. Hope it's the former! I would think that its going to be the Valencia with the familiar tappity tap tap 🙂 Link to comment Share on other sites More sharing options...
DodgyBastard Posted March 9, 2021 Author Share Posted March 9, 2021 I've decided to do a roffle over on facebook for the Stellar, I don't imagine many on here will want to participate but just in case here's the link: https://fb.me/e/1zRCSFQkR I've not done all that much in my ownership apart from replacing the alternator and a classic giffer repair of welding/wobbing up the worst of the rear arches, it isn't pretty but shouldn't cause any issue come mot time. Talking of mot's, it doesn't have one, it failed on corroded rear brake lines and a wheel bearing about two years ago and hasn't been for a test since. Having owned and used the blue stellar daily I know that they just aren't the cars for me, I sold the blue one a while ago and know my heart just isn't in getting this one roadworthy. For the roffle I'm asking £20 a go which probably seems a little steep but I'm also offering the car to be transported anywhere in the UK for free, I'm hoping to fuck that nobody from Cornwall wants it but no matter where the winner wants it delivered to on the UK mainland I will pay to have it transported there. mat_the_cat, Cord Fourteener, Six-cylinder and 2 others 5 Link to comment Share on other sites More sharing options...
cort1977 Posted March 9, 2021 Share Posted March 9, 2021 GLWTR. Is it me or is there a hint of Maserati 430 to this car? Without going all RR, lowering it a bit on some 80s Zender alloys would look pretty cool I think. Edit -just found they were designed by Giugiaro, makes sense. mk2_craig 1 Link to comment Share on other sites More sharing options...
Six-cylinder Posted March 9, 2021 Share Posted March 9, 2021 16 minutes ago, cort1977 said: Is it me or is there a hint of Maserati 430 to this car? I see it as well, unfortunately when ever a Stellar has visited me my 425 has not been about. cort1977 1 Link to comment Share on other sites More sharing options...
wesacosa Posted March 9, 2021 Share Posted March 9, 2021 47 minutes ago, DodgyBastard said: I've decided to do a roffle over on facebook for the Stellar, I don't imagine many on here will want to participate but just in case here's the link: https://fb.me/e/1zRCSFQkR I've not done all that much in my ownership apart from replacing the alternator and a classic giffer repair of welding/wobbing up the worst of the rear arches, it isn't pretty but shouldn't cause any issue come mot time. Talking of mot's, it doesn't have one, it failed on corroded rear brake lines and a wheel bearing about two years ago and hasn't been for a test since. Having owned and used the blue stellar daily I know that they just aren't the cars for me, I sold the blue one a while ago and know my heart just isn't in getting this one roadworthy. For the roffle I'm asking £20 a go which probably seems a little steep but I'm also offering the car to be transported anywhere in the UK for free, I'm hoping to fuck that nobody from Cornwall wants it but no matter where the winner wants it delivered to on the UK mainland I will pay to have it transported there. I had spent the last week wondering how I could buy this and get it down to me, now I don't have to. Ticket bought !! Just need to will my number to be drawn now Link to comment Share on other sites More sharing options...
DodgyBastard Posted March 9, 2021 Author Share Posted March 9, 2021 Found a couple of crusty bits, repaired one so far and took a heat gun to the bumper. I'm just willing myself to do the other side which has a large rusty hole in the middle of the sill. Mrs6C, rainagain, Shite Ron and 11 others 14 Link to comment Share on other sites More sharing options...
Split_Pin Posted March 9, 2021 Share Posted March 9, 2021 All 5 doors and Orions rusted there, fuck knows why, looks like a random place. Link to comment Share on other sites More sharing options...
DodgyBastard Posted March 9, 2021 Author Share Posted March 9, 2021 A little bit more done... Split_Pin, Fumbler, juular and 14 others 17 Link to comment Share on other sites More sharing options...
DodgyBastard Posted March 9, 2021 Author Share Posted March 9, 2021 No holes here... Cord Fourteener, Dirk Diggler, RayMK and 11 others 14 Link to comment Share on other sites More sharing options...
DodgyBastard Posted March 9, 2021 Author Share Posted March 9, 2021 Welding finished for now! Dirk Diggler, Shite Ron, Skizzer and 15 others 18 Link to comment Share on other sites More sharing options...
DodgyBastard Posted March 9, 2021 Author Share Posted March 9, 2021 goosey, Shite Ron, Jim Bell and 2 others 5 Link to comment Share on other sites More sharing options...
goosey Posted March 9, 2021 Share Posted March 9, 2021 I like that, I have a soft spot for mk4 escorts as I had one as my first car I remember having to repair the same area’s on my G reg Escort Eclipse back in 2000 Link to comment Share on other sites More sharing options...
CortinaDave Posted March 9, 2021 Share Posted March 9, 2021 Thats fantastically terrible. My old man got a G reg Escort popular brand new from Laidlaws in Kirkcaldy as a company car. Coming from a 76 Viva we felt like royalty in it. I had an Eclipse 20 or so years ago. It had electric windows which seemed a big deal. I remember that 1.3 HCS as being hellishly noisy though, sounded like the tappets needed setting no matter what you did Shite Ron, mk2_craig and DodgyBastard 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now