Jump to content

Six Cylinders Motoring Notes


Six-cylinder

Recommended Posts

35 minutes ago, Dick Longbridge said:

Pair of new tyres here. Too fruity on price I assume? 

https://www.ebay.co.uk/itm/154097232004

Same chap is selling singles at £60

https://www.ebay.co.uk/itm/BKT-TF-9090-6-00-16-3-Rib-Tyre-New/154097256972?hash=item23e0e98a0c:g:vvAAAOSwmoxfaMsg

You'd still need £20 for a tube though. Whacking another tube in might give you a bit of respite but no guarantee any frayed plies are not going to damage it

 

Doing some googlage u-pull-it have a tractors section https://www.u-pull-it.co.uk/agricultural-commercial

also http://www.tractorbreakers.com/content/large-selection-wheels-and-tyres

Might be worth contacting one of those see how much to have a tyre delivered.

Link to comment
Share on other sites

20 minutes ago, hairnet said:

It won’t match the other one though!

Link to comment
Share on other sites

4 hours ago, Six-cylinder said:

A long shot, but we need a 9.00 - 16 10 ply tyre.

Our JCB has burst a hole in the side wall of a front tyre.

New Tyres are hundreds of pounds and all we do is move a around our field and maybe the odd lap by a shiter. It is going to have to be second-hand one.

 

 

P1100708.JPG

P1100707 broad.jpg

P1100714 broad.jpg

What about second hand aircraft tyres - they have to be replaced regularly for safety reasons. I have no idea about a size match but it is the route boatyards go on their straddle carriers.

Link to comment
Share on other sites

Like Saabnut’s mentioned, the most likely source for a s/h tyre would be a collective machinery sale (most rural auctioneers will have at least one a month - in normal times that is) or somewhere that breaks old plant/agricultural machinery.  Given the current restrictions the latter is probably your best bet. 

Do you know anyone into vintage tractors etc?  They might know of likely sources - or of a local farm with dead stuff lying around.

Link to comment
Share on other sites

40 minutes ago, AnthonyG said:

Do you know anyone into vintage tractors etc?  They might know of likely sources - or of a local farm with dead stuff lying around.

We do belong to the local vintage tractor club and one of their members helps look after our yellow plant (he was the one who got the small dumper going again) so he would be a good starting point...

It may be able to repaired with a patch on the inside, though an inner tube would be a good option also. Those tyres often used an inner tube. Ours might even have one in place that has failed...

Link to comment
Share on other sites

I guess part of the issue is by the time you've paid someone with the right kit to come to the fod and pop a wheel and tyre off to inspect your only another half hours labour to just fit new ones there and then... 

Would it be cheaper to buy a whole other jcb and pinch it's wheels and scrap the rest? Or does it not scale up like that... 

Link to comment
Share on other sites

There is a second-hand tyre and tube in Bishop Auckland that looks like it would do the job and if it was local and would go to see it and buy if it looked ok.

Anybody able to check this out for me in Bishop Auckland and store until we can arrange a shitely move?

https://www.ebay.co.uk/itm/900-x-16-Tyre-JCB-Tractor-3-rib-Tyre-9-00-x-16-and-tube/133541914688?hash=item1f17b7e840:g:NJ4AAOSwz0xfgINu

Tyre for sale.jpg

Link to comment
Share on other sites

38 minutes ago, DSdriver said:

Hydraulics are already there so convert suspension to Citroen and run it on three wheels @dollywobbler

While hanging 850 Kg off the back bucket at full stretch I can get both front wheels off the ground!

If only the rear brakes that are independent worked I could steer as well!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...