bunglebus Posted July 6, 2020 Share Posted July 6, 2020 I just hold the stand, almost everything is done with aerosols, although I have an ancient airbrush I fire up occasionally for acrylics or thinned nail varnish. I have two of those stands and could perhaps use a third now. And it's a Zodiac, this one 20200516_192330 by RS, on Flickr andrew e, Shite Ron, Dick Longbridge and 7 others 10 Link to comment Share on other sites More sharing options...
DoctorRetro Posted July 6, 2020 Share Posted July 6, 2020 Oh, so that must be one of those 'pre-production' Renault 25 models that was released in the late 1960s! ? Sudsprint 1 Link to comment Share on other sites More sharing options...
Spottedlaurel Posted July 6, 2020 Share Posted July 6, 2020 I've always used bent wire coat hangers for spraying 1:24 stuff, although they might be a bit tricky with 1:43 and smaller. Over the years the pair I use have been carefully manipulated into shapes which fit most cars with just a slight tweak, and a bit of masking tape to hold them in place just in case. It's then easy to twist the shell around and spray all the nooks and crannies. 1:24 Tamiya Renault 5 Turbo Kit by Spottedlaurel, on Flickr 1:24 Aoshima Toyota Ipsum kit by Spottedlaurel, on Flickr warch, Dick Longbridge, eddyramrod and 2 others 5 Link to comment Share on other sites More sharing options...
flat4alfa Posted July 6, 2020 Share Posted July 6, 2020 3 hours ago, bunglebus said: the jewel head/tail lights that I daren't prise out. I gave up with masking and trying to work around them, so drill a small access hole behind them to push them free. bunglebus 1 Link to comment Share on other sites More sharing options...
C1am Posted July 7, 2020 Share Posted July 7, 2020 Is there anything worth having in this lot? I'm intrigued to know what the green car is at bottom right? Only photo unfortunately. Link to comment Share on other sites More sharing options...
sierraman Posted July 7, 2020 Share Posted July 7, 2020 All depends what they’re asking do them. Link to comment Share on other sites More sharing options...
155V6 Posted July 7, 2020 Share Posted July 7, 2020 The building looks interesting,Matchbox Fire Station? eddyramrod and C1am 2 Link to comment Share on other sites More sharing options...
sierraman Posted July 7, 2020 Share Posted July 7, 2020 1 minute ago, 155V6 said: The building looks interesting,Matchbox Fire Station? Could be, they probably want more than an ACTUAL REAL FIRE STATION! Antiques m8! 155V6 1 Link to comment Share on other sites More sharing options...
Split_Pin Posted July 7, 2020 Author Share Posted July 7, 2020 19 hours ago, bunglebus said: Dinky Volvo, has a plastic base but still made in England 20200701_185557 by RS, on Flickr Earlier Corvette is plastic 20191221_103644 by RS, on Flickr Corgi R5 Turdo is also plastic 20200615_184346 by RS, on Flickr As is the standard car - it forms the bumpers 20200706_150316 by RS, on Flickr Right enough, some did indeed have plastic bases, just checked the Polo and indeed the R5. I can't remember if the Porsche 924 and Fiat X1/9 did or not. Still much nicer in quality and weight than the Dinky models of the time. Some Corgis of the period were much nicer than others then. The Ford Gran Torino, Kojak Buick Century Regal and Chevy Van all had plastic bases, these all seem to be firmly Mid 1970s. The Mercedes W114, Senator, Mini and MK3 Escort had metal bases, but the Sierra and Metro were plastic. I can't work out why this would be as both had the same level of detail and, in the main, opening features and detail so it doesn't appear to be a cost saving measure. Link to comment Share on other sites More sharing options...
bunglebus Posted July 7, 2020 Share Posted July 7, 2020 Yes there's a bit of both with Corgi and Matchbox. Metal bases add a nice bit of weight to the model and usually mean suspension, plastic is ok if it's detailed, sometimes like the R5 you can see why it makes sense to do it that way. On the 1:64 stuff I like plastic bases as they're easier to modify for silly wheels and lowering etc. Split_Pin 1 Link to comment Share on other sites More sharing options...
bunglebus Posted July 7, 2020 Share Posted July 7, 2020 HOWEVER. No modifications whatsoever were made to the Dinky Zodiac - I was more nervous than a nine tailed cat in a room full of rocking chairs putting this back together - I take my hat off to the people who had a few seconds to do it on a production line, getting all the doors, boot and bonnet in the right place and the base on is seriously tricky! I've ordered the missing headlights, NSR door card might be a bit harder. No new bits were used - even got the paint off the tyres I've also got the same problem as my Dinky MK1 Escort that I started years ago - the doors won't close without damaging the paint. I don't understand why as there's less on there than from the factory 20200516_192242 by RS, on Flickr 20200516_192250 by RS, on Flickr Dick Longbridge, C1am, Tenmil Socket and 18 others 21 Link to comment Share on other sites More sharing options...
Split_Pin Posted July 7, 2020 Author Share Posted July 7, 2020 That looks as-new now. Brilliant job. Sudsprint and bunglebus 2 Link to comment Share on other sites More sharing options...
flat4alfa Posted July 7, 2020 Share Posted July 7, 2020 What a resurrection! I don't know why paint rubs off on doors either, the Silver Wraith fought me there, so just left it. I think it's the softness/cheapness of the paint rather than thickness. Go on then, tell us how much you bagged that Zodiac paint bomb for...? Nice sock, BTW ? bunglebus 1 Link to comment Share on other sites More sharing options...
Datsuncog Posted July 7, 2020 Share Posted July 7, 2020 2 hours ago, C1am said: Is there anything worth having in this lot? I'm intrigued to know what the green car is at bottom right? Only photo unfortunately. If you're talking about stuff that might shift on eBay or whatnot, then the Dinky Supertoys Coles Crane Truck (orange/yellow, bottom right) and the Dinky Supertoys Foden Tanker (blue/red, above the fire station) should be of interest if they're reasonably undamaged... I'm guessing this is a lot at your local auction rooms? But the Lesney Matchbox MF1 fire station is a rarity, as others have pointed out! Despite the crack in the roof, buildings can fetch surprising amounts of coin. Doors unlikely to still be there, though. The green car under the crane truck looks to be a 1957 Chevrolet Corvette, in about 1/24 scale - Maisto, maybe? Probably not worth more then a coupla quid, but might display well if the windscreen's still intact. If it were me buying this with a view to resell, I'd probably bid up to £35 on this, mebbe £40 - would be interested to see what's lurking under the (worthless) Reader's Digest Days Gone 'classic trucks' box set, as there's clearly some 70s Matchbox in there... Amishtat and C1am 2 Link to comment Share on other sites More sharing options...
bunglebus Posted July 7, 2020 Share Posted July 7, 2020 14 minutes ago, flat4alfa said: Go on then, tell us how much you bagged that Zodiac paint bomb for...? Nice sock, BTW ? £4.85 posted. And about 40 new grey hairs. Yeah didn't noticed I'd become a foot model flat4alfa, Split_Pin, Amishtat and 1 other 2 2 Link to comment Share on other sites More sharing options...
Jon Posted July 7, 2020 Share Posted July 7, 2020 Hey, check out what I won last week! Only a flipping mint/boxed Husky Commer Walk Thru van!! But seconds into getting my mits on it.... I notice a staple..... Oh. I'll admit, I was quite crestfallen. I'll also admit, I did a quick Ebay check to see what these go for unopened, prior to bidding and I paid only a fraction of what an actual mint/boxed one was being offered at. So, no retirement fund but on the plus side, I could take a proper look, guilt free! I'd forgotten how small these Huskys were! I reckon you could slap this trackside in a Hornby raliway layout and it wouldn't look out of place. I've fond memories playing with a couple of these round at my grandparents' house back in the 80's. I'd forgotten quite how vivid the yellow/green colour was! The driver's door slides freely but the passenger side one is quite stiff, still. Unlike other Huskys, this Commer has a metal base. I don't remember the 'suspension' when playing with these 30+ years years ago but I guess they would've been quite playworn. Let's take a closer look - apologies for the crappy close-ups, my phone camera isn't great at this, it seems. It looks like the suspension is hollow rubber tube or suchlike. The rear of the packet mentions oiling the axles to aid free running - presumably, this was a quick solution to the emergence of Hot Wheels and the like? There seems to be a few Husky releases I wasn't aware of, too. One thing I'd totally forgotten about was the lack of rear door! I was convinced these came with a red roller door but I think I was just getting muddled with the Lesney Rentaset van I also played with round at my grans. It does beg the question why you'd make a van like this that you couldn't load stuff in?! Check out the 'glass' top though, which highlights the vast, empty space just waiting for marbles and suchlike, had there been an opening rear. Unlike here, in reality the plastic shines beautifully - I'll admit, it is as mint as fresh as the day it was made. Lastly, I cracked open the proper camera, to get a 'scene' shot. I'll admit I've used this one before but this one just seemed perfect for the task. Ulitmately, I'm much more interested in handling my die cast rather than staring at them through yellowed plastic bubbles. I feel like I was slightly taken for a ride on this one by the seller but not so much as to elicit a complaint - life's too short and I've probably learnt a lesson in the process, so all good. It still scores highly on the nostalgia front, even if that central windscreen pillar is bent. I'm sure that's just a sign of Corgi's high quality back in the day, so I won't risk chipping the paint, attempting to straighten it. Anyway, sorry for all the words. I did also receive another die cast parcel that day that I was excited to open! junkyarddog, Spottedlaurel, Amishtat and 14 others 17 Link to comment Share on other sites More sharing options...
Bren Posted July 7, 2020 Share Posted July 7, 2020 10 minutes ago, Jon said: Hey, check out what I won last week! Only a flipping mint/boxed Husky Commer Walk Thru van!! But seconds into getting my mits on it.... I notice a staple..... Oh. I'll admit, I was quite crestfallen. I'll also admit, I did a quick Ebay check to see what these go for unopened, prior to bidding and I paid only a fraction of what an actual mint/boxed one was being offered at. So, no retirement fund but on the plus side, I could take a proper look, guilt free! I'd forgotten how small these Huskys were! I reckon you could slap this trackside in a Hornby raliway layout and it wouldn't look out of place. I've fond memories playing with a couple of these round at my grandparents' house back in the 80's. I'd forgotten quite how vivid the yellow/green colour was! The driver's door slides freely but the passenger side one is quite stiff, still. Unlike other Huskys, this Commer has a metal base. I don't remember the 'suspension' when playing with these 30+ years years ago but I guess they would've been quite playworn. Let's take a closer look - apologies for the crappy close-ups, my phone camera isn't great at this, it seems. It looks like the suspension is hollow rubber tube or suchlike. The rear of the packet mentions oiling the axles to aid free running - presumably, this was a quick solution to the emergence of Hot Wheels and the like? There seems to be a few Husky releases I wasn't aware of, too. One thing I'd totally forgotten about was the lack of rear door! I was convinced these came with a red roller door but I think I was just getting muddled with the Lesney Rentaset van I also played with round at my grans. It does beg the question why you'd make a van like this that you couldn't load stuff in?! Check out the 'glass' top though, which highlights the vast, empty space just waiting for marbles and suchlike, had there been an opening rear. Unlike here, in reality the plastic shines beautifully - I'll admit, it is as mint as fresh as the day it was made. Lastly, I cracked open the proper camera, to get a 'scene' shot. I'll admit I've used this one before but this one just seemed perfect for the task. Ulitmately, I'm much more interested in handling my die cast rather than staring at them through yellowed plastic bubbles. I feel like I was slightly taken for a ride on this one by the seller but not so much as to elicit a complaint - life's too short and I've probably learnt a lesson in the process, so all good. It still scores highly on the nostalgia front, even if that central windscreen pillar is bent. I'm sure that's just a sign of Corgi's high quality back in the day, so I won't risk chipping the paint, attempting to straighten it. Anyway, sorry for all the words. I did also receive another die cast parcel that day that I was excited to open! A walk through van - looks like it has being stolen by the T1000 from terminator. Tenmil Socket, Datsuncog, flat4alfa and 1 other 4 Link to comment Share on other sites More sharing options...
Split_Pin Posted July 7, 2020 Author Share Posted July 7, 2020 Its a great little model and I like how it has the slightly longer nose presumably for the diesel engine. Mine is a wee bit more careworn but still looks great, I think I bought it from a shiter actually. Link to comment Share on other sites More sharing options...
quicksilver Posted July 7, 2020 Share Posted July 7, 2020 The Husky Commer is 1/87 or HO scale so you're right, it wouldn't look out of place on a model railway, albeit a continental one rather than Hornby. The Dutch firm Efsi did one in exact OO for UK railways, but interestingly chose the flat-fronted petrol version. Split_Pin, Jon and Datsuncog 3 Link to comment Share on other sites More sharing options...
flat4alfa Posted July 7, 2020 Share Posted July 7, 2020 35 minutes ago, Datsuncog said: The green car under the crane truck looks to be a 1957 Chevrolet Corvette, in about 1/24 scale - Maisto, maybe? Probably not worth more then a coupla quid, but might display well if the windscreen's still intact. Good spot. I struggled on that, rolled around the interwebs and gave up. Datsuncog and Sudsprint 2 Link to comment Share on other sites More sharing options...
warch Posted July 7, 2020 Share Posted July 7, 2020 It might be something innocent like a mint boxed example with defective glue on the blister that was shop or factory stapled back on to the card. Shops were often a bit more robust about stocking policy back in the day, so product with crushed or damaged packaging would still go on sale rather than being returned. Sudsprint 1 Link to comment Share on other sites More sharing options...
C1am Posted July 7, 2020 Share Posted July 7, 2020 42 minutes ago, Datsuncog said: I'm guessing this is a lot at your local auction rooms? Yes, thanks for the info, I thought there must be something of interest in there! Datsuncog 1 Link to comment Share on other sites More sharing options...
bunglebus Posted July 7, 2020 Share Posted July 7, 2020 I don't really like boxed stuff unless it can be opened without damage - seems a bit sad that a toy was never played with and enjoyed. Think you've got the best of both worlds there, I was having a look through my Huskys this morning and few have metal bases as you say Datsuncog, warch and Jon 3 Link to comment Share on other sites More sharing options...
MarvinsMom Posted July 7, 2020 Share Posted July 7, 2020 2 hours ago, quicksilver said: The Husky Commer is 1/87 or HO scale so you're right, it wouldn't look out of place on a model railway, albeit a continental one rather than Hornby. The Dutch firm Efsi did one in exact OO for UK railways, but interestingly chose the flat-fronted petrol version. i can confirm that the Husky Commer Walk Thru van does indeed look ok when parked up with 00 trains.... RayMK, Datsuncog, hennabm and 2 others 5 Link to comment Share on other sites More sharing options...
Datsuncog Posted July 7, 2020 Share Posted July 7, 2020 27 minutes ago, Jon said: Hey, check out what I won last week! Only a flipping mint/boxed Husky Commer Walk Thru van!! But seconds into getting my mits on it.... I notice a staple..... Oh. I'll admit, I was quite crestfallen. I'll also admit, I did a quick Ebay check to see what these go for unopened, prior to bidding and I paid only a fraction of what an actual mint/boxed one was being offered at. So, no retirement fund but on the plus side, I could take a proper look, guilt free! I'd forgotten how small these Huskys were! I reckon you could slap this trackside in a Hornby raliway layout and it wouldn't look out of place. I've fond memories playing with a couple of these round at my grandparents' house back in the 80's. I'd forgotten quite how vivid the yellow/green colour was! The driver's door slides freely but the passenger side one is quite stiff, still. Unlike other Huskys, this Commer has a metal base. I don't remember the 'suspension' when playing with these 30+ years years ago but I guess they would've been quite playworn. Let's take a closer look - apologies for the crappy close-ups, my phone camera isn't great at this, it seems. It looks like the suspension is hollow rubber tube or suchlike. The rear of the packet mentions oiling the axles to aid free running - presumably, this was a quick solution to the emergence of Hot Wheels and the like? There seems to be a few Husky releases I wasn't aware of, too. One thing I'd totally forgotten about was the lack of rear door! I was convinced these came with a red roller door but I think I was just getting muddled with the Lesney Rentaset van I also played with round at my grans. It does beg the question why you'd make a van like this that you couldn't load stuff in?! Check out the 'glass' top though, which highlights the vast, empty space just waiting for marbles and suchlike, had there been an opening rear. Unlike here, in reality the plastic shines beautifully - I'll admit, it is as mint as fresh as the day it was made. Lastly, I cracked open the proper camera, to get a 'scene' shot. I'll admit I've used this one before but this one just seemed perfect for the task. Ulitmately, I'm much more interested in handling my die cast rather than staring at them through yellowed plastic bubbles. I feel like I was slightly taken for a ride on this one by the seller but not so much as to elicit a complaint - life's too short and I've probably learnt a lesson in the process, so all good. It still scores highly on the nostalgia front, even if that central windscreen pillar is bent. I'm sure that's just a sign of Corgi's high quality back in the day, so I won't risk chipping the paint, attempting to straighten it. Anyway, sorry for all the words. I did also receive another die cast parcel that day that I was excited to open! That Commer's absolutely flippin' lovely, well scored Jon! One of those is deffo on my wants list, even if the driver does look a bit freaky. Yeah, blister packs pose a horrible conundrum... I'm an opener, but still feel guilty about it (though I've yet to try the acetone trick to dissolve glue while keeping the card backing undamaged - should give that a go on the Hot Wheels stuff upstairs). I can understand your mixed-blessing feeling about the staple fastening: not quite as decribed - but still cheap - better in some ways cos it's now removable - and worse in others, as it's not untouched. As there's clearly been cutting done, I think it's been an owner decision rather than a shop repair; but as it's in great shape maybe it offers the best of both worlds, if the price was right. Enjoy your 'new' van (with the usual Corgi casting issues)! Jon and Split_Pin 2 Link to comment Share on other sites More sharing options...
MarvinsMom Posted July 7, 2020 Share Posted July 7, 2020 oh no! its no longer a mint collectable!! and this is why i will never, ever buy anything nice in a blister pack. i wanna take it out to play with it, its no longer a mint collectable....... RayMK and Amishtat 2 Link to comment Share on other sites More sharing options...
flat4alfa Posted July 7, 2020 Share Posted July 7, 2020 On 6/20/2020 at 10:44 AM, flat4alfa said: What sort of money did that fetch as I was looking to cash-in on mine, but didn’t want to give it away (cock-up the auction) Sold on 'bay for almost £30. That's this months' lockup fees paid for, phew! DoctorRetro 1 Link to comment Share on other sites More sharing options...
flat4alfa Posted July 7, 2020 Share Posted July 7, 2020 Anyone know of Portugese brand met Osul? Had this Let it go as well for £15 top bid. It's nice enough but I can't fathom why it's really worth multiple times more than the complete Dinky Silver Shadow sold the week before Sudsprint, Datsuncog and bunglebus 3 Link to comment Share on other sites More sharing options...
DoctorRetro Posted July 7, 2020 Share Posted July 7, 2020 So, the Renault 25. I dug out the brown resin? or whatever it was, to discover the screw hole had been mangled and was not fit for use. Also, the screw thread was almost non existent. So I tapped a new thread, and added a panel on the base of the car to take a screw. Not pretty, but functional. Just now need to think how to make new headlights... If I design some on CAD, do you reckon they will come out OK on a 3D printer? Split_Pin, Datsuncog, Amishtat and 1 other 4 Link to comment Share on other sites More sharing options...
bunglebus Posted July 7, 2020 Share Posted July 7, 2020 3 hours ago, flat4alfa said: Anyone know of Portugese brand met Osul? I've got one or two but not that bus, lovely! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now