Jump to content

Angrydicky

Full Members
  • Posts

    6,295
  • Joined

  • Last visited

  • Days Won

    16

Reputation Activity

  1. Like
    Angrydicky got a reaction from CaptainBoom in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  2. Like
    Angrydicky got a reaction from Nyphur in Tell me about: Triumph Mayflower   
    Yes, there’s been a few people who have fitted Herald/Spitfire engines and some even retain the original gearbox with column change.
    I’m quite happy with the little sidevalve to be honest. It’s got loads of charm, if you view it more like a thirties car it doesn’t seem too slow.
  3. Agree
    Angrydicky got a reaction from ETCHY in Tell me about: Triumph Mayflower   
    Yes, there’s been a few people who have fitted Herald/Spitfire engines and some even retain the original gearbox with column change.
    I’m quite happy with the little sidevalve to be honest. It’s got loads of charm, if you view it more like a thirties car it doesn’t seem too slow.
  4. Like
    Angrydicky got a reaction from Jon in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  5. Like
    Angrydicky got a reaction from CaptainBoom in Tell me about: Triumph Mayflower   
    Holy thread resurrection!
    I bought myself a Mayflower on Saturday after years of wanting one. For once I spent proper money (four figures!) and got a decent one as my project queue is out of control and it’s embarrassing how few of my cars are actually on the road. The solution is obviously to buy MOAR cars.
    It’s a bit of a sad story this. It was cherished for years by some old boy in Northumberland who bought it in 1969 and presumably when he died or gave up driving it was sold and immediately got plate raped. The original number MRM 79 ended up on a Range Rover and the car ended up down south with a chap who spent over £7k at a vintage Rolls Royce and Bentley specialist having work done. It’s had a full suspension rebuild with all new springs, bushes, kingpins, new loom, fuel pipes, recored rad, rebuilt carb, distributor, new brakes all round, 5x new Michelin XZX tyres and loads of other stuff. 
    He then became ill and died before he had a chance to enjoy it. His son sold it for a fraction of the money spent to a chap who barely used it as he found it too slow. Also the gear linkage had been apart when the gearbox was out and they hadn’t got the adjustment correct so 1st to 2nd was very difficult. He used to slip the clutch and move off in 2nd which isn’t ideal on a Mayflower as 2nd is quite tall, being only a three speed. So he PXd for a Morris Minor it after doing about 150 miles. And made another whopping great loss on it.
    I bought it from the dealer.
    Spent a bit of time adjusting the gear linkage and now it’s a lot easier to engage, it was possible before but there was more of a knack to it.
    It drives like a new Mayflower in 1953 would have done. The ride is excellent and the engine quiet and smooth. The steering is nice and taut with little play and it’s a delight to drive. 
    There are a couple of minor tinkering jobs to do. It has no headlights at the moment. I’ve traced the fault to the switch so I’ve got a good used one winging its way to me.
    The drivers seat is sagging and it needs restuffing. The leather is all quite dry and needs feeding. But the interior is amazingly well preserved, it’s all original. The headlining is in perfect condition and it even still has its original rubber mats under the carpets and underlay .
    It also needs some decent numberplates as the cheap and nasty ones fitted look crap. The rear one hasn’t even been stamped, or fitted, straight. I’ll get onto Tippers when I get the V5 through.
    One of the most amazing things with this car is how straight it is. It’s had the undersills replaced but apart from that, it’s had no welding at all and doesn’t need any. I can’t see any filler in it at all. 
    It’s a great little thing to trundle around in and ok, it’s no speed demon but it’ll go at 45 all day and I’ve had it up to 50 a couple of times.
    Here’s some pictures. Is @vulgalour still around on here? I’m sure he’ll like it.
















     
  6. Like
    Angrydicky got a reaction from artdjones in Tell me about: Triumph Mayflower   
    Holy thread resurrection!
    I bought myself a Mayflower on Saturday after years of wanting one. For once I spent proper money (four figures!) and got a decent one as my project queue is out of control and it’s embarrassing how few of my cars are actually on the road. The solution is obviously to buy MOAR cars.
    It’s a bit of a sad story this. It was cherished for years by some old boy in Northumberland who bought it in 1969 and presumably when he died or gave up driving it was sold and immediately got plate raped. The original number MRM 79 ended up on a Range Rover and the car ended up down south with a chap who spent over £7k at a vintage Rolls Royce and Bentley specialist having work done. It’s had a full suspension rebuild with all new springs, bushes, kingpins, new loom, fuel pipes, recored rad, rebuilt carb, distributor, new brakes all round, 5x new Michelin XZX tyres and loads of other stuff. 
    He then became ill and died before he had a chance to enjoy it. His son sold it for a fraction of the money spent to a chap who barely used it as he found it too slow. Also the gear linkage had been apart when the gearbox was out and they hadn’t got the adjustment correct so 1st to 2nd was very difficult. He used to slip the clutch and move off in 2nd which isn’t ideal on a Mayflower as 2nd is quite tall, being only a three speed. So he PXd for a Morris Minor it after doing about 150 miles. And made another whopping great loss on it.
    I bought it from the dealer.
    Spent a bit of time adjusting the gear linkage and now it’s a lot easier to engage, it was possible before but there was more of a knack to it.
    It drives like a new Mayflower in 1953 would have done. The ride is excellent and the engine quiet and smooth. The steering is nice and taut with little play and it’s a delight to drive. 
    There are a couple of minor tinkering jobs to do. It has no headlights at the moment. I’ve traced the fault to the switch so I’ve got a good used one winging its way to me.
    The drivers seat is sagging and it needs restuffing. The leather is all quite dry and needs feeding. But the interior is amazingly well preserved, it’s all original. The headlining is in perfect condition and it even still has its original rubber mats under the carpets and underlay .
    It also needs some decent numberplates as the cheap and nasty ones fitted look crap. The rear one hasn’t even been stamped, or fitted, straight. I’ll get onto Tippers when I get the V5 through.
    One of the most amazing things with this car is how straight it is. It’s had the undersills replaced but apart from that, it’s had no welding at all and doesn’t need any. I can’t see any filler in it at all. 
    It’s a great little thing to trundle around in and ok, it’s no speed demon but it’ll go at 45 all day and I’ve had it up to 50 a couple of times.
    Here’s some pictures. Is @vulgalour still around on here? I’m sure he’ll like it.
















     
  7. Like
    Angrydicky got a reaction from Minimad5 in Tell me about: Triumph Mayflower   
    Yes, there’s been a few people who have fitted Herald/Spitfire engines and some even retain the original gearbox with column change.
    I’m quite happy with the little sidevalve to be honest. It’s got loads of charm, if you view it more like a thirties car it doesn’t seem too slow.
  8. Like
    Angrydicky got a reaction from catsinthewelder in Tell me about: Triumph Mayflower   
    Holy thread resurrection!
    I bought myself a Mayflower on Saturday after years of wanting one. For once I spent proper money (four figures!) and got a decent one as my project queue is out of control and it’s embarrassing how few of my cars are actually on the road. The solution is obviously to buy MOAR cars.
    It’s a bit of a sad story this. It was cherished for years by some old boy in Northumberland who bought it in 1969 and presumably when he died or gave up driving it was sold and immediately got plate raped. The original number MRM 79 ended up on a Range Rover and the car ended up down south with a chap who spent over £7k at a vintage Rolls Royce and Bentley specialist having work done. It’s had a full suspension rebuild with all new springs, bushes, kingpins, new loom, fuel pipes, recored rad, rebuilt carb, distributor, new brakes all round, 5x new Michelin XZX tyres and loads of other stuff. 
    He then became ill and died before he had a chance to enjoy it. His son sold it for a fraction of the money spent to a chap who barely used it as he found it too slow. Also the gear linkage had been apart when the gearbox was out and they hadn’t got the adjustment correct so 1st to 2nd was very difficult. He used to slip the clutch and move off in 2nd which isn’t ideal on a Mayflower as 2nd is quite tall, being only a three speed. So he PXd for a Morris Minor it after doing about 150 miles. And made another whopping great loss on it.
    I bought it from the dealer.
    Spent a bit of time adjusting the gear linkage and now it’s a lot easier to engage, it was possible before but there was more of a knack to it.
    It drives like a new Mayflower in 1953 would have done. The ride is excellent and the engine quiet and smooth. The steering is nice and taut with little play and it’s a delight to drive. 
    There are a couple of minor tinkering jobs to do. It has no headlights at the moment. I’ve traced the fault to the switch so I’ve got a good used one winging its way to me.
    The drivers seat is sagging and it needs restuffing. The leather is all quite dry and needs feeding. But the interior is amazingly well preserved, it’s all original. The headlining is in perfect condition and it even still has its original rubber mats under the carpets and underlay .
    It also needs some decent numberplates as the cheap and nasty ones fitted look crap. The rear one hasn’t even been stamped, or fitted, straight. I’ll get onto Tippers when I get the V5 through.
    One of the most amazing things with this car is how straight it is. It’s had the undersills replaced but apart from that, it’s had no welding at all and doesn’t need any. I can’t see any filler in it at all. 
    It’s a great little thing to trundle around in and ok, it’s no speed demon but it’ll go at 45 all day and I’ve had it up to 50 a couple of times.
    Here’s some pictures. Is @vulgalour still around on here? I’m sure he’ll like it.
















     
  9. Like
    Angrydicky got a reaction from Coprolalia in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  10. Like
    Angrydicky got a reaction from Jon in Tell me about: Triumph Mayflower   
    Holy thread resurrection!
    I bought myself a Mayflower on Saturday after years of wanting one. For once I spent proper money (four figures!) and got a decent one as my project queue is out of control and it’s embarrassing how few of my cars are actually on the road. The solution is obviously to buy MOAR cars.
    It’s a bit of a sad story this. It was cherished for years by some old boy in Northumberland who bought it in 1969 and presumably when he died or gave up driving it was sold and immediately got plate raped. The original number MRM 79 ended up on a Range Rover and the car ended up down south with a chap who spent over £7k at a vintage Rolls Royce and Bentley specialist having work done. It’s had a full suspension rebuild with all new springs, bushes, kingpins, new loom, fuel pipes, recored rad, rebuilt carb, distributor, new brakes all round, 5x new Michelin XZX tyres and loads of other stuff. 
    He then became ill and died before he had a chance to enjoy it. His son sold it for a fraction of the money spent to a chap who barely used it as he found it too slow. Also the gear linkage had been apart when the gearbox was out and they hadn’t got the adjustment correct so 1st to 2nd was very difficult. He used to slip the clutch and move off in 2nd which isn’t ideal on a Mayflower as 2nd is quite tall, being only a three speed. So he PXd for a Morris Minor it after doing about 150 miles. And made another whopping great loss on it.
    I bought it from the dealer.
    Spent a bit of time adjusting the gear linkage and now it’s a lot easier to engage, it was possible before but there was more of a knack to it.
    It drives like a new Mayflower in 1953 would have done. The ride is excellent and the engine quiet and smooth. The steering is nice and taut with little play and it’s a delight to drive. 
    There are a couple of minor tinkering jobs to do. It has no headlights at the moment. I’ve traced the fault to the switch so I’ve got a good used one winging its way to me.
    The drivers seat is sagging and it needs restuffing. The leather is all quite dry and needs feeding. But the interior is amazingly well preserved, it’s all original. The headlining is in perfect condition and it even still has its original rubber mats under the carpets and underlay .
    It also needs some decent numberplates as the cheap and nasty ones fitted look crap. The rear one hasn’t even been stamped, or fitted, straight. I’ll get onto Tippers when I get the V5 through.
    One of the most amazing things with this car is how straight it is. It’s had the undersills replaced but apart from that, it’s had no welding at all and doesn’t need any. I can’t see any filler in it at all. 
    It’s a great little thing to trundle around in and ok, it’s no speed demon but it’ll go at 45 all day and I’ve had it up to 50 a couple of times.
    Here’s some pictures. Is @vulgalour still around on here? I’m sure he’ll like it.
















     
  11. Like
    Angrydicky got a reaction from Nyphur in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  12. Like
    Angrydicky reacted to LightBulbFun in Tell me about: Triumph Mayflower   
    Yeah plate robbery is one of the things that makes me irrationally angry, especially when it comes to an older vehicle like that where the plate is engrained as part of its history and its identify
    it pisses me off on several levels, from the fact for example a car will lose its phyiscal original number plates, a nice original set of bluemels or such gone, in favour of the cheapest and nastiest modern pressed plates, or even worse i have seen just modern retro-reflective plates slapped on! 
    and then on a deeper level I know so many times how so many people have found old cars from them googling their reg number the classic example of a family finding out Great-grandads Old Austin 7 is still out there because they found an old photo from 90 years ago and googled the reg for a giggle
    however plate robbery, robs them of that chance, but this is a soapbox I could rant on for hours about
     
    but its funny you should mention the bent MOT, as you know I do fair bit of DVLA bashing, and one of those things is occasionally checking in on what the current re-reg series are up to, and the amount of times i have come across a freshly plate robbed vehicle with a completely clean MOT 
    I do often think myself "did that 1947 Morris, that last otherwise had a keeper change in 1986, really just manage to waltz through a clean MOT...." 
     
    I wonder if there is any way of getting the original reg back, do you know if it was sold through one of the many plate retailers out there, or if Mr Plate Robber sold it directly to Mr Range Rover?
    perhaps if you could chase it back up the line so to speak, get the person who sold the plate off the car, to pass on your details to the person who they sold the plate too, maybe you could get Mr Range Rover to sell it back to you at least? if nothing else might be worth keeping an eye on said number plate retailers
    a good friend of mine owns a Land Rover with original plate of 333EUL and he was able to eventually reunite it with its original number plate by stalking the number plate retailers
     
     
  13. Like
    Angrydicky got a reaction from 5speedracer in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  14. Like
    Angrydicky got a reaction from lesapandre in Tell me about: Triumph Mayflower   
    Yeah that’s well overpriced. I paid less than that for this one which is all on the road and very well sorted with a fortune spent on it.
    I did really want one which still had its original number. This one is a very original car which was in the same ownership 1969-2017 then in 2019 fell into the hands of someone who robbed the original number plate off it (MRM 79, now on a Range Rover). I suspect it was a bent mot as it did virtually no miles between 2013 and 2019 and the subsequent owner spent a fortune having it all recommissioned.
  15. Like
    Angrydicky reacted to Mr Pastry in Tell me about: Triumph Mayflower   
    Many older engines did not have oil filters except for a strainer in the sump.   It is usually quite difficult to add a proper full-flow filter  between the pump and the oil galleries - most of the conversions on early Fords etc. use a bypass system, which is easier to engineer but only filters a bit of the oil at a time.   It does work reasonably well, but it is a lot of work unless a kit is available, so arguably it is simpler just to change the oil more frequently.
  16. Like
    Angrydicky reacted to brownnova in Tell me about: Triumph Mayflower   
    He wanted £3500
    Hadn’t been on the road properly for a few years, needed new outer sills (at least), new brakes and the fan didn’t work. It was also very lopsided! 
    He said it was in “on the road condition because it runs, is MoT exempt and the plate has to be worth £2k on its own” Did try and talk him down to a more reasonable figure, but he was convinced he would make his money at auction. 
  17. Like
    Angrydicky got a reaction from Datsuncog in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  18. Like
    Angrydicky got a reaction from Sigmund Fraud in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  19. Like
    Angrydicky got a reaction from Coprolalia in Tell me about: Triumph Mayflower   
    Holy thread resurrection!
    I bought myself a Mayflower on Saturday after years of wanting one. For once I spent proper money (four figures!) and got a decent one as my project queue is out of control and it’s embarrassing how few of my cars are actually on the road. The solution is obviously to buy MOAR cars.
    It’s a bit of a sad story this. It was cherished for years by some old boy in Northumberland who bought it in 1969 and presumably when he died or gave up driving it was sold and immediately got plate raped. The original number MRM 79 ended up on a Range Rover and the car ended up down south with a chap who spent over £7k at a vintage Rolls Royce and Bentley specialist having work done. It’s had a full suspension rebuild with all new springs, bushes, kingpins, new loom, fuel pipes, recored rad, rebuilt carb, distributor, new brakes all round, 5x new Michelin XZX tyres and loads of other stuff. 
    He then became ill and died before he had a chance to enjoy it. His son sold it for a fraction of the money spent to a chap who barely used it as he found it too slow. Also the gear linkage had been apart when the gearbox was out and they hadn’t got the adjustment correct so 1st to 2nd was very difficult. He used to slip the clutch and move off in 2nd which isn’t ideal on a Mayflower as 2nd is quite tall, being only a three speed. So he PXd for a Morris Minor it after doing about 150 miles. And made another whopping great loss on it.
    I bought it from the dealer.
    Spent a bit of time adjusting the gear linkage and now it’s a lot easier to engage, it was possible before but there was more of a knack to it.
    It drives like a new Mayflower in 1953 would have done. The ride is excellent and the engine quiet and smooth. The steering is nice and taut with little play and it’s a delight to drive. 
    There are a couple of minor tinkering jobs to do. It has no headlights at the moment. I’ve traced the fault to the switch so I’ve got a good used one winging its way to me.
    The drivers seat is sagging and it needs restuffing. The leather is all quite dry and needs feeding. But the interior is amazingly well preserved, it’s all original. The headlining is in perfect condition and it even still has its original rubber mats under the carpets and underlay .
    It also needs some decent numberplates as the cheap and nasty ones fitted look crap. The rear one hasn’t even been stamped, or fitted, straight. I’ll get onto Tippers when I get the V5 through.
    One of the most amazing things with this car is how straight it is. It’s had the undersills replaced but apart from that, it’s had no welding at all and doesn’t need any. I can’t see any filler in it at all. 
    It’s a great little thing to trundle around in and ok, it’s no speed demon but it’ll go at 45 all day and I’ve had it up to 50 a couple of times.
    Here’s some pictures. Is @vulgalour still around on here? I’m sure he’ll like it.
















     
  20. Like
    Angrydicky got a reaction from Scruffy Bodger in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  21. Like
    Angrydicky got a reaction from adw1977 in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  22. Like
    Angrydicky got a reaction from Nyphur in Tell me about: Triumph Mayflower   
    Holy thread resurrection!
    I bought myself a Mayflower on Saturday after years of wanting one. For once I spent proper money (four figures!) and got a decent one as my project queue is out of control and it’s embarrassing how few of my cars are actually on the road. The solution is obviously to buy MOAR cars.
    It’s a bit of a sad story this. It was cherished for years by some old boy in Northumberland who bought it in 1969 and presumably when he died or gave up driving it was sold and immediately got plate raped. The original number MRM 79 ended up on a Range Rover and the car ended up down south with a chap who spent over £7k at a vintage Rolls Royce and Bentley specialist having work done. It’s had a full suspension rebuild with all new springs, bushes, kingpins, new loom, fuel pipes, recored rad, rebuilt carb, distributor, new brakes all round, 5x new Michelin XZX tyres and loads of other stuff. 
    He then became ill and died before he had a chance to enjoy it. His son sold it for a fraction of the money spent to a chap who barely used it as he found it too slow. Also the gear linkage had been apart when the gearbox was out and they hadn’t got the adjustment correct so 1st to 2nd was very difficult. He used to slip the clutch and move off in 2nd which isn’t ideal on a Mayflower as 2nd is quite tall, being only a three speed. So he PXd for a Morris Minor it after doing about 150 miles. And made another whopping great loss on it.
    I bought it from the dealer.
    Spent a bit of time adjusting the gear linkage and now it’s a lot easier to engage, it was possible before but there was more of a knack to it.
    It drives like a new Mayflower in 1953 would have done. The ride is excellent and the engine quiet and smooth. The steering is nice and taut with little play and it’s a delight to drive. 
    There are a couple of minor tinkering jobs to do. It has no headlights at the moment. I’ve traced the fault to the switch so I’ve got a good used one winging its way to me.
    The drivers seat is sagging and it needs restuffing. The leather is all quite dry and needs feeding. But the interior is amazingly well preserved, it’s all original. The headlining is in perfect condition and it even still has its original rubber mats under the carpets and underlay .
    It also needs some decent numberplates as the cheap and nasty ones fitted look crap. The rear one hasn’t even been stamped, or fitted, straight. I’ll get onto Tippers when I get the V5 through.
    One of the most amazing things with this car is how straight it is. It’s had the undersills replaced but apart from that, it’s had no welding at all and doesn’t need any. I can’t see any filler in it at all. 
    It’s a great little thing to trundle around in and ok, it’s no speed demon but it’ll go at 45 all day and I’ve had it up to 50 a couple of times.
    Here’s some pictures. Is @vulgalour still around on here? I’m sure he’ll like it.
















     
  23. Like
    Angrydicky got a reaction from 108 in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
  24. Like
    Angrydicky got a reaction from Sigmund Fraud in Tell me about: Triumph Mayflower   
    Holy thread resurrection!
    I bought myself a Mayflower on Saturday after years of wanting one. For once I spent proper money (four figures!) and got a decent one as my project queue is out of control and it’s embarrassing how few of my cars are actually on the road. The solution is obviously to buy MOAR cars.
    It’s a bit of a sad story this. It was cherished for years by some old boy in Northumberland who bought it in 1969 and presumably when he died or gave up driving it was sold and immediately got plate raped. The original number MRM 79 ended up on a Range Rover and the car ended up down south with a chap who spent over £7k at a vintage Rolls Royce and Bentley specialist having work done. It’s had a full suspension rebuild with all new springs, bushes, kingpins, new loom, fuel pipes, recored rad, rebuilt carb, distributor, new brakes all round, 5x new Michelin XZX tyres and loads of other stuff. 
    He then became ill and died before he had a chance to enjoy it. His son sold it for a fraction of the money spent to a chap who barely used it as he found it too slow. Also the gear linkage had been apart when the gearbox was out and they hadn’t got the adjustment correct so 1st to 2nd was very difficult. He used to slip the clutch and move off in 2nd which isn’t ideal on a Mayflower as 2nd is quite tall, being only a three speed. So he PXd for a Morris Minor it after doing about 150 miles. And made another whopping great loss on it.
    I bought it from the dealer.
    Spent a bit of time adjusting the gear linkage and now it’s a lot easier to engage, it was possible before but there was more of a knack to it.
    It drives like a new Mayflower in 1953 would have done. The ride is excellent and the engine quiet and smooth. The steering is nice and taut with little play and it’s a delight to drive. 
    There are a couple of minor tinkering jobs to do. It has no headlights at the moment. I’ve traced the fault to the switch so I’ve got a good used one winging its way to me.
    The drivers seat is sagging and it needs restuffing. The leather is all quite dry and needs feeding. But the interior is amazingly well preserved, it’s all original. The headlining is in perfect condition and it even still has its original rubber mats under the carpets and underlay .
    It also needs some decent numberplates as the cheap and nasty ones fitted look crap. The rear one hasn’t even been stamped, or fitted, straight. I’ll get onto Tippers when I get the V5 through.
    One of the most amazing things with this car is how straight it is. It’s had the undersills replaced but apart from that, it’s had no welding at all and doesn’t need any. I can’t see any filler in it at all. 
    It’s a great little thing to trundle around in and ok, it’s no speed demon but it’ll go at 45 all day and I’ve had it up to 50 a couple of times.
    Here’s some pictures. Is @vulgalour still around on here? I’m sure he’ll like it.
















     
  25. Like
    Angrydicky got a reaction from warch in Tell me about: Triumph Mayflower   
    I’ve been improving this car since picking it up on Saturday. Greased all the points, changed the oil (no filter on these) therefore it’s important to change it regularly. 
    Second gear was an awkward bastard. It was very reluctant to engage going 1st-2nd, but going down and the other gears were fine. The previous owner who traded it in for a Minor got in touch and said that second gear problem was one of the reasons he got rid of it, the other was the lack of speed. We can’t do much about the latter but what about the former. 
    He said he used to slip the clutch and move off in second which is less than ideal. Although the accepted thing to do with the Hampshire is pull away in second, it’s got a very torquey 2.2 OHV engine which the Mayflower, well, hasn’t so it’s important to have all the gears working correctly.
    Adjusting the gear linkage made it so it always went in but it wasn’t very smooth unless I double-declutched. I had a look at the clutch adjustment. The free play should be 1/2” but it was at least 2- 2 1/2”. Adjusted that up correctly and now it works perfectly and smoothly in all gears. 
    Other jobs included tuning up the engine, and feeding the very dry original leather with the leather cream Vulgalour used on his Lanchester, I went and bought a bottle on his recommendation. It’s had two applications already and it’s getting there but it hadn’t been done for years so it really needs another application. I also tightened up the fuel pump and the stator tube on the end of the steering box, both were leaking and topped up the steering box. I think the fuel pump may need a new gasket as it’s still weeping slightly but the steering box is now dry which is good. Unfortunately the (recently recored) rad is leaking from two places, the drain tap and a soldered joint on the side so I’ll have to whip that out and repair it. I’ve got a spare tap which should fit.
    The only other thing I’ve had to deal with is the non-functioning headlights. The car has a brand new loom so my first thought was they’ve forgotten to connect something or wired something in wrongly. I couldn’t find anything wrong with the loom so tested the switch with my test meter which showed it was faulty. To prove the point I ran a link wire across the back of the switch from sidelights to headlights with the switch turned on and the headlights came on. I ordered a secondhand replacement from the Austin Counties car club (same switch used on Somerset etc) which turned up and I tested it and it’s a goodun. Unfortunately you need to turn the ignition switch to the on position to remove and swap the barrel over and none of my keys would operate the switch. So that’ll have to wait until a key turns up for it.
    So far though, I’m loving it. It drives beautifully and it’s brimming with character. Also it’s nice to have something that doesn’t need welding!
×
×
  • Create New...