Jump to content

Rusty Triumphs in Scotland - Dolomite in "most reliable" shocker - 08/02/24


captain_70s

Recommended Posts

Guess which guy read the book AFTER making changes and then had to go back and redo everything to actually be right...

88240542_2757756651008863_3532195573975220224_n.jpg.81855d5b0a10501edfe6c38201d0601e.jpg

Carb air flow balanced using the highly technical method of partially covering the intake of each carb with my hand and feeling the air draw. I've yet to fuck around with the mixture.

More pressingly I started disconnecting vac hoses and plugging them to see if anything improved and found one that did! I've no idea what it's for but plugging it made the car much less spluttery at idle so we'll see how that pans out. I also spotted some cracking in the carb mounts so it could well be sucking in air and running lean, although dousing the area in WD40 didn't seem to affect it so it may just be surface perishing.

Finally I also noticed the fuel lines are all looking fairly fucked, for want of a better term. Anybody know a good supplier for ethanol-proof hose? I know there is seemingly a lot of fake stuff floating about...

 

Link to comment
Share on other sites

1 hour ago, captain_70s said:

Finally I also noticed the fuel lines are all looking fairly fucked, for want of a better term. Anybody know a good supplier for ethanol-proof hose? I know there is seemingly a lot of fake stuff floating about...

here is the stuff @Zelandeth fitted to his Model 70 and I bought for mine on his recommendation :) https://www.ebay.co.uk/itm/223008964822 (I think the seller should have other sizes if needed!)

(although I still need to fit it to mine! a slightly leaky fuel tank sadly scarpered that plan, so I cant personally vouch for its toughness, but I dont think Zel has had any issue with it in TPA)

BTW I have been thoroughly enjoying your updates/postings in this thread :) 

Link to comment
Share on other sites

I washed the car.

89228463_10222707962346895_5121587108493918208_o.thumb.jpg.dcbd99597e60d71a6b9589e0de4e0a63.jpg

Removing several months of mud revealed GROT.

90083251_2626983017542912_4760254546423316480_n.thumb.jpg.5920be0cc447653c3388176924e18f80.jpg

89550068_1042904972763397_6005990625009205248_n.thumb.jpg.a6d13b9c6b6c1c6f9bc7b9f4164d996c.jpg

89668856_860525834388185_6510673673408479232_n.thumb.jpg.53dcec9db42d5c1a937e2ab73d234ce4.jpg

89607155_513654025964682_4884723390151131136_n.thumb.jpg.04eb0a3cb1e967067842071cbe1e974c.jpg

89470100_252460545770945_4468877642870816768_n.thumb.jpg.ea018ed4280d47dee3aced5dbda7d2b2.jpg

 

Now, some of you may be thinking "I'm sure it didn't look that bad last year", and that is correct. However that's mostly because all the filler that was on the car when I bought it has now fallen off, and because I rattle canned the arches every couple of months over summer to keep them blue... I have a cunning plan involving sanding all the rust flat fillering over it and pretending it doesn't exist until I have a garage.

Link to comment
Share on other sites

I have seen a couple of folks sand back arches like that, hit with rust converter, and then repair with one of the various metal epoxies on the market.  Not as cheap as filler or fibreglass but seemed less prone to cracking and moisture ingress and a good way to deal with pinholes.  Cleaning off the rust as much as you can and slapping paint on, as you were through the summer, is the best way to get maximum mileage out of what you've got really and allows you to monitor things and slow it down rather than hiding it all under wob.  It's not as horrendous as it could be for an old car living outdoors and being used all year round in Scotland.  Give it another dose of sand paper, rust convertor, and rattlecan and eke it out for a bit longer.

There's also another potential arch donor that's closer related, though I'm not sure on availability/cost of panels.

rover-classix.jpg

Link to comment
Share on other sites

8 hours ago, SiC said:

Oof. Reckon it's going to last another 4 years and hit MOT exemption? Or even have a chance to pass the MOT in 69 days time?

It should pass the MOT with a bit of tape/filler action, it's still passable underneath, it just looks like utter shit. Although a guy in a Range Rover did open his window to say it was "very cool" on Sunday...

8 hours ago, vulgalour said:

I have seen a couple of folks sand back arches like that, hit with rust converter, and then repair with one of the various metal epoxies on the market.  Not as cheap as filler or fibreglass but seemed less prone to cracking and moisture ingress and a good way to deal with pinholes.  Cleaning off the rust as much as you can and slapping paint on, as you were through the summer, is the best way to get maximum mileage out of what you've got really and allows you to monitor things and slow it down rather than hiding it all under wob.  It's not as horrendous as it could be for an old car living outdoors and being used all year round in Scotland.  Give it another dose of sand paper, rust convertor, and rattlecan and eke it out for a bit longer.

There's also another potential arch donor that's closer related, though I'm not sure on availability/cost of panels.

rover-classix.jpg

They look spot on, sadly SD1 panels are just as scarce...

16 minutes ago, theshadow said:

your silencer looks solid......

It fucking should do, I only fitted the exhaust last summer! In actuality it's getting very rough around the welds, I need to wire brush it and paint it with heat resistant paint...

Link to comment
Share on other sites

Did an oil change on the Acclaim, then set about sanding, Vactaning and painting the rust...

DSC_6190.thumb.JPG.c121810f1013f1b3262dd491a73b366b.JPG

DSC_6191.thumb.JPG.f7d4005f5b36a1c05c1ad5320304be9e.JPG

DSC_6194.thumb.JPG.cba2b9aefdad29d4dfe94ae228b4bc3c.JPG

DSC_6195.thumb.JPG.3c0512e381ca6bc343fcfe8d754e34da.JPG

Bodgetastic but it should keep it looking slightly less shit for a month or two, some of the rust bubbles burst to reveal pristine steel underneath... That's the rattle can which came in the boot of the car when I bought it now empty...

DSC_6193.thumb.JPG.73ee9ee63f598e5d688edbfabad66111.JPG

I also poked a big hole underneath in the bit the anti-roll bar mounts to, which is nice...

Link to comment
Share on other sites

I've been impressed with the longevity of such repairs going back a good few years now, sand/grind back the grot, slather it with vactan and then slap rattle can paint on top. granted the winters down here are a bit less severe than up your way, but its still good stuff.

Top work. I'll put five quid on it still being as good this time next year.

Link to comment
Share on other sites

1 hour ago, Stanky said:

I've been impressed with the longevity of such repairs going back a good few years now, sand/grind back the grot, slather it with vactan and then slap rattle can paint on top. granted the winters down here are a bit less severe than up your way, but its still good stuff.

Top work. I'll put five quid on it still being as good this time next year.

Much as it looks really tidy for now, the grot looks to be coming from behind...

Unless cpn7ties put something behind the arch,  it'll  be saying hello again PDQ I'd have thought. I regularly used to wob up the large holes in the wings and A pillars of my first car (mk1 gLof). I was always pleased with how neat my P38 skills were to be fair. Always looked shite again after driving through Cornish puddles for a few weeks though. 

Link to comment
Share on other sites

It's a mix, the front wing is all rusting from the back where mud is getting trapped behind the plastic liner (it was all rotten anyway but had been filled and sanded nicely when I bought the car). The rear arches are a mix of both, whoever fiberglassed the fuck out of them has created a massive dirt trap behind the lip but a surprising amount is surface rust. I did scrape as much dirt out as I could while I was in the area.

I tend to sand/Vactan and paint the rear arches yearly with occasional touchups.

Link to comment
Share on other sites

  • 2 weeks later...
2 hours ago, captain_70s said:

Vidya.

 

I enjoyed the video very much

keep up the good work :) (I look forward to seeing the 1300 being put back together)

I will admit im a bit surprised to see the 1850 does run, I assume then it was taken off the road because of rust issues or such?

Link to comment
Share on other sites

30 minutes ago, LightBulbFun said:

its not called lieutenant dan is it? :mrgreen:

It was named "Trevor the Tenaciously Terrible Triumph" before it's legs fell off, but was usually called "The Yellow Peril"

14 minutes ago, SiC said:

Your 1850 dash plastics and wood are in much better condition than my Sprint. Mine are all cracked up in the corners. 

The dash is pretty good, the bit holding the choke and lower heater vents is broken on one side so it sits at a jaunty angle but other than that it's all intact, the door tops are all chipped though. I've found the interior to be remarkably resilient to the sun, it's been sat in a field for several years with no deterioration, I left a TDC membership card sat on the dash and it turned brown and melted so it gets hot in there...

PA267774.thumb.JPG.bca140217dace7ce1ec2c1014f2c015a.JPG

 

Quote

Well done Cap'n, and thanks for the great vid!  

I think I've only seen the green goddess in the flesh (Grantown or Buckie?), good to see the other one still lives.  

Well done Cap'n, and thanks for the great vid!  

I think I've only seen the green goddess in the flesh (Grantown or Buckie?), good to see the other one still lives.  

Aye, the 1850 was already relegated to "garden ornament" status and the 1300 was the daily runner when we met. I think it was the Buckie Summer show where it absolutely pissed it down and was freezing cold... 

Link to comment
Share on other sites

Lockdown cabin fever maybe, but I've fired up the old laptop, and found a couple of pics (just) of your afore-mentioned daily (taken by my eldest), from Buckie show...

DSC02637.thumb.JPG.9f25e6720f6c478308e4e9e35be7c115.JPG

 

Background Capn…

DSC02636.thumb.JPG.55e25fe05a3bf3c799ea6ea3884e5cdb.JPG

 

And Rosie, not long out of hibernation, in racy bumperless mode...  (the 'driver' pictured is now sixteen, learning to drive the ex-Fester-of-this-parish Mazda 323, a true shiter-in-waiting!).

2010012010_buckiecarshow012.thumb.JPG.b445c21cba0c7adbd798edd9cf8dae78.JPG

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...