Tommyboy12

Potentially from the conversion. The speedo wiring is all black wires with butt connectors which is more likely the conversion. A lot of the wiring with labels seems to be 'aftermarket' like the radio and multiple keys and buttons that have been options to start the car in the past. I need to sort the main beam and fog lights really. Beyond that I am only tidying the wiring of redundant wires, sorting bad earths and soldering butt connectors. I really dont want to strip the loom out. I have enough major projects without adding anothe to my list!

Agreed. Bodged wiring is a pet peeve of mine

Decided to fix some issues on the Bug. Right hand indicators being one. Front and rear where bad earths. Wing was missing the earth wire completely. Bit of a pain soldering a new wire on but didn't fancy replacing the whole unit. Now have working indicators Also cleaned up some contacts in this rat's nest so I now have dipped beam in both headlights as opposed to just one. Still don't have main beam though. Ill need to go through it more but I'm not convinced the stalk isnt broken. Swapped out the radio with no facia for a top notch cassette deck. I need to find the speaker wiring though as I only have one speaker wire under the bonnet and have 3 speakers so there must be more somewhere! Also fixed the wipers more permanently. Still haven't got new wiper blades but they sweep across the whole screen now rather than just half and the washers work now Finally I did some engine wiring. The vac advance hose was broken so fitted a new one. Also adjusted the timing some more and selected a different setting on the dizzy. Also fixed this excuse for wiring... And adjusted the fan belt which was slipping. It's not got much life left so I've ordered a new one. There's as many unused wires under here as in the front 😅

I did not get wet at all! I was cold though. Haven't quite figured out the heater and all the vents

Not planning to 😂 It's more peppy than I was expecting but definitely sedate. I don't mind sitting at 60mph watching the world go by though. Stops you going deaf and gives you more chance to watch the people laughing and pointing at you 😂 We made it home! There's definitely some niggles to fix and whoever MoT'd was actually blind but it's not a bad car and bodywork is pretty good considering it's age and looks. It's solid just rough looking. Exactly the kind of thing I like!

Sedate at best but it's a nice drive Nearly home. About 30 mins away. Wasn't sure on fuel so stopped again. It's done about 35mpg.

Stopped for lunch. Still got 3 hours to go. Progress is steady at about 60mph before things get a bit deafening. Lunch: Poo count: 1 Wiper repairs: 5. Currently held together with cable ties and hope. The wipers worked, then they didn't, then I found the blade on the drives side wasn't clearing anything, then when I swapped them and they nearly fell off. Now I have something resembling a wiper on the drivers side which is useful given the ongoing rain. Passenger side may as well not be there

First stop on the way home for fuel. Wipers are a bit pants and right hand indicators don't work but that's not enough to stop me!

I have arrived. It is magnificent

On our way! I'm really looking forward to this one. My first foray into this type of car. Hopefully the weather holds! It's about 30 mins to collection Breakfast: Fancy Poo count: 1 Mode of transport: Ready to go!

Well with the MGF continuing to depress me it's obviously the right time to buy another car to give me that sweet sweet hit of dopamine. So collection caper time! Breakfast: TBD. Still in bed Poo count: 0. As per above Mode of transport to collection: Girlfriend's Hyundai i10. She has very kindly agreed to drive down with me so she can drive her car back and I don't leave it abandoned in the depths of Plymouth. It's a hell of a drive this one. So much so we decided to drive down last night and stay at a friends. It took 5 hours which wasn't bad considering the weather that was beating down yesterday. I suspect it will take slightly longer than this to get back based on the acquisition.

Maximum effort. Very impressed! I am also of the persuasion that I procrastinate over welding so well done for getting stuck in

I believe officially they have said it isnt cancelled but theres no news on any more episodes, etc. Its very unlikely that Freddie will come back though. I think the most disappointing thing about the accident with Freddie is it wasnt even a high speed high peril one like chucking a Metro off a dam. He just rolled an open top three wheeler at, reportedly, about 20mph. Obviously that doesnt detract from his injuries which are horrific and shouldnt happen to anyone. I think the show has its place. Its not likely that Ferrari or Bugatti are going to give their latest hypercar to just anyone but its cool to see them on TV. The show needs a bit of a revamp though and will probably benefit from a longer break. I feel it needs a group of genuinely interesting petrol heads that work well together. Potentially give some youtube stars some screen time. But three mates just pratting around has been done enough now.

Starting to lose the will to live on the MGF. It failed the emissions test again. Still ridiculously high at 9% CO. Seems the lambda might be toast and plugging it back in made no difference. I bought a new one and a catalytic converter (it already has some cheap aftermarket one fitted). Hopefully both those things sort it. I also bought a pscan scanning tool for earlier MG Rovers/Landrover/etc. Covers all the pre-OBD2 compliant cars with an OBD port. I had someone come over and scan the car with their pscan tool and it gave a few fault codes but I feel bad asking them to come over again. Plus I know I have the Rover 400 (which I am yet to even collect, let alone look at) which will no doubt need it. This isnt my first, or last MGR product so it will no doubt come in useful again.

Did you get the filter sorted? I had a similar issue with my Montego 1.3. That was a non oil cooled engine so fitted a Borg & Beck BFO4073 in the end.

It's been a spell. Have an update! Firstly I was meant to get my MGF ready for my annual pilgrimage to Scotland. This time round I was doing the Isle of Lewis and Harris as well as the NC500. The ultimate goal was to have the F ready for this but I failed. Rough wheel bearings and a lack of time prevented me from getting it ready in time. So instead I took my dad's MGF! Unfortunately my girlfriend span out in a big puddle/lake on the motorway on the way home. The culprit was a tyre with no tread. Not something I thought I would need to check as it had only had an MOT a few days before we took it! The damage wasn't major. A new bumper and tail light and a bit of panel massaging. Turned out there was also some rust under the bumper so I'll be cracking the welder out on it. My dad was very relaxed about it all thankfully 😅 Meanwhile my own MGF failed it's MOT on emissions and a loose battery. Turns out I hadn't plugged in the lambda sensor after unplugging the engine loom to remove the inlet manifold. Plus I didn't tighten the battery strap. I'm an idiot... It's back in for retest this week. Finally I have been doing some work to further control the temps on my turbo Mini. I treated myself to a thicker alloy radiator and I've gone from a 13 row oil cooler to a 19 row oil cooler. Before During featuring some top notch brackets. After This definitely didn't help on the old radiator.. But the new one is a bigger, thicker capacity with more fins and supposedly a better tube layout. The oil cooler has much more airflow now as less of it is blocked by the intercooler. Temps seem better although that's helped by the weather cooling off also. I'm planning to get some electric fans to help out with things too.

This looks very similar to the 79 I picked up about 6 weeks ago. I am yet to do anything with it though as the damned MGF I currently have is stealing all my time. Im also hoping to go for the rough and ready look. I love seeing original old Minis looking like theyve just survived the savaging of time. Most are too shiny and modified nowadays. Good luck with that roof. I hate doing roof welding...

I've had a recent misfire on the Mégane. It came about late last week as I was giving a company director a lift to his hotel. I've never driven so gently to try and hide a car not running right once I realised what had happened 😅 Once home I plugged in my non-branded eBay special obd reader and it gave me a very insightful overview of the issue. First up. Checked the spark and coils. This is cylinder 1. I found my issue very quickly. The seal failed on the pencil coil and let water in. Coil was wet and rusty. Bore full of corrosion and junk. Funnily enough a new coil on cylinder one and a set of spark plugs for all of them and it runs great again! And my director is none the wiser of my half breakdown...

Managed to get both functioning Minis out at the weekend. Firstly went to a local steam rally in the white Mini. It was 31C and she performed admirably without a hiccup. Saw some interesting metal for those that are vaguely interested. Then followed up on Sunday by going to Stanford Hall Mini Show in the turbo. It peaked at nearly 34C and taking the turbo was a poor decision in hindsight as it was far too hot for the borderline capable cooling system. It did a little wee when we stopped after getting home having peaked at 140C oil temp. Too hot and that oil is now toast. Ive bought myself a new larger radiator and a larger oil cooler. I will get these temps under control as best I can.

This is my fourth F/TF but unfortunately by far the worst so I'm used to the perils. I'm certainly used to the tight engine bays. Although there's certainly jobs I would rather not do like dropping the front subframe to change the bottom arms. I've bought a manual engine for the Mini even though it's an auto. The auto is seized and autos in Minis have paper gaskets between the clutch packs so if it's sat with no oil or got water in it the box will be scrap pretty much. Morbid curiosity means I'll probably try and get it running on the floor.

The cooling system is now back together on the MGF. Was a fairly easy task to get back together but I'm reminded that the cooling system is a pain to bleed. Also fitted a new thermostat, housing seals and new inlet manifold gasket. The hold gasket had sillycone on it of course... Also fitted a new fuel filter. The fuel coming out the old one was basically black. It's running and moving again and not leaking so now I need to get the wheel bearings done.

They're press in type. Getting the snap rings out was the most painful part as they had rusted into their groove. Pressed out and in an a press no problem though. I have it detailed earlier in this thread as I had to do it on the 1.3 Montego. The Metro, Maestro, Montego, Rover 200, MGF/TF and Lotus Elise all share the same wheel bearing from the Montego. I believe it's fitted to a few other things too.

Had more fun with the MGF. I took it for a short test drive after welding it and doing the bushes and I noticed two things. Firstly it needs a front wheel bearing. I'm getting Montego deja vu as it's the exact same wheel bearings making the exact same noise 😅 Secondly I sprang a leak in the cooling system. Water was dripping under the car when I returned home from the short drive. The temps didn't get hot but I'm not going to let a leak persist on a car with a marginal cooling system. So began the inspection of the cooling system. I identified the culprit fairly quickly from the trail of water down the block. A crusty metal pipe with a pin hole. Removing this pipe was a ball ache. It's bolted directly to the block under the inlet manifold with the engine look cable tied to it. Finally got it free after what felt like an eternity. It's crusty and holey. A stainless steel version is available which says it all but it's £160 and I don't want to pay that much so I've bought a £30 second hand steel one. This time the cars going back together with actual coolant in it. Water as a coolant is not enough!

Got some work done on the MG. Welded some holes up with the help of CAD. Sill end first Then the sill itself Then fold over to make the roll in the end and seam seal Then a coat of the finest direct to rust I also fixed my sloppy bush in the shock absorber One step closer. Although still a few jobs left to do

Tonight I finally finished the oil pump job by putting a new clutch seal on the Mini and getting it back together. Oil pressure shot up immediately and ran at a nice high 80psi. About right for a tight cold A series. Now I can move it to weld the MG which I may start tomorrow evening if the weather holds.