Jump to content

Korean Cortina - gearbox failure


mat_the_cat

Recommended Posts

Thought I should probably start a thread, given that a few people have suggested it. For my sins, my first car was a 1985 Hyundai Stellar. Bought back in 1997, when the sun still shone, I had more hair, and the world was generally a better place.

 

This may be the earliest photo I have, I think from 1998:

 

post-5223-0-59600600-1499627345_thumb.jpg

 

Anyway, I drove everywhere in it, and clocked up over 100k miles before I was given an Alfa Romeo 75. So I took the Stellar off the road for some much needed TLC. Made some progress on it - Rebuilt all the suspension, fitted a rebuilt Cortina* rear axle, Princess 4 pot front calipers and Capri vented discs etc - before a couple of house moves and renovations put it on the back burner.

 

* before anyone says they are identical underneath, there are some differences. I fitted a replacement axle fairly early on in my ownership, only to fit that not only was the propshaft flange the wrong size, the UJ was totally different so I couldn't even fit a new yoke. Finding a company on the day before New Year's Eve who could cut off the end, weld a new UJ on and balance it wasn't too easy, especially one that was accessible by push bike!

 

Anyway, late last year I found some renewed motivation, and have been working on it when time and money permit. Here is what it looked like in October:

 

 

OMG barn find?

post-5223-0-57635800-1499627145_thumb.jpg

 

Front suspension OK at first glance...

 

post-5223-0-14203200-1499627242_thumb.jpg

 

...but it has turned out the calipers had seized (so are away being rebuilt) and all the (brand new) ball joint boots had perished:

post-5223-0-78308600-1499627162_thumb.jpg

 

 

Quite a bit of welding is needed too, but I had a setback just before Christmas when we were burgled and my welder stolen :(

 

post-5223-0-28759700-1499627100_thumb.jpg

 

Crusty roof rail

post-5223-0-45914200-1499627117_thumb.jpg

 

I've cleared some of the crap away from it now (it's not stored at mine - I'd love to own somewhere that big!) so might be able to get more photos. Currently working on the rear brakes, and disappointed to find that the shotblasted rear axle is now starting to rust after two coats of POR15 and 7 years storage under cover...

 

post-5223-0-45928200-1499627230_thumb.jpg

Link to comment
Share on other sites

It was last on the road in 2003, but I probably fitted the new joints a year or so afterwards. That was back when I bought mainly on cost...

 

At least I haven't actually torqued anything up, so will be a simple job to replace. But how do you know the quality of anything on eBay or the like? Easy to simply pay more for the same poor quality. Might use somewhere like Burton Power.

Link to comment
Share on other sites

I'll have to have a dig around for my cortina book, I think they used to assemble them under lisence, and these are loosely based on them, a sort of cortina mk 6 perhaps?

 

Great to see a stellar!!!! There used to be a j plater that went past my school bus stop back in the day, a " New York" special edition IIRC

Link to comment
Share on other sites

Restoring a Hyundai Stellar can´t be honored enough!

 

Thanks :) I dread to think of the time and money I've put into it! Probably the most expensive bit was the windscreen which had to be custom made, but fortunately not out of my own pocket. It was early 2006 and I had decided to weld up a few holes in the panel below the winscreen, using a genuine Hyundai panel I had managed to obtain. I checked with Autoglass to see if windscreens were still available and they had one in stock, so seeing as they didn't charge any extra for removing on top of the supply and fit charge, I got them to take the old one out. This was a wise move.

 

I finished the welding and arranged for them to refit the new screen. At this point we had sold the house where the car was and were living in rented accommodation some 150 miles away, so I went down for the weekend when they were due to visit. I was most pissed off to get a phone call saying they they were very sorry, but had damaged the screen when putting it on the van, and to make matters worse they, nor Hyundai had any replacements. Neither did any other glass fitter I tried. Fortunately I forcibly argued my point that as they took the screen out, they were responsible for putting one in at no extra cost to me, so they agreed to get one made. I think the cost was into four figures...

 

I didn't know that these were based on the Cortina.  How much of it is?

 

In a nutshell, all the suspension, hubs, brakes etc. The front clip is similar and swappable with a Cortina, but slightly different in that the camber is adjustable - the lower bolt has a slotted hole and an eccentric washer on each end to move the lower wishbone in or out. Maybe this was to cope with larger production tolerances than Ford?

 

They started off building Cortinas under licence, so presumably wanted to use up any inventory of parts they had. Even the gauges were Lucas designed, and made in the UK although I don't know if they are similar to Ford items.

 

post-5223-0-41195300-1499627485_thumb.jpg

 

From the 1987 model year they moved to a MacPherson strut front end, and added a Panhard rod to the rear axle, as well as updating the interior slightly.

Link to comment
Share on other sites

I think they used to assemble them under lisence, and these are loosely based on them, a sort of cortina mk 6 perhaps?

 

Sorry, didn't see this when I posted.

 

That's a early Stellar like..............never seen a B plater before.

 

According to How Many Left, the earliest left in the UK!

Link to comment
Share on other sites

I've been thinking, when I do get it back on the road, what to do about paintwork? Although the body is pretty solid there's a bit of rot around the rear wheel arches, and doors/bonnet/boot lid are all from a mint donor car I bought in 2004 which was a non matching gold colour. So leaving it unpainted will look shit.

 

I'd probably want to keep it mainly silver, but later in its life I went for the two tone look which I think it looked quite smart. Found this old photo (sorry for the quality) so you get the idea:

 

post-5223-0-09187700-1499627676_thumb.jpg

(Notice my old bike on the back of the car, together with my girlfriend (now wife) and her 205 XS. I was helping her move house, hence the trailer with bed in it!)

 

Thing is, it's normally done (as it was in my case) to hide rust - matt black covers a multitude of sins - so am having second thoughts...any opinions?

 

When looking through the old photos I also found one of the engine, looking quite clean under there so must have been not long after I bought it!

post-5223-0-02480000-1499627699_thumb.jpg

 

Link to comment
Share on other sites

My dad paid £400 for H481 HEM in 1997 (£400 for a six year old car) - must have been one of the last.

 

It wallowed a bit and was a bit "buzzy" on motorways, but altogether nice to drive.

 

I wonder what one would look like with ford badges and wheels? Maybe an aussie ford?

Link to comment
Share on other sites

This one shows what seems to be a Cortina/early Escort wheel. And better shows the two tone effect I was thinking about.

http:[email protected]<script data-cfhash='f9e31' type="text/javascript">/* */</script>/7453341456

 

Coincidentally I paid £400 for mine also in 1997, but being twice the age I think I was ripped off! I didn't think it was a bad car either, just dated dynamically for the late 80s. But in terms of reliability and equipment I couldn't really fault it. The rear reading lights were especially well used as a teenager ;-)

Back to the present day, I shotblasted and painted the petrol tank a good few years ago. The outside isn't looking too bad (just dusty)...

 

post-5223-0-08361500-1499627807_thumb.jpg

 

 

...but the inside, having no petrol in for so long, has suffered:

 

post-5223-0-20215800-1499627823_thumb.jpg

 

 

I have a cunning plan, involving electrolysis, which should hopefully clean it up inside without costing too much in time and money.

Link to comment
Share on other sites

I have a confession to make, back in my banger racing days I got through a few Stellars, they were rare even in the late '90's/early 2000's. Very tough motors but the quality of the interior was pretty dire, I remember the door cards being especially flimsy. I had heard the early ones used Cortina front suspension but never saw one so thought it was a bit of an urban legend, this is the first proper "Cortina Mk6" one i've ever seen!

 

I sold the diff out of one to a guy who raced F2 stock cars and he later found to his annoyance they were completely different to the Cortina diffs he used. I didn't offer him his money back though.

 

I'd deffo use one as a daily driver. I think the styling has aged very well!

Link to comment
Share on other sites

I've seen one J plater before in a scrapyard, but only that one.
 

On 1/15/2014 at 7:16 PM, dollywobbler said:

You managed to pull in a Hyundai Stellar? That's pretty er, stellar...

 

I think it was more despite the car! And there have been spectacular failures too - back when I lived in Sheffield it was a sunny day just before the Easter weekend. I was just becoming mates with a girl who I rather liked, so I had the great idea of trying to impress her taking her to the seaside (Bridlington) in my car. Why I thought she would be impressed with a trip to a seedy seaside town in my Grandadmobile Stellar I'm now not so sure of, but at the time it made sense.

Anyway, it was such a lovely day that we were both wearing shorts. I had the foresight to bring a pair of trousers with me, which, as we decided to stay into the evening was a wise idea as the temperature dropped. Being the chivalrous kind of guy I am, when she got cold I donated my trousers to her - still hoping I would be able to get her out of them later.

In one of the pubs we met a huge guy and his girlfriend. We got chatting and it turned out he was a bouncer at the local club (Harbour Lights?) They suggested we came along, so later that evening we did. Bearing in mind this was a strictly shirt and shoes kind of place rather than T shirt and trainers, the fact that I was still in T shirt, trainers and shorts made me feel a little self conscious. Especially as I was sober so I could drive us back afterwards! We met up with our new 'friend' and fortunately he let us in, much to the surprise and displeasure of those that were being turned away because their shoes weren't shiny enough!

After a while she explained to me that she was actually gay, and not only that she fancied the girlfriend of the bouncer we met earlier. To make matters worse, this girl was also in the club and obviously of a similar persuasion as I caught them snogging passionately. It's not a turn on when she chooses the girl instead of you...

After a while they both disappeared but I stuck around in case they were still there. I needed to give her a lift back as I couldn't just abandon her! I saw the bouncer furiously looking for someone, so I kept a low profile (not easy being the only one in shorts!)

At the end of the evening it became clear that they had both left the building, at which point I became rather nervous that the bouncer would blame me for it and give me a beating. I managed to leave via a window in the Gents and got back to my car, where I spent the night in some woodland.

Not having a sleeping bag or indeed any warm clothes I did not sleep too well, so was listening to Radio 1 early on Good Friday morning. They asked people to phone in to say if they were having a good Friday or a bad Friday - I was having a very bad Friday, being over 100 miles from home, having slept in my shorts alone on the back seat of my car, after the girl I fancied turned out to be the other way inclined and had disappeared with another girl. Whilst she was wearing my bloody trousers!

 

Link to comment
Share on other sites

Back to the car...I made up a solution of washing soda (sodium carbonate) to fill the petrol tank with, using a sacrificial anode from a piece of steel tube. Connected 12 V from a battery charger via a headlight bulb as a current limiter between the tank body and the anode, and let electrolysis begin!

 

post-5223-0-13169100-1499627925_thumb.jpg

 

And this is what had built up on the anode in an hour :shock:

 

post-5223-0-50610700-1499627951_thumb.jpg

 

After a few hours the bulb goes dim as the current reduces, so I have to take the anode out and clean it. Ideally the anode would be large in comparison with the item you're trying to remove the rust from, but I'm limited by what can fit down the neck of the tank.

Link to comment
Share on other sites

  • mat_the_cat changed the title to Korean Cortina - gearbox failure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By meshking
      About two weeks ago this vehicle was inadvertently advertised by stinkwheel on here. Having recognised this vehicle from my time as moderator on the 2cvgb forum, and having seen it change hands then, I was interested.
       
      A flurry of pm's saw a seed planted in my mind. We've got some building work to do at home - so what better way to help this than to buy a van that hadn't been on the road for 8 years?
       
      Amazingly, my wife thought it a good idea too, and we discussed the proposition with our children. A family fun bus? Why not! My 5 year old son was keen, my 9 year old daughter much less so.
       
      Anyway - wingz123 delivered the mucky beast to my drive this afternoon. Thank you very much sir, lovely to meet you!
       
      So here we are, project acadiane after a quick jetwash.

       
      Sent from my SGP621 using Tapatalk
    • By SiC
      What have I found?

      Busy day at the SiC household. With the Rover gone, it was time to pick up it's replacement. Due to an insurance timing fuck up on my part, @N Dentressangle kindly delivered this for me. 

      Just done four hours of driving going back and forth so I'm now a bit knackered. I'd usually sit in it and have a fiddle but I might end up falling asleep in there. 
    • By danthecapriman
      Thought I'd start a thread about my old Capri since it's now reached it's turn in the que to receive a bit of attention.
       
      I've actually had this since 2001, it's an early mk2, on an M reg 1974. Being an early car it's still got mk1 rear axle and single acting type rear brake set up aswell as a few other minor differences from later cars just to use up remaining mk1 parts.
      It started life here in the Portsmouth area and doesn't seem to have ventured far since.
      Originally a stardust silver 1.6 L poverty model, which means virtually sod all regarding luxuries. Basic 2 pod dash with black 'crackle' finish facia, no radio, no sun roof or vinyl roof, not even a centre console!
      When I got to it unfortunately it had suffered severely from serious rust and latterly a vandal attack, having it's door and rear quarter panel booted in.
       
      Over the next couple of years I got it sorted and a cheap re paint into roman bronze, which was a favourite colour of mine at the time. For the first year or two it seemed fine but since then things have deteriorated.
      The respray wasn't good! It's thin in places and started to micro blister in various places, worst of which is all over the bonnet. The same bodyshop also did a bit of the bodywork I hadn't finished which was also pretty poor in some places.
      It's always been a great driver and never struggles at mot time so I just kept on using it and doing nothing more than collecting parts now and again with a view to sort it one day.
      It's also gained a few non original extras over the years like a higher spec wood effect 2 pod dash facia (which I like more than the original), a short console, brown interior instead of the utterly fucked black original, 'laser' 4 spoke alloys and a few other things.
       
      Anyway, fast forward to last weekend, when I dusted it off after winter and noticed various areas of new rust coming through or older rust that's gotten worse. So the decision was made to go for a professional resto job now before I end up finding something else to distract me (like big american cars with knackered engines!).
       
      1974 Ford Capri BBK244M by Dan Clark, on Flickr
      Here it is as it currently stands. Looks ok from a distance but the reality is very rough around the edges and the paint is so bad in places it's becoming embarrassing!
      IMG_0509 by Dan Clark, on Flickr
      And the interior which I'll be re trimming into black leather at some point after the body works done.
       
      It's been taken to the same place that did my Mercury's engine rebuild, since they did such a good job and they seem a good professional bunch.
      I dropped it off Monday afternoon for a thorough check over to build up a list of work and get a rough quote.
      Today I heard back from them.
      Good news so far, I suppose. It is as solid where it counts as I thought it was. Chassis is fine, original strut tops fine, most of the back end is solid and just needs a few repairs here and there.
      The worst is the bottom of the windscreen surround due to the wrong seal being used and then fitted badly causing leaks. Inner sill to A post bottom corner very scabby, front wings pretty crap, and various paint defects etc.
      The engine is fine, compression all in tolerances. Suspension needs work, and some brake pipes are getting quite rusty. So far so good and no surprises!
      There's still more checking to do over the next few days but it sounds alright so far.
      This work should be made a bit easier by having a lot of panels and parts to fix things already. The big find being a new unused pair of front wings. Very hard to find mk2 items now, though I did have to pay for them!
       
       
      The plan here is to make the car solid, reliable and good looking. I'm not making a show car or going too mad as that stuffs not my thing and if it was I'd start with a better more original car.
      Some of the later add ons will be ditched like the mk3 boot spoiler that I hate! And return it to more standard looking mk2 as it should be. No go faster mods or anything like that.
      The main priority is to get the body sorted and painted properly (engine out job and everything) then maybe a bit of mechanical work as needed.
      The original idea was to re paint back into original stardust silver, but having thought about it I'm leaning more towards another favourite Ford colour of the era, Miami blue metallic, which is a lovely colour! Any opinions?
       
      This will be another expensive project but not one I think I could do at home on the drive and do justice to, so I'd prefer to farm it out and get it right this time. It also means I can carry on working on my Transit and Granada at home without another distraction!
      For anyone whose interested I'll try to update this now and then as things progress. I'll also try to get the old pics of the car from when I got it so you can see how rusty it was! Bear in mind though that I paid £100 for this car in 2001 with MOT and tax! Try doing that now.
      I'm sure this is going to be worth the expense, not that I'm even considering selling it of course but I've had it so long I kind of feel obligated to do right by the car in a weird way!
    • By mat_the_cat
      A mate of mine at work has just restored this, and now it's (just about) finished, is selling it. He wants what seems like a fair price for it, and it might be my only chance to indulge a boyhood dream before values climb too high. And hopefully I shouldn't lose out!
      Is there anyone around who knows the values they actually sell for? Obviously I've looked at adverts and completed eBay listings, but don't know if they reflect reality!





    • By Zelandeth
      Well I've been meaning to sign up here in forever, but kept forgetting. Thanks to someone over on another forum I frequent poking me about it recently the subject was forced back into my very brief attention span for long enough to get me to act on the instruction.

      I figure that my little varied fleet might bring you lot some amusement...

      So...we've got:

      1993 Lada Riva 1.5E Estate (now fuel injected, as I reckon the later cars should have been from the factory...).
      1989 Saab 900i Automatic.
      1987 Skoda 120LX 21st Anniversary Special Edition.
      1985 Sinclair C5.
      2009 Peugeot 107 Verve.

      Now getting the photos together has taken me far longer than I'd expected...so you're gonna get a couple of photos of each car for now, and I'll come back with some more information tomorrow when I've got a bit more time...

      Firstly...The Lada. Before anyone asks - in response to the single question I get asked about this car: No, it is not for sale. Took me 13 years and my father's inheritance to find the thing.


      Yes, it's got the usual rusty wings...Hoping that will be resolved in the next couple of months.

       






      Next, a proper old Saab. One of the very last 8 valve cars apparently, and all the better for it. I've driven two 16v autos and they were horrible - the auto box works sooooo much better with the torque curve of the 8 valve engine. Just wish it had an overdrive for motorway cruising...









      Next up a *real* Skoda...back when they put the engine where it belongs, right out the back. In the best possible colour of course...eye-searingly bright orange.







      Seat covers have been added since that photo was taken as it suffers from the usual rotting seat cloth problem that affects virtually all Estelles.

      Then we have possibly the world's scruffiest Sinclair C5...



      Realised when looking for this that I really need to get some more photos of the thing...I use it often enough after all! We have a dog who's half husky, so this is a really good way of getting him some exercise.

      Finally - again, I really need to take more photos of - we have the little Pug 107.



      Included for the sake of variety even if it's a bit mainstream! First (and probably to be the only) new car I've bought, and has been a cracking little motor and has asked for very little in return for putting up with nearly three years of Oxford-Milton Keynes commuter traffic, before finally escaping that fate when my housemate moved to a new job. Now it doesn't do many miles and is my default car for "when I've managed to break everything else."

      I'll fill in some more details tomorrow - I warn you though that I do tend to ramble...
×
×
  • Create New...