Jump to content

Rusty Triumphs in Scotland - COMBUSTION, WELDING, HEAD RESTS!!! - 20/09/20


Recommended Posts

Cheers for the welcome. I've been lurking for a while, reading Vulgaour's Princess threads in particular. I nearly bought a black '77 Princess for £800 but it was money I couldn't spare at the time!

 

P8037493_1024x768.jpg

 

I'm currently living in Banff and known locally as "the loon wi' the wee yellow car", although as of the 23rd I'll be moving out of my long suffering parent's house and living a few miles up the coast in Cullen. Naturally my new cottage doesn't have a garage, good thing summer is coming...

 

I must say an early Ovlov 245 would make a fine addition to the fleet and an XJ40 might add a touch of much need class, but the local climate means most interesting stuff dissolves away before your very eyes. It's hard to even find a Pug 106 or K11 Micra that isn't utterly rotten.

That said there are a few dedicated mentalists around here, there is a matt black MGB and a tatty Midget doing the 'rounds as daily drivers and the PO of my 1850HL now alternates between a Reliant Scimitar and a Mk1 Robin. There is also an early 90s Toyota Carina or Corona estate, a Fiat Panda, a couple of Mk2 Fiestas and some Minis knocking about.

 

The funny thing about BL steel is that in certain places it is very rubbish, the doors rot in random places for seemingly no reason and the roof dents if you look at it too hard. Yet I can jump up and down on the rear wings and not cause a dent...

 

Here are a few pictures of shite related action in the north east featuring snow, makeshift radiator muffs, breakdowns and myself:

 

10945676_10206023755892161_4011828512650 20141103_161416.jpg 20140930_192451_LLS.jpg DSCN1224%20Copy.jpg

P2186244_1024x768.jpg that70sfeeling.jpg

Link to post
Share on other sites

Echo all the above comments, fantastic post and thread (and threads in that last shot).   I have always liked these Triumphs - must possess one before its too late.   You wont find this kind of thing on owners club forums....Top marks too for dressing like my last Form Master - and I left school in 1974!

Link to post
Share on other sites

Love it, this forum was created for posts like this.

W1cked Dolomites. They are great lookers and class interiors and yours look and sound just like the Dolomites you used to see when they were still reasonably common and in real banger territory. My nan ran a turd brown 1300, PGY 841R, for years. She then upgraded to a Maestro camper van. I miss the Dolomite but the whole nose cone bit and all four arches were glassfibre and filler. 

Link to post
Share on other sites

Doloshite prices are deffo' on the up. I reckon I could sell the 1850 on at the same price I bought it for despite it being a bit more knackered!

 

The 1850 was originally a north London car, explaining why the gearbox whines like a bitch, and I have masses of receipts from many of it's numerous previous owners. Passenger side floor is a bit of a patchwork quilt, rear screen surround is holed (covered with gaffer tape) and the bulkhead has a hole or two but the underside is all solid and the arches are pretty damn good aside from surface corrosion.

 

I'm happy with the condition it's in, if it was nicer I'd feel shit for exposing it to the harshness of the Scottish coastline. As long as I can keep on top of the rust and maintain it in roadworthy condition I'll be happy. It just looks so right in slightly scruffy daily driver mode, it's like it fell forwards in time from 1982:

23112014-3.jpg

 

 

 

The 1300 is more original, less welding and seems to have one giffer owner for most of it's life before going through a several owners in a short amount of time after 2001. I'd quite like to improve the condition of that one if possible, but that's a challenge.

 

I know what I want it to be one day though, it involves Lucas Square 8s, a Mk4 Spitty spec engine and an O/D gearbox... Photoshop of cosmetic changes here:
dolly-plans-pre.jpgDolly-Plans.jpg

 

As for myself and my dress sense... Well, second hand clothes are cheap (more money for cars) and I like lurid colour schemes. I even rocked a porn star moustache for a while for the proper 1970s Dolomite-ist look...

478060_10201101948450051_907822441_o.jpgmugshot.jpg

 

It also makes women cringe, so another bonus. No girlfriend = more money for cars being allowed to own shite.

Link to post
Share on other sites
  • captain_70s changed the title to Rusty Triumphs in Scotland - COMBUSTION, WELDING, HEAD RESTS!!! - 20/09/20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By davidfowler2000
      Edit: This is longer than initially anticipated.
      As some will have noticed, Mr cms206 of this parish reckons the death knell for the SVM is close with his recent purchase of a Saab. Going with the fact I still have a 100% Volvo fleet, as does Mr rml2345 of this parish I would personally say it's just diversification. Especially considering the amount of non Volvos cms206 has had these days.
      This aforementioned diversification continues a pace. Although the paperwork still needs to be done, I have some non Volvo incoming.

      Background:
      My aunt got the above pictured 205 back in about 2002 and ran it for about 3 years. By her accounts she put it in the lockup, got a Nissan Almera for whatever reason and basically put the 205 in to the long term deal with pile. It was initially SORN on the blue log book. Back when there was a theft of blue V5s at Swansea and everyone in the country got sent one of the new red ones, one never arrived for the 205 and after that it was properly forgetten about. Well she did. I've been keeping it in my mind every day since then. During a discussion over my birthday dinner a few weeks ago, she mentioned that she was going to pay the gardener she gets in to trim the trees to break in to the lockup because the padlock had rusted solid and she was desperate to use the space in the lockup. I said I'd do it free if I could assess the car. If it was completely fucked, it would have to get dragged out and put on a truck to go to the scrap heap. If I could get it moving, I would make it a project.
      Next day - 18th January:


      Time to break open the padlock then. Big screwdriver through the hasp and burst it within 3 seconds. Now to have a look at the car. It's dirty, 3 tyres are flat, one of them creased and the 4th is still at about 10psi. After FIFTEEN YEARS! A gentle rock confirms suspicions that all the wheels are locked so time to get all the wheels off and set about the brakes with a big swing press.
      The back wheels moved eventually. Judicious use the big hammer, two wheel bolts reinserted and a breaker bar as a lever got the back wheels turning. While the wheels were off I thought I'd see if they held air.
        
      All 4 tyres held 35psi. None of them appear to be cracked and the rubber is still "soft" to the scrape of a finger nail. Lack of sunlight attacking them I suppose but it'll get 4 new ones if it becomes roadworthy.
      After doing the back wheels, the front wheels quickly proved they could be a major problem. I took the calipers, pads and discs completely off the car and even with 2 wheel studs inserted and using the 3/4 drive breaker bar with an extra foot of length over the 1/2 bar, neither wheel / shaft would turn. So either the bearings had seized, the CV joints in the driveshafts had seized or something very sinister was happening inside the gearbox. By this time it was getting dark and cold so time to put it all away for another day.
      Another day - 24th January:
      Various discussions were had on the Scotoshite WhatsApp chat and the end result being Mr 320Touring of this parish agreed to come round for a shufty. He was wanting to check up on another car in a lockup only a mile or so away so it was a no brainer.
      As before, front wheels off, bar on the wheel bolts... nothing. What to do next? We need to use the car's own power to try to free off whatever is seized on the front wheels but the car is nose in to the lockup so we can't get jump leads to it. We need to drag it out but we don't have a tow rope however we manage to find what appears to be a self tightening dog collar / leash in the car and decide to cue MAXIMUM SKETCHINESS!!!

      A gentle tug from the ML of doom proved the NSF wheel is tight but not seized however the OSF is not moving. Fuck it... drag it while pushing from the front. If we need to shove it back in there's an old tyre in a pile of rubbish waiting to get uplifted by the council that can act as a cushion and the ML will do the job no bother. We also took the front brake discs off to minimise any drag from those.

      We decided to drag it out just enough to get my jump leads on to the battery. We had already taken the battery out to try it on the leads outside the car. Surprise surprise* it was so dead it had gone open circuit so there was absolutely no magic pixies flowing in to it. Luckily I had an old battery from the 740 that was the same size so that was obtained, inserted and then put to work. Time to leave it to charge for a wee bit.

      Now that we've got some electricity going from the ML in to the 205 it's time to see what will happen. Thanks to Mr Touring for providing the videos...
       
       
       
       
      At one point we were vexed by the daft French screw on battery terminals
      We were getting a bit desperate by this point. We used quite a lot of "easy start" and the amount of electricity was causing problems.
      We took a break at this point for 10 mins or so. Mainly to make sure we didn't get too frustrated but also to make sure the maximum possible amount of electricity was in the actual battery so that the leads were just there as a boost. This was clearly a good idea...
      Learning from all the antics of the last 15 mins or so we left it for another 5 mins. Using a clamp meter we let it get to the point that almost no electricity was flowing in the leads and therefore an almost complete charge and spraying the "easy start" ahead of time, results were finally had...
      YAY! MUCH ELATION! Oh and that old diesel stinks. Time to get the leads off, move the ML and let the 205 tick over for a few minutes to let the engine settle. Next we found out why the front wheels were not for turning...
      So yeah. All the CV Joints were completely solid. But anyways it was mission accomplished for the day. We got it moving and a general once over suggests that it should be easily salvageable therefore if auntie wants the space in the lockup, it's going to have to go somewhere. Time to put it back in and wrap up for the day.

      Thanks to 320 Touring in assistance. The list of work is substantial but not insurmountable. It needs - a battery, front discs, front pads, front calipers, front lower arms, front driveshafts, possibly bearings, rear drums, rear shoes, rear fitting kit, probably handbrake cables, flexi hoses all round, 4 new tyres, 3 of the 4 doors don't work properly, a water leak at the water pump but that can get done with a new cam belt, probably a thermostat, engine oil, filters all round, fresh fuel, a good clean, handbrake light, oil pressure light and a rear screenwash leak inside the tailgate.
      Oh and a sidelight bulb...

      Interim time:
      Lockup secured in Cumbernauld.
      Car transporter trailer booked for Wed 12th Feb to move it. The V70 will do the honours.
      Another bit of tinkering - 4th February
      So it has been agreed the V5 will be transferred in to my name. With an impending trailer move, I thought I'd go back and have another look at things and reassemble the front brakes. I've already installed a new battery so it can be started without the need for leads and it does so quite happily even though the fuel coming from the tank smells like paint. I drove it about in circles for 5 - 10 mins to free up the CV joints and scrape the rust off the brake discs. I also did some straight line tests pulling away in 2nd which seemed to free up the turbo actuator.
      I also found the radio code so I got that working but you'll have to take my word on it 'cos YouTube will just give me a copyright flag.
      I shall leave this one here just now. Not much will happen for a while. There will of course be the drama of the trailer move but once it's in the lockup a plan of action will need to be drawn up. A sensible first course will be, I think, to find someone who will give it a once over for MoT viability before any new parts are obtained. All the obvious stuff should be easily DIYable but I don't know what lurks underneath. Some things like the timing belt and water pump will be paid for but the rest will just get picked away at in due course.
      I also found some period souvenir parking tickets...

      ---ENDS---

    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By strangeangel
      I thought I'd start a thread for this as I'll probably end up asking all sorts of questions, given that this is my first 'proper' Citroën.
       
      So... the ground clearance lever won't go all the way to the highest setting (all others work), which is bad 'cos the book says I need it to do that in order to check the LHM level. It feels like something's seized, so I don't want to force it. Any ideas for a plan of attack would be much appreciated.
       
      Next up are the wheels. I now have a set of 205 pepperpots that have just gone off for powder coating & I need to get some tyres for them. The handbook says the car should have 165/70R14s on, the wheels came with 185/65R14 on. Any thoughts about what size I should get please? Cheers.
       
    • By Peter C
      Woke up this morning, had a little time before I had to leave the house for work, had a quick look at what’s new for sale on Retro Rides and saw an ad for a W124 200E manual, located 15 miles from home. I had no intention of buying a car today but I had to have it! I called the seller and arranged a viewing.
       
      Faults:
       
      2 x rusty front wings (TADTS)
      1 x rusty rear arch
      Needs a polish
      Tracking is out because new track rod end was fitted for MoT
      Engine has oil leak/s
       
      Good points:
       
      It’s a W124 200E!
      5 speed manual transmission
      New clutch
      Brand new MoT
      Superb MoT history
      4 x as new Continental tyres
      Last owner for 15 years, her husband before that for 4 years
      Very tidy MB-Tex interior
      Drives well
      All electrics work
       
      The dealer kindly delivered the car to my house but I managed a pez station shot on route:
       

       
      Plans:
       
      Remove front wings, cut away rust and apply plenty of wob.
      In-situ similar repair for rear arch
      Clean and polish
      Service engine
      Adjust tracking
      Leave patina and enjoy the car as it is
       
      I will update this thread once progress is made.
       

       

       

       

       

       

       

       

       

       
      Hopefully these two will become good friends.
       

    • By SiC
      Go to this link to avoid the 4 page chat on the buying process: https://autoshite.com/topic/41278-2002-renault-clio-ii-172/?do=findComment&comment=2092395
       
      Decided now is definitely the time I need to scratch this itch. I don't suppose anyone has one going or thinking of going at the moment?
      Really need to sell the Laguna before I pull the trigger but if someone is getting rid for a decent price...
×
×
  • Create New...