beko1987 Posted November 19, 2014 Share Posted November 19, 2014 Just been and bought a can of this for the merivahttp://www.amazon.co.uk/Wynns-1831054-57680-200ml-Gasket/dp/B000Y8U9OK The destructions state to apply the bead, then reassemble lightly until the product starts squeezing out, then tighten up a bit after one hour, allow to cure for 24h then fully tighten Hbol says to apply the bead, let it cure then reassemble. Anyone had any experience with this? Wanna get it done on saturday/Sunday, so any whiter tips would be appreciated. Link to comment Share on other sites More sharing options...
KruJoe Posted November 19, 2014 Share Posted November 19, 2014 Hbol says... "HBoL" says it all. I'd follow the instructions on the product. How would Haynes know better than the manufacturer? The HBOL notes will be for another product, or general gasket gunk procedure. Link to comment Share on other sites More sharing options...
Bren Posted November 19, 2014 Share Posted November 19, 2014 Used this last week on fiesta thermostat housing. Apply bead and fit. Job done. Link to comment Share on other sites More sharing options...
beko1987 Posted November 19, 2014 Author Share Posted November 19, 2014 He he glad I questioned hbol! Glad to hear it works from someone too. Gives me some hope. Will follow the PDF I got after scanning the qr code to the letter! Link to comment Share on other sites More sharing options...
Christine Posted November 19, 2014 Share Posted November 19, 2014 Beko.. is this you ? http://www.youtube.com/watch?v=8D5adCvi-30 Link to comment Share on other sites More sharing options...
jakebullet Posted November 19, 2014 Share Posted November 19, 2014 I was gripped by that video. I'm losing it. Link to comment Share on other sites More sharing options...
Christine Posted November 19, 2014 Share Posted November 19, 2014 I don't know if you can still get oranage hermatite , but my heart used to fail if i took an engine apart , and you found orange rubber silicone ... Oh fook.... someones been in here before.. Link to comment Share on other sites More sharing options...
Morgan84 Posted November 19, 2014 Share Posted November 19, 2014 You should NEVER read the instructions until after you have done it, that is the golden rule Richard and Sigmund Fraud 2 Link to comment Share on other sites More sharing options...
Timewaster Posted November 20, 2014 Share Posted November 20, 2014 You should NEVER read the instructions until after it has gone completely tits up, that is the golden ruleEFA. beko1987 and rml2345 2 Link to comment Share on other sites More sharing options...
jonny69 Posted November 20, 2014 Share Posted November 20, 2014 Yeah, apply sealant and assemble. Don't cure first. Just make sure it's all degreased and dry with this stuff. beko1987 1 Link to comment Share on other sites More sharing options...
beko1987 Posted November 20, 2014 Author Share Posted November 20, 2014 Beko.. is this you ? Lol no, that's Roger Lang! He's Granville's_emporium on eBay, sensotronic on a few forums and ibiasic on youtube. I'm on YouTube as beko1987, coincidentally enough! And yes its mainly vacuum cleaners, with a few car vids for linking to on here! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now