Jump to content

Korean Cortina - WTF is going on with my cooling system?


mat_the_cat

Recommended Posts

Success! I tried it with the pedal rather than the Easybleed, and with a burp/spurt a load of air came out and the pedal is now firm :-)

 

post-5223-0-84194800-1499629690_thumb.jpg

 

Next job was to replace all the ball joint boots on the front suspension. I found a helpful company selling just the boots (www.balljointboots.co.uk) and certainly they feel fine - nice and stretchy. Time will tell whether they last I guess but I figure that somewhere specialising in them is likely to care more about their reputation than the average eBay seller. So I dismantled it all, gave the joints an extra squirt of grease and then put it back together. Quite a satisfying job, although annoying that I have to do it at all!

 

post-5223-0-82447100-1499629659_thumb.jpg

 

I'll have to see if anyone is interested in the Cortina handbrake cable - might as well be used by someone rather than cluttering up the place here.

Link to comment
Share on other sites

I got an email yesterday telling me that the handbrake cable I have ob order from Korea will be delivered 3 months early - beginning of March instead of end of May. Oh well, at least I'll have a spare!
 
In my random 'which bit shall I do next?' work methodology I decided to do a little paintwork at the rear. First sanded back to bare metal as much as possible, and treated with phosphoric acid to convert a couple of areas where there was slight pitting.

post-5223-0-66137200-1499629765_thumb.jpg
 
Then gave it a few coats of satin black. You may ask why I'm not doing a proper job and removing the rear lights. It's mainly because I was plagued with water leaks from them when I first got the car, and in a fit of youthful inspiration/stupidity I bonded them on with Sikaflex, and I don't have too much confidence that 30 year old brittle plastic is going to come away in one piece! I do have a set of new replacements, but I'm saving those for when I can afford a full respray.

post-5223-0-78423400-1499629784_thumb.jpg
 

And here is the finished job! I'm in two minds about the number plate - on one hand the font is 'wrong' for the car but on the other hand I actually quite like the current font! I will probably change it though as I'm not 100% sure it suits the car.

post-5223-0-04995400-1499629803_thumb.jpg

Link to comment
Share on other sites

A friend of mine has an 89 stellar on struts, in the blandish blue ever!! It drives really well and he has had it for nearly 2 years!! He also has replacement engine and gearbox !! Will post photos wen I next see it !!

Link to comment
Share on other sites

Front suspension is now sorted (apart from actually adjusting it) as I've now fitted the bolts I had made to adjust the camber:

 

post-5223-0-90777800-1499629927_thumb.jpg

 

I'd previously just assembled it with standard bolts simply to be able to roll it, so it feels like a step closer to being able to drive it.

 

Next step in my plan to avoid Operation Weldathon was sorting out the wiring loom. The existing insulation had gone brittle in the engine bay, and was falling off in places. So I completely stripped it off and replaced with non-adhesive loom tape:

 

post-5223-0-75077000-1499629941_thumb.jpg

 

So much easier to put on (and remove if needed!) than self amalgamating tape, which I'd used for patch repairs in the past.

Link to comment
Share on other sites

This week I removed the rust from the slam panel, and gave it a quick coat of silver. Unfortunately you'll have to imagine that! While the paint was drying I thought I'd better clean up the headlights. They came up pretty well after soaking in degreaser then detergent.

 

post-5223-0-06472200-1499630069_thumb.jpg

 

The wiring wasn't in great condition, and I'd previously hacked into it for some spotlights so I decided to renew it. Keeping the original loom colours because I'm sad like that :oops:

 

Something which had been bugging me was the number plates - I still prefer the narrower modern font slightly (I think the Ds and Bs look neater for example) but it was annoying me on the car as it just looked plain wrong. So I splashed out £17 on a set of new plates to replace the old 'new' ones I put on a couple of weeks back!

 

post-5223-0-91994900-1499630089_thumb.jpg

 

Then I started to put the front end back together. I replaced the old rusty bolts with either stainless or zinc plated depending on what I had, put the headlights and grille back on, and new number plate in place. Bonnet catch still needs adjustment, but I'm waiting for the paint to fully harden before I tighten down the bonnet latch bolts.

 

post-5223-0-36370000-1499630109_thumb.jpg

Link to comment
Share on other sites

These are the ones I went for, same as I put on the BX before the NEC:

http://www.ebay.co.uk/itm/161006768776

 

Decent quality - I've had some that have just been stuck on the outside of the plate and consequently peeled off within a year! DMB seem to get good mentions too.

 

I've just noticed the terrible headlight alignment in the photo! I'll have to sort that when I can get back to it next week.

Link to comment
Share on other sites

Nice plates. That's who I got the old style plates for my Marea from. Did they send a pair of new style plates also. In the same parcel??? They did with mine.

Link to comment
Share on other sites

No real progress to report, just faffing with the gearbox crossmember and rubber mounts. But this arrived in the post today!

.

post-5223-0-13958600-1395098048_thumb.jpg

 

post-5223-0-07440900-1395098141_thumb.jpg

 

post-5223-0-99692100-1395098250_thumb.jpg

 

You may be wondering why on earth I chose such a vehicle for my first car, so I'll explain. Back in the late 90s, those of my mates who had cars went for stuff like Novas, Fiesta Mk2s and the like. Ideally I was after a bigger car, and not being one to follow what was fashionable I decided I wanted something different to the norm. Top of my list was a BX, as my Dad was a keen Citroen fan and most of my late childhood had been spent in the back of one. (When I say most of my childhood, I mean that which was spent in the car...I wasn't locked up in it 24/7 or anything).

But Mk2 BXs were out of my price range, so I sadly ruled those out. Being a fan of French cars I wondered about a 205 (nobody I knew had one), but nothing suitable came forward and I would have to scratch that particular itch later in life.

Then I passed my test and the need for a set of wheels became frantic. As chance would have it, an advert for a Stellar caught my eye. I probably wouldn't have even noticed or considered it, but the family had owned one for a couple of years and while not exactly exciting, not much actually went wrong with it. Plus my Dad, being a hoarder, had quite a collection of spare parts he hadn't got round to clearing out. Insurance was surprising affordable for the size of car, as I suspect they had little data to build a young driver risk assessment on.

So, two days after passing my test I went and bought it - the rest is history!

Link to comment
Share on other sites

Gearbox mounting now sorted, so I turned my attention to the fun stuff - wiring. I'd rather be doing that than any other job on the car, although a lot of people don't seem to like it. Several of the relays had suffered in storage, so I decided to replace the lot for (hopefully!) reliability.

 

I prefer clear ones as then you can see the contacts working, and these handily come with an LED inside so you can tell if the coil trigger circuit is working correctly. Makes side of the road fault finding a lot easier.

 

post-5223-0-49790800-1499630277_thumb.jpg

(It looks as though I am powering this solely from my fingers, but there is actually a 9 V battery underneath for the photo!)

 

I put them in...

 

post-5223-0-81043000-1499630291_thumb.jpg

 

...and we have light!

 

post-5223-0-74686200-1499630300_thumb.jpg

Link to comment
Share on other sites

Bugger. I couldn't put off tackling the sills any longer, and got stuck in today.

 

Front inner wing/footwell

post-5223-0-84660300-1499630620_thumb.jpg

 

Rear wheel arch

 

post-5223-0-74183400-1499630574_thumb.jpg

 

post-5223-0-74516300-1499630597_thumb.jpg

 

Sill cut off

 

post-5223-0-62602800-1499631170_thumb.jpg

 

I've cut off the whole sill as I've got sections from a donor car, but I'll have to do a lot more fabrication and patching than I first thought. The centre section was pretty good though, so in hindsight I might have been better leaving that in place and just welding in smaller sections. Still, what's done is done!

 

I've got tomorrow off work to try and make some progress so will hopefully have some photos of new metal going in.

Link to comment
Share on other sites

Just stopped for lunch - here are a few photos of the morning's work.

 

This is what happens if you don't cut out the old rust before patching (not by me!), although to be fair to the garage, it lasted more than the expected life of the car.

post-5223-0-39082300-1499631241_thumb.jpg

 

Almost finished cutting out

post-5223-0-10429300-1499630960_thumb.jpg

 

New metal in

post-5223-0-58131700-1499631029_thumb.jpg

 

post-5223-0-31930900-1499631090_thumb.jpg

Link to comment
Share on other sites

Back home now, and only a couple of photos to show for the afternoon's efforts. A few setbacks - the wire kept sticking on the roll and my spare bottle of gas which I bought last week turned out to be empty! So the best part of an hour was wasted going to fetch that, from the same place I'd gone to this morning to stock up on cutting discs :-(

 

But I welded in repair patches to the rear end of the inner sill, and eventually put the outer sill on. It's only welded along the top edge for now, so tomorrow will be welding it all the way round and hopefully the closing panel in the rear wheel arch.

 

post-5223-0-47348400-1499631329_thumb.jpg

 

post-5223-0-76821800-1499631309_thumb.jpg

Link to comment
Share on other sites

Cheers for those Trigger :-) Just what I need to improve my mood...that and a large glass of wine.

 

After only waiting an hour at the second hospital they got the speck out with very little drama. How it got in there is a mystery, as I wore well-fiitting goggles at all times, with no vent holes. And kept my eyes closed as much as possible, being paranoid after it happening twice before! The speck had left a bit of rust staining on my eyeball which will hopefully go in time. It's ironic though, I work damned hard to try and eradicate rust on my vehicles and I end up with my own bloody eyes going rusty!

 

Anyway, I managed to get back to it and cut a patch for the end of the sill in the rear wheel arch. I've done it in several pieces to try and tie it into the existing panels for strength.

 

post-5223-0-85587400-1499631457_thumb.jpg

 

post-5223-0-05273100-1499631481_thumb.jpg

 

Then gave it all a quick coat of Zinga, and came home. Tidying up tools can wait until next week!

 

post-5223-0-77940800-1499631496_thumb.jpg

 

post-5223-0-87207900-1499631530_thumb.jpg

 

Oops...this is what the passenger seatbelt looks like now. Will have to see what I can fit in the recess, unless it happens to be shared with more common cars. Seatbelt buckles have a Ford stamp in the mouldings, so hopefully it's a standardish Ford seatbelt.

 

post-5223-0-07619100-1499631512_thumb.jpg

Link to comment
Share on other sites

  • mat_the_cat changed the title to Korean Cortina - WTF is going on with my cooling system?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By 320touring
      A long time ago, in a galaxy far away, The Burd and I went to see the Skizzer to start getting a MK1 Golf Convertible that had been off the road for 10years..
      After a couple of sessions in deepest darkest Wales , coupled with some sterling help and fettling by Skizzer himself, it was time for us to head down and bring the thing back up.
       
      This went well:
      New tyres were procured and fitted

      The in-game tank pump was pulled out and a new filter fitted

       
      Then I got in touch with my Inuit side, using brand new* magnets to undertake "tank shite" fishing


      A full check over and a couple of test drives showed it fit to play.
      We set off for sunny Oswestry, only to have both front calipers sticking after 120 miles. Some water and time to collect down saw them free off and cause no further problems.
       
      Upon getting just past Tebay, it started running rough - nicking into Todhills rest area and luzzing in 10L of fuel had it running bang on for the next 70miles before it died.
      This was the final scene on the way home.

      I got to bed at 00:45, and left it to sit until today.
    • By SiC
      So to recap. After a painfully long time (well a month) I finally bought a MGB GT.
       








       
      I've always fancied one and after seeing one at a local garage (which turned out to be a bit shit) the urge sprang up again. Anyway after a lot of searching I ended up with this. Seems pretty straight and underneath don't appear to not been welded too much. Worst point that I've found in the leaf spring mount. I'm not going to cover all the different things and stuff just yet as its already in the thread, so I shouldn't make this too long!
       
      I've not owned a car this old and never something with a carburettor. So I don't quite know what I'm doing with a lot of this, and will have plenty of questions! Part of the reason why I bought it was so I had something that I could fiddle with and learn on. As the other thread got a bit long, I thought it would be a better idea to split and start here.
    • By cobblers
      Right so! I was looking to lease an EV through the business, but completely failed due to hating new car dealers, hating touchscreens and eventually settling on a hybrid which is out of stock until mid-late 2022. 
      So I gave up and decided to get a Land rover. I failed at that too, after my mate sent me a link to the advert for this on ebay, at about 9pm. Ten minutes later I had arranged to drive down to see it the next day.

       
      I'm a glutton for punishment, and I really miss my last t25 so it was pretty inevitable that I'd buy it. It was more money than I'm used to spending on these, but overall I was pleased with the deal.
      A dawn raid by our very own @worldofceri had it delivered on Friday morning:
       






      It's a Swedish van originally, and was imported in 2006. Incredibly solid, never been painted and a fantastic "worn in" look. It's a 2.1 "DJ" engine which is pretty healthy but as usual is weeping coolant from various places, they all do that sir. A friend has a rebuilt engine on his shelf so I budgeted that into the purchase - We'll see how it goes.
      Totally original other than someone put some mega Fox/Gowesty suspension on it, proper mega bypass shocks with external reservoirs and stuff, so I reckon I can probably take it off jumps or something. I won't.
      My plans are to (after cleaning the filthy interior) to just run it about, more or less as it is. It would benefit from a set of tyres - these are worn very ridged on the fronts that makes it even more noisy and harsh to drive, and has no spare wheel.
      I've rotated the tyres so now the front ones are smoother, we'll see how I get on. I do need to source another matching wheel for a spare as these are full time 4wd so you need to keep the tyres rotated regular and within a very similar tread depth. look - there's even a sticker telling you to:

       
      I really need to get some new number plates for it! If anyone knows a place who could make some OE style ones with that font all the VW dealers seemed to use in the 1980s, that would be grand - I want some with the dealers logo putting on the bottom:

       
       
    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
    • By robinmasters
      Yes, one of those. You've seen the car before, and I've already used up my best jokes (so I'll repeat them).
       
      An epic journey, including:
       
      - THREE COUNTIES
       
      - THAT LONDON
       
      - TRAINS
       
      - SHANKS' PONY
       
      - And possibly a pastry-encased but disappointing meal
×
×
  • Create New...