Jump to content

Six Cylinders Motoring Notes - Saying goodbye to a fleet member!


Six-cylinder

Recommended Posts

It looks like you had a 330mm wheel on your mk1 MX5 - standard wheels are quite a bit bigger, around 360-370mm, and with PAS the size difference wouldn't do loads (without PAS 10mm makes a palpable difference). I can't even run a 370mm wheel comfortably, they're huge. I have a 360mm Nardi Classic instead which is just right. Also, I find mk2 to be a lot more cramped in general - much more than mk1. The leather seats sit notably higher than the fabric ones too - I fitted heated leather SVT seats to replace some cloth MK2 seats and it made a significant difference, I could immediately tell I was higher. Mk1 tombstone seats as you'd have had in a Eunos are much lower.

Put me down as a maybe for this weekend  BTW- I realised I've double booked myself, have a ticket for Capesthorne Hall car show on the Sunday, and I'm intending to fit an LSD to my MX5. I'm also waiting for a message that some Civic parts I badly need will be available - if so I'll have to go on a rather long drive to collect. They're in the west country but these aren't bits that come up often so I'm not passing them up.

Link to comment
Share on other sites

I have some old books/mags to bring, and the latest vacuum find -some Chinese PoS named a ‘Xylonic’ which has remarkably poor suction despite me not finding any blockages anywhere.

Something to Beko to investigate (and then launch into a skip, I imagine)! 

Does anyone want a couple of carpentry books? 

FAE08131-A15A-4721-9C0F-190407A9D2BA.jpeg

Bang up to date* as they are the metric versions! 

Link to comment
Share on other sites

9 minutes ago, AnthonyG said:

I have some old books/mags to bring, and the latest vacuum find -some Chinese PoS named a ‘Xylonic’ which has remarkably poor suction despite me not finding any blockages anywhere.

Something to Beko to investigate (and then launch into a skip, I imagine)! 

Does anyone want a couple of carpentry books? 

FAE08131-A15A-4721-9C0F-190407A9D2BA.jpeg

Bang up to date* as they are the metric versions! 

What happened to 1 and 2?

Link to comment
Share on other sites

1 minute ago, AnthonyG said:

No idea! These were amongst some ancient farming related books I rescued for @Mrs6C- my parents’ neighbour was chucking a load of stuff out and I intercepted them on their way to the recycling bin. 

Good. Books should never be put in the bin.

Link to comment
Share on other sites

58 minutes ago, AnthonyG said:

I have some old books/mags to bring, and the latest vacuum find -some Chinese PoS named a ‘Xylonic’ which has remarkably poor suction despite me not finding any blockages anywhere.

Something to Beko to investigate (and then launch into a skip, I imagine)! 

Does anyone want a couple of carpentry books? 

FAE08131-A15A-4721-9C0F-190407A9D2BA.jpeg

Bang up to date* as they are the metric versions! 

Sounds awful but I can't picture the name, and googling it brings up results for some sort of acid! 

Probably got a pleated paper filter that's never been cleaned. Thanks! 

Link to comment
Share on other sites

24 minutes ago, catsinthewelder said:

Helpfully* I've been talked into driving all the stuff to Scout camp on Saturday morning so once I've got the Luton back to Ludlow I'll set off on the 125.  Will try and cram the random vacuum spares I acquired yesterday into a pannier.

Just have it there for 7am and job done! 

Link to comment
Share on other sites

25 minutes ago, Chuck Buckles said:

Hoping for my first foray into the FoD as a day visitor on Saturday. Still trying to convince any of the offspring to accompany me but they don’t see old cars as a lure. 
happy to get involved helping/fixing anything. 
 

My 10 and 6yo will be there if they want someone to play with! 

(assuming their not 23 or something 😂

Link to comment
Share on other sites

The stars aren't aligning for me sadly - we now have an unexpected visitor planned that I'm not allowed to avoid, and I also need to start clearing out a load of spare parts and engines from a mate's unit as he's finally sorted out some access to them. I'm unlikely to have time to do anything fun this weekend as a result 😥

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...