Jump to content
vulgalour

1980 Austin Princess

Recommended Posts

So many broken picture links!  I'll fix it one day.
 
I feel I can finally unlurk properly now that I have something worthy of Autoshite to post about.

Day One
35034092663_ef6ec575fe_z.jpg20120217-04 by Angyl Roper, on Flickr
35711947901_2bd7c85f71_z.jpg20120217-07 by Angyl Roper, on Flickr

35034092563_d7589b960e_z.jpg20120217-08 by Angyl Roper, on Flickr

In the cold light of Day Two
35711947701_9a59c03357_z.jpg20120218-01 by Angyl Roper, on Flickr

Came with some great features.
35034092313_7223f7dd8c_z.jpg20120218-24 by Angyl Roper, on Flickr

35034091893_f2b6432cec_z.jpg20120218-38 by Angyl Roper, on Flickr

35711947471_5d256e36eb_z.jpg20120218-45 by Angyl Roper, on Flickr

The best thing about vinyl is that you *can* scrub it clean and with this old boat that was needed; everything was sticky and left a black residue on the hands. I've only been able to bring myself to spend an hour on the driver's door, the rest will have to wait for now.
35843773905_0a007722df_z.jpg20120220-04 by Angyl Roper, on Flickr

35003627524_62c565ccd2_z.jpg20120220-05 by Angyl Roper, on Flickr

Doesn't look as big as it feels, weirdly.
35034091603_3dea003810_z.jpg20120220-25 by Angyl Roper, on Flickr

This is going to be my new daily in a few months, just got to get through a lot of cleaning and a bit of fettling. She's actually not that bad overall and only cost me £450 (plus £25 day insurance to collect her).

The problems?
>Quite a few rust blebs, but nothing serious or structural
>Handbrake needs adjusting, I have to chock the wheels when parked on the drive
>Driver's door window doesn't work
>Probably decades of hand grease and silicone spray, built up in alternating layers. The engine bay is cleaner than the cabin.
>Bonnet rams don't hold up the bonnet.
>Neither do the boot rams.
>Garage fitted electric fuel pump has no supressor, interferes with the LW/MW radio
>PYE tape deck needs new belts, music played on it sounds like it's underwater
>Bad previous respray with water contamination.

But you know what, none of that matters. She's supremely comfortable and with some TLC over the summer should be in fine fettle. I'm not sure whether or not the people that look with face agog and jaw slack as I drive past are impressed, worried or amazed that a beige Princess with a brown roof still exists and is out on the road with someone a long way from pensionable age driving it.

Share this post


Link to post
Share on other sites

Well, to find out the whole gory story, there's a build thread over on Retrorides here: http://retrorides.proboards.com/index.c ... ead=123005

 

I'll add updates here too from now on so you can watch the progress. Having a break from the old girl today, the weather is pretty nasty here so I'm staying indoors and drinking lots of tea.

 

In a nutshell, I went from wanting a Princess to buying one in a week, via a series of surprising events. Proved to me that putting a note through the door of the house that has a dirty old car on the driveway is the way to buy in future. Keeping it almost as BL intended, there's very little I want to change on this car, I just want to get her working and looking better than factory.

Share this post


Link to post
Share on other sites

But you know what, none of that matters.

 

Absolutely the right attitude. People(especially those working in the council planning departments) never consider that old houses have character because they have had 100+ years of bodging maintenance and adaption to latest trends. Its the same with cars but on a lesser timescale.

 

Welcome to Autoshite by the way, I think your car is fantastic, as archetypically English as my DS is French if you know what I mean.

Share this post


Link to post
Share on other sites

Hello and welcome, I've been following your story over on the blue forum and was impressed with how quickly you went for inquiring about them to atually buying one, no pissing about there!

 

I remember a lad from school's dad having one of those you bloody years and years in that colour as well.

Share this post


Link to post
Share on other sites
I'm not sure whether or not the people that look with face agog and jaw slack as I drive past are impressed, worried or amazed

 

I'm sure they're impressed. Some of them for the right reasons, even. Anyway, we're impressed and you're impressed and that's what counts. Welcome to AS.

 

(And if a beige Princess is the required qualification for membership now, I may have to demote myself back down to lurker :oops: )

Share this post


Link to post
Share on other sites

Great car you've got there Volksy. Surprisingly there doesnt seem to be any around here in Brum (Apart from an A-reg facelift I snapped a last year) I thought there would at least be some sort of enthusiam for it. Oh well, hey ho.

Share this post


Link to post
Share on other sites

Ace! 8)

I love Princesses, and had a '79 2200HLS myself for a year or so not long after I passed my test. (Never really did 'yoof' motors!)

They're such a fantastic shape with some beautiful detailing that I just can't understand why they're not revered as a design classic. No doubt the BL badge does them no favours, but it didn't put me off.

They have the sexiest wheel arches on a car ever IMO. :P

Share this post


Link to post
Share on other sites

The Austin Princess; a great way to make friends and influence people! Who knew?

 

Thanks for the warm welcome folks, it encouraged me to get out in the wind and rain and do some work anyway, even if all the work was done inside the car. I'm just sorting through the pics and writing up the day's exploits and I'll update you in a moment.

Share this post


Link to post
Share on other sites

Just lately I can't seem to help myself for working on the Princess. I feel very enthused about it, possibly because the jobs aren't quite as involved as with the Polo and it's mostly just cleaning.

Following on from yesterday where the two front outer bolts on the front seats were seized and I was worried that the captive nuts had gone nasty, I've had some progress. Last thing yesterday I doused the bolts with a good amount of WD40 in the hope it would soak in overnight and magically free them off.

After tightening and loosening the driver's side bolt a few times with the 6mm allen key it came loose easily and the seat was out, hurrah! The passenger side required some persuasion with a multipurpose tool, a 6mm allen key and a few swear words but it too came free eventually. No apparent damage, just the end of the bolts had got a bit rusty. The bolts are getting copper greased before going back in those holes, I'm likely going to be taking these out again when I can afford a new carpet and I don't want a two day ballache of a job again.
35843975685_793386d0a7_z.jpg20120222-01 by Angyl Roper, on Flickr

I then remembered to get a snap of the ICE (lol). PYE tape deck fastened to the right of the steering column and wired to the speakers on the parcel shelf. It needs new belts.
35843977125_883dc1c918_z.jpg20120222-02 by Angyl Roper, on Flickr

35712108621_19b97c3db0_z.jpg20120222-03 by Angyl Roper, on Flickr

I don't know what make these are. I may be keeping them but putting new cones in, the passenger side speaker doesn't work very well.
35843976835_8fec5eeb02_z.jpg20120222-04 by Angyl Roper, on Flickr

Front seats out, it was time to remove the carpet. This meant removing the centre consoles.
35712107951_06204408ac_z.jpg20120222-05 by Angyl Roper, on Flickr

Following the book instructions, as I couldn't see any fastenings and didn't want to risk breaking difficult to source parts, I pried off the trim from the rear console.
35843976645_722404b300_z.jpg20120222-06 by Angyl Roper, on Flickr

This then exposes the four screws, which are the longest screws in the world, that hold the console in place.

35712105751_1ddf838ff9_z.jpg20120222-07 by Angyl Roper, on Flickr

Two at the back obscured by the seat belt stalks.
35843976555_b6f30c2bf5_z.jpg20120222-08 by Angyl Roper, on Flickr

Two at the front, obscured by the console itself. Great job BL.
35843976435_bdfac3270d_z.jpg20120222-09 by Angyl Roper, on Flickr

Then the front console to remove. Couldn't find anything for this in the book but I found three screws. One screw is at the gear lever side, right at the bottom.
35843976405_3b32f4e0b4_z.jpg20120222-10 by Angyl Roper, on Flickr

The other two are at each side, hidden crudely with two carpet tabs.
35843976265_f20f30954b_z.jpg20120222-11 by Angyl Roper, on Flickr

All free, carpet could come out... well the front half could come out. The back half is held in still with the seatbelt mounting bracket and those bolts have also seized so a dose of WD40 and leave them until tomorrow when I'll have another crack at them.
35712106541_b871de4c69_z.jpg20120222-12 by Angyl Roper, on Flickr

Front carpet and soundproofing lifted to find that unsurprisingly, the driver's side footwell has a patch welded in. The work has been done well and looks solid, but I'll clean it up, rust treat and repaint it before refitting everything just to keep it solid.
35843975655_0970040576_z.jpg20120222-13 by Angyl Roper, on Flickr

Passenger side looks unmolested, which is good. A couple of tiny blebs I'll deal with, but overall nothing of concern.
35843975975_e246fbd372_z.jpg20120222-14 by Angyl Roper, on Flickr

When we picked up the seats we'd put out of the way in the kitchen to put them back in the car, some money fell out. Only one of the old 10 pence pieces, sadly, from 1977.
35712106151_2c5b726905_z.jpg20120222-15 by Angyl Roper, on Flickr

I was disappointed to find that there is still no sign of the cassette for this case that was on the parcel shelf.
35456039360_5b51ed61b4_z.jpg20120222-16 by Angyl Roper, on Flickr

I guess tomorrow I'll be cleaning again.

Share this post


Link to post
Share on other sites
Super looking wedge you have there.

 

If you want a BL owners handbook for the price of postage (about a quid) let me know.

 

Thank you, and yes please, I have very little history before '97 for this car, much less wonderful stuff like BL paperwork for her.

Share this post


Link to post
Share on other sites
Super looking wedge you have there.

 

If you want a BL owners handbook for the price of postage (about a quid) let me know.

 

Thank you, and yes please, I have very little history before '97 for this car, much less wonderful stuff like BL paperwork for her.

 

Mr Volksangyl, you have a PM.

Share this post


Link to post
Share on other sites

This one just has the 1700 O series engine with manual box, but that's plenty for me, I'm not much of a speed freak really. I am a supremely lucky chap and I do feel ever so slightly guilty for paying so little, right up until the point I touch anything inside that hasn't been cleaned yet.

Share this post


Link to post
Share on other sites

Stunning. That's Champagne beige iirc...?

 

I have a real soft spot for these as my dear old Dad had one as a company car back in late 1980 - it was a 1979 T 1700HL in Denim blue metallic and it had already done 70'000 hard miles including towing trailers of garage equipment accross Europe. It was - battery and clutch apart - totally reliable. There were many good things about it but one of the better features was the ashtray on the right hand side - for Rothmans Kings like him, that was only a good thing. Also the Unipart BL radio which had unique knob spacings so other radios wouldn't fit. Good old BL. He found that with an extra 5 psi in the tyres, the handling was transformed. They always seemed to be a more robust car than the other BL chod, and indeed the Cortina. The body was surprisingly rot resistant and apart from oil use, the Oh! Series engine was a tough old bastard. You'd have the odd leaky PAS rack and a faulty displacer, but they were a good strong car and superb for towing. I'd love a black 2200HLS.

 

Lovely car you've got, but I'd ditch the Ambastardor type steering wheel and fit a traditional Princess wheel - more in keeping with the 70's feel.

Share this post


Link to post
Share on other sites

Cleaning is ok, done it myself; all you really need is elbow grease. More technical stuff, like welding and serious mechanicery, costs money, so dig in and then enjoy the fruits of your labour. We are, you must realise, all jealous... :D

Share this post


Link to post
Share on other sites

@Rev. Bluejeans: That Ambassador wheel is... well it lets the side down somewhat. When we picked the car up there was so much filth on the wheel it looked like lovely smooth plastic but once we'd cleaned it the whole thing is crazed and cracked. Not only that, it's a horrible chunky thing and I hate it, I've not seen any Princess wheels proper up for grabs yet, but a brown one is high on the want list. The clutch might need doing on this one, and according to the book it's very nearly an engine out job, which I'm not looking forward to. I wouldn't be surprised if in the 71k miles she's done, she's never had a clutch replacement. Looking at the skimpy paperwork, I reckon the first owner used the car to commute and haul family and from '97 it was used as a show car, covering a mere 7k in 15 years, which is insulting for such a capable beast, but also what's probably saved it for me. I have no power steering, it's saving me a fortune on gym fees.

 

@Eddy: If it helps, I still look out the window and wonder who's parked her on my drive, I can't quite believe I have a Princess either, especially such a good un!

Share this post


Link to post
Share on other sites

The Princess 2 wheels were leather bound and were all black, with a grained vinyl centre piece - very late ones had the horrid corporate Austin Morris badge. Princess 1's had the wheel with a different centre - same odd shape but with the wonderful BL logo and, one posh ones, a strip of real Formica.

Unlike the 1800 Landcrab, you can do the clutch with the engine in on the 1700/2000. These had a strange set up with the primary and idler gears, like a Mini/Maxi but arse about face.

Share this post


Link to post
Share on other sites
The Princess 2 wheels were leather bound and were all black, with a grained vinyl centre piece - very late ones had the horrid corporate Austin Morris badge. Princess 1's had the wheel with a different centre - same odd shape but with the wonderful BL logo and, one posh ones, a strip of real Formica.

Unlike the 1800 Landcrab, you can do the clutch with the engine in on the 1700/2000. These had a strange set up with the primary and idler gears, like a Mini/Maxi but arse about face.

 

I shall have to reconsult the book, it's likely it'll be lying to me or I'm reading about the wrong engine - it covers all the engines - and I'm sure I've seen a brown Princess wheel, unless it was a picture that just made it look brown, like most pictures made things look brown in the 70s. Mmmm... genuine Formica.

Share this post


Link to post
Share on other sites
He found that with an extra 5 psi in the tyres, the handling was transformed.

I remember reading somewhere that the recommended tyre pressures for Princesses were lower than on most cars as the tyres were intended to be an integral part of the suspension system, so pumping up the tyres improved the handling but shortened the life of the Hydragas.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By sutty2006
      So I bought this omega in 2015/16 with the intention of doing a banger rally to Benidorm. The engine had a horrible grinding noise and the auto box was lazy. I spent £100 buying it, £50 on oil and filter for the gearbox and sold it for £200. I sold it to a distant mate who put another 2.5 Diesel engine in and put it back on the road. He’s been using it as a daily ever since. He bought a later omega in better condition with the same engine and offered me this one back or scrap it. £50 exchanged palms and the Omega is now back on my driveway. Epic. 
      So the plan is this. I’m going to let it sit on my drive for a while, as next year I’m going to do another Banger rally. Cool. Then on return, the engine and Auto gearbox will be transplanted into my diesel Carlton. I hate having a manual gearbox so a diesel auto carlton is a great idea. Whether it happens or not is another thing. But I’ll cross that bridge when I get to it. 

    • By BoggyMires
      Now in my mucky hands is this S Type Mondeo Lincoln. It's not like a Mondeo Lincoln  though, just uses some of the bits as it's from a time when jaguar was experiencing some 'technical' issues. 
      It has managed to hang onto the feel of a premium car but for the use of cost saving interior plastics made from the same gear that land Rover used in the discovery 2 of the same era, I know, I have one of those too! That has some BMW switches in it though.
       
      This jaag was cheap. Why did I buy it? All I wanted really was a small convertible for the summer to smoke around in, this is the polar opposite. 
      The price was good but these cars are without their expensive issues. I liked the body. It's virtually rust free, a freak of nature and it had a set of premium tyres on it which suggested it's had some money chucked at it.
       
      That's all I wanted really from it. The bolt on stuff and mechanicals are fairly easy to sort out, plus I can upgrade as I feel fit.
       
      Today I've been bonding with this machine. It's got to beat the 3 series I have as a good daily or it's out. It's going to be a tall order, the 318 is bionic!
       
      I have many miles to do in the next few months, I need a motorway cruiser auto. The odd jaunt for a few hundred miles is the 318's and my clutch legs limit!
       
      Now, this car has been owned previously by a few members on here, the work it requires is because it is a cheap car and 20 years old and has a jaguar badge on it. There are a few issues with it.
       
      As said, it has to be put into immediate service. I've owned it 2 days and it's already done over 300 miles, and will do all that again tomorrow! So let's get started!
       
      After about 100 miles yesterday, I reversed it for the first time in my ownership and when braking the noise was alarming! Had a look and the outer rear brake pad was metal on the disc. I only had another 60 miles to go!
      A phone call on the move saw a set in stock back home to be picked up. Sweet.
       
      That was yesterday, I've got a day now to change the rear pads and sort out the dropped headlamps with a couple of screws... A couple of hours it'll be Sorted... He says...
       
      WIND BACK CALIPERS! Yes, they are. My special tool? Sorry? What? No tool?
      Well, I cobbled together a bar and a pair of molies but Christ, that was messing about! I wanted to secure the caliper to the mounting to hold it still but the sliders internal thread was cross threaded on both sliders, so I had to tap them out first. It worked but not without a fight. Then my neighbour came over to have a nose at the new aquisition... Him: Morning, how you getting on"?, Me: "Shit, you haven't got a brake caliper tool have you"? Him: "Yeah, I'll go get it". 
       
      LIFESAVER!!!
       

       
      Sticky slider syndrome ^
       

       
      Fully padded up ^
       
      I took a look around under there, it's nearly all shot. Most ball joints are exposed to the elements so all need replacing but not before a decent jet wash.
       

       

       
      There's little play in the joints so all that goes on the list of parts and graft! Wheels on, I loosened and torqued all the wheel nuts around the car and done the Tyre pressures, we were running soft all round.
       
      Next was the front lights. A screw mod can be done but I took the back off the units and they were, well toast. Nothing much holding the inner lenses still at all. There was only one thing for it...
       

       
      I had readied myself for this. I got hold of a replacement lamp mounting kit with all parts made from nylon. This involved dissecting the lamp which was tough! The mounts that came out, or what was left of them were weaker than Jacobs crackers and just crumbled. To get the bumper off, the plastic under tray bolts were all seized so I had to grind them off. More knackered parts were seen. The auto box cooler has shed most of it's cooling fins, the radiator is sweating and the power steering is hemorrhaging fluid on full lock. There's also a coolant leak at the thermostat housing and there's a high pitch whine at 1000 RPM which turns out to be the alternator. More for the list.
      Still, back to the lights. I need to be able to see tonight so I took a level off the tourings lights and marked on to a wheely bin, these are pretty spot on. Then I can use the bin for the Jaags lights and I won't be far off 
       

       
      Going back together nicely it was a good time to run some tcut over the faded lenses. They need a more intense compound and a machine but will do for now.
       

       
      Looks smart yo!
       
      Then it got dark...
       

       
      I then drove 120 miles in it and drove it like it was stolen. It had it, all of it! Slight brake judder at 90 and I couldn't get the alignment done as I had no time (see above pics)
       
      So now we have to price up priorities like the knackered joints on the rear and a full service, two Goodyears and investigate the power steering leak which, I'll hazard a guess at the rack seals are fubard. 
       
      So in summary, I got a bargain barge that has it's fair share of issues, the interior quality is a bit shocking in places but when the hammer is down, none of this matters! It fits in, it can be a proper giffer cruiser with radio two on at 30mph but it'll turn into a bruiser with some oldskool hardcore at a tonne. It's come to a good home.
    • By strangeangel
      I thought I'd start a thread for this as I'll probably end up asking all sorts of questions, given that this is my first 'proper' Citroën.
       
      So... the ground clearance lever won't go all the way to the highest setting (all others work), which is bad 'cos the book says I need it to do that in order to check the LHM level. It feels like something's seized, so I don't want to force it. Any ideas for a plan of attack would be much appreciated.
       
      Next up are the wheels. I now have a set of 205 pepperpots that have just gone off for powder coating & I need to get some tyres for them. The handbook says the car should have 165/70R14s on, the wheels came with 185/65R14 on. Any thoughts about what size I should get please? Cheers.
       
×
×
  • Create New...