Jump to content

GingerNuttz

Full Members
  • Posts

    568
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by GingerNuttz

  1. You can remove the female connectors on the board or whatever it connects to, then it exposes the pins but if you haven't done out like that before just buy the pins
  2. Nah they look different, I reckon those ones will be similar to atx psu ones. Could solder the wire straight to the pin if you can solder well enough,as long as you don't need to take the wire back off. just snip that side of the connector off to make space for the newly soldered wire.
  3. Stepper motors or that use the same connectors if you happen to have any.
  4. Need crimps and the wee connectors to replace it or buy the connectors and solder it on to the wire. https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=XH2.54+connectors&_sacat=0
  5. I got a bomber in my ear within an hour on the first side then one down the sleeve later that day, next day I got another down the sleeve and one on my neck πŸ˜‚ I look like I've been shooting up . Not even a hard job in the grand scheme of things but it was soul destroying 🀣
  6. Never again πŸ˜‚ What was left of old flange New one, both sides are the same. Absolute bitch of a job to do with the cats not able to come off, burnt to shit too πŸ˜‚
  7. The flanges can be welded but I just didn't want to be the guy who breaks £££ parts to get em off πŸ˜‚ I put the impact on one of the bolts at 170psi and the bolt just laughed at me. I pity the fool who has to remove em. Anyways give me a week to sort out this funeral mess and that and I'll just cut the fuckers off.
  8. Galaxie backfired in the garage and my dad shit himself, he ran like fuck πŸ˜‚
  9. 6082 is structural aluminum so it should be ok, I can cut him 10 at a time so he's good for 3K miles between me needing to cut more 🀣
  10. I have no clue if it'll work πŸ˜‚ I'm cutting them from 6082 aluminium so it should be hard enough but if it isn't there's alumium bronze or just plain bronze we can move to, just trying to save him having to get an engine or new crank.
  11. Nearly there, just a new spindle mount to fit and better grounding then we can knock a pile of em out πŸ‘
  12. Was always a shot in the dark shimming that thrust bearing. Oh and obligatory
  13. hammer and dolly the ridge then fill. If you have any high spots after you rub the filler just knock em in with the hammer and dolly and fill again.
  14. Some pics outside after a wash. Be dirty again in half hour up there πŸ˜‚
  15. Already been welding on the Manta past few days so hoping to knock it out quite rapid πŸ˜‚
  16. Canny call it the rustang anymore.
  17. Shouldn't take much to finish now it's back is broke. When I restored a few MGB's the panels seemed quite good, didn't need to do to much fucking about to get most of them to fit.
  18. Turned into a fair bit of work that little motor, looks bang on now tho.
  19. Been a wild ride this one, have the scars to prove it the rest of my lifeπŸ˜‚
  20. MOT in a couple of days, booking it in Monday.
  21. Time to get a tig torch and some brazing rods for the Pearl πŸ˜‚
  22. Fill the tank full of water and mig it up, it won't blow up.
  23. Leave the cherry bombs and put in a thumper cam, got some of that lope life on the go πŸ‘Œ
  24. My welder has been inconsolable πŸ˜‚
×
×
  • Create New...