Jump to content

Autoshites *official* WANTED/OFFERED thread...


Lord Sterling

Recommended Posts

Set of 4 17" Wolfrace Alloys and Tyres (just legal). They are 4 stud and came off my mates Ford Focus which was an 02 plate. He dumped them at mine before sodding off to Oz and I've not had time to shift them since. However I would'nt mind them gone now as we have installed a shed where they sat.

 

£60 for an autoshitter.

 

Collection from Sandbach (j 17 M6) Please

 

IMG00737-20131003-1152.jpg

Link to comment
Share on other sites

Anybody want any Nisssan Terrano bits? It's a 1997 'P' LWB Touring SE in dark metallic green over silver, front wings are probably past it, has no gearbox (used to resurrect mine) or wheels (sold already), and the interior is dirty, albeit still all there.

It's the intercooled TD27i lump which has covered and indicated 101k, which still has all its ancilliaries attatched.

If you want anything let me know, the car is in Norwich

Link to comment
Share on other sites

Anybody want any Nisssan Terrano bits? It's a 1997 'P' LWB Touring SE in dark metallic green over silver, front wings are probably past it, has no gearbox (used to resurrect mine) or wheels (sold already), and the interior is dirty, albeit still all there.

It's the intercooled TD27i lump which has covered and indicated 101k, which still has all its ancillaries attached.

If you want anything let me know, the car is in Norwich

Might need some bits in the next week or so as one of my customers is due the mot. I know it needs a bulb holder for the reverse light but that might not be important depending how the rest of it gets on.

Link to comment
Share on other sites

WANTED:

14" Fiat/Lancia/Alfa (4x98) wheels with tyres, not too expensive pls.

or

4x 175/70/14 tyres

 

OFFERED

15" Alfa alloys with 195/55/15 budget tyres with decent tread - £80.

I am willing to swap the Alfa wheels for 14" Fiat/Alfa/Lancia wheels, as long as they have usable tyres on.

 

post-4715-0-97245400-1391423580_thumb.jpg

 

I bought the Alfa wheels to put on my Beta, however I would need to fit 15mm spacers all round to get the wheels to clear the brakes/suspension, which would make them protrude from the arches, and look crap.

Link to comment
Share on other sites

WANTED:

Used Wooden or metal garage/workshop bench, any size or condition considered but needs to be sturdy so I can hammer the shit out of seized chod parts!

 

I can swap for Stella Artois, an old bottle of mulled wine and a selection of (play-worn) mucky playing cards.

 

Based in North Lincolnshire but have an estate and trailer to collect, travel down to Leicester a fair bit too.

 

PM me if you have owt and we can sort summat....Cheers chaps 

Link to comment
Share on other sites

Following a MEGA SHED CLEAROUT this morning, the following bits are for sale :

  • Set of four Rover R8 steel wheels, 5.5x14 shod with 175/65 tyres. The wheels are straight with only some surface rust. Tyres may scrape through an MoT but I wouldn't use them on the road. £15 ?
  • Towsure towbar for Merc W124 saloon/estate. This has never been fitted, hence doesn't come with towball or electrics. £20 ?
  • OEM towbar for Volvo 700/900. Fairly scruffy but useable. Comes with towball but no electrics. £15 ?
  • Pair of MX5 seats, those are out of a late UK model and have separate headrests. Driver's seat is worn in the usual MX5 places, passenger seat is good apart from a small cigarette burn at the base. No runners. £30 ?

All items are bulky and heavy, hence collection only from Andover, North Hants.

Link to comment
Share on other sites

Alright, theres 4 old classroom desks from our art dept,  a good 40 yrs old and splattered with paint, much more solid than the new ones but for a proper bench you would need to brace the legs or screw them to the wall. I could do with them chucking out pronto 70cm high, 80cm deep, 2 are 120cm long and the other 2 are 150cm long.

Free to collector

 

There are some proper woodwork benches out at the store which are probably surplus, about 6' x 4' from memory with vices bolted on.   I think we'll end up clearing the store at some point but fuck knows when.  A decent offer might secure one sooner though and if any of you guys are collecting then I could meet you on a weekend

 

I've got a battered 4 drawer filing cabinet on the free list too

Link to comment
Share on other sites

Probably very little interest in such things on here, but does any one want an indoor/garage car cover? It is medium sized (fits small saloon or sports car).

Supposedly dust proof and breathable fabric.

NOT suitable for outdoor use. Basically a fitted cover/ dust sheet. Comes with Hagetery Insurance carry bag as supplied. Bought for me as a present by well intentioned relative. Not needed TBH.

£10?

Link to comment
Share on other sites

Does anyone want to buy these original 80's Daihatsu wheeltrims from a Charade CX? I thought the embossed text said 'Daihatsu', and not 'Charade'.

I also bought them thinking they were 12", but they are 13". Still nice, and very 80's. Just want £20. Think they'd look nice with the inserts sprayed black again. Or even red!

 

Or green!

 

$_57.JPG

 

Or any colour you would like!

Link to comment
Share on other sites

OK!

camera clear out!

 

Being a compulsive shit buyer my camera collection has slightly bloomed recently and with the house move it has been 'suggested' that I 'might' like to 'move them on'.

 

first up you capitalist pigs is my collection of Soviet Chod Rangefinders

 

Kiev 3 from 1954 including one of those rare-as-you-like soviet leica/contax film spools. contax copy, Carl Zeiss  Lens, nice and clear/mould free with older contax mount £25, good working order, leather case

 

Fed 4 leica copy with Jupiter Lens, nice and clear, range finder works well no issues. This one has double plus Daley Thompson shite points with 1980 Moscow olympic special edition! £20, leather case

 

Zorki 3 - the rare one, 1954 one of the earliest of the last edition of the Zorki 3 before it went all ugly and range finderie. well used but all working, nice clear lens, wonderful patina on case. leather case GR9 4 PHOTOING RELATIVS BEFORE THEY GET PURGED £90

 

all the above, add £3.50 for post

 

1990's 35mm Zeiss Planar 1.7/50 Lens with contax/Yaschica mount and auto link, excellent condition, shitter's price £200 + £10 courier

 

1990's 35mm  Zeiss Planar 1.70/50 Lens with contax/Yaschica mount, no auto link, excellent condition shitter's price £150 + £10 courier

 

Both these lenses are superb and take the most fantastic pictures, the depth of field is such that I used them for many years after we got our first Digital SLR because the quality is in a different league. I paid £390 for the auto link 4 years ago. Professional optics, make your Nikon D series SLR photo look like a caveman did it on the wall of a cave

 

Contax 167M SLRcamera body, needs new rear plate release, full working well used order shitter's price £50 + £5 post

 

contax TLA30 Flash Unit, excellent working order £30 + £3 post

 

1990's Tamron zoom lens 85-210 with contax/yaschica mount, no auto link excellent condition £30 + £5 post

 

1970's Pentax MX 35mm SLR camera with 50mm lens. One of the first semi/pro compact cameras by Pentax was the M series, the MX representing one of the more advanced of the series, these small, well made and very tough cameras were, with the Nikon of the time, the war photographer's weapon of choice. Pentax M series are in high demand today from art colleges and students as they are superb cameras on which to 'learn' the basics of photography without the flummery and electronics of later SLRs or this digital chicanery. GR9 4 FORGING PASSPORT PHOTOS IN FRENCH EMBASSY IN CAMBODIA WHEN UR JULIAN SANDS

Link to comment
Share on other sites

Wanted

 

Hi, I'm after a set of front struts for a mk1 golf gti-not bothered about spring/damper condition as have new to go on

 

However, I need the retaining collar on the damper to be in good condition so I can remove it to fit the new one(living in Scotland, the rust is bad on current set)

 

I'll likely need postage (happy to arrange my own courier-for whenever suits you) unless you are fairly local

 

Please let me know what you have,

 

Cheers

Link to comment
Share on other sites

Got a couple of things to get shot of here in wet and wild Yeovil:

 

Rear Bumper MG ZT Tourer in Black- COuple of scratches nothing major, no cracks and no trim inserts.

 

Tow bar for a Honda Accord. Came off of a V plate hatch back. Think all the bolts are there!

 

Back Box of the exhaust for a 1.8 Honda Accord. 18 months old when cut off. Cut it off just past the bracket for the mid section.

 

These have all moved house/ garage a couple of times so I hope my descriptions are reasonable.

 

I won't post ( too fxxking big or heavy!!). I don't want any money ( however I want them to be used not put on flea bay etc and sold) for them but just make a reasonable donation to Help for Heroes.

 

Anybody interested just pm me.

Link to comment
Share on other sites

WANTED:

 

A pair of 10" or 12" bog standard proper Mini steelies with half decent tyres if possible.

 

Ideally in London, Herts or Essex - although happy to pay for courier if further afield.

 

Just got a trailer but it is minus da wheelz.

 

Cheers

 

Ken

I have one 12" one spare, it's in Bexley.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...