Tamworthbay Posted October 11, 2018 Share Posted October 11, 2018 Despite the best efforts of DPD tracking I finally have a nice INA water pump and full belt kit for the Ovlov in my mitts. I have treated it to some bits as well so hopefully it will repay the kindness by going well. The plan is to start tomorrow evening and get a good start on it, then finish it on Saturday. Wish us luck!I will stick pics up as we go but may not put any info on as typing on my phone is a pain in the arse so I will add it later. Think of it as old fashioned silent film in very slow mo........ Richard, The Moog, Ohdearme and 14 others 17 Link to comment Share on other sites More sharing options...
chaseracer Posted October 11, 2018 Share Posted October 11, 2018 Will there be musical accompaniment? Tamworthbay and Twiggy 2 Link to comment Share on other sites More sharing options...
Jim Bell Posted October 11, 2018 Share Posted October 11, 2018 Fingers, toes and shoelaces crossed. Tamworthbay and loserone 2 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 11, 2018 Author Share Posted October 11, 2018 Will there be musical accompaniment? Feel free to Dave! I have a feeling the noise coming from ourselves may be X rated! I have spent the last couple of weeks submerging myself in every video and breakdown of the job I can find and am feeling a lot happier about doing it, that and having an expert on hand of course! Hopefully I can be a bit more than a spanner passer and break my cherry on post 1990 cambelt complexity. The parts have come to about £200 all in, plus about £30 for sundries it’s a hell of a lot better than the £800 quoted by the garage! The difference between saving and scrapping. We are due to start at 6.30pm tomorrow so tune in to see the gory details, the heroes fighting against obscurity, sorry adversity, then a cliff hanger until we restart Saturday and hopefully saving the day. Jez is Batman, which sadly makes me Robin, now where are my green pants? purplebargeken, scdan4, tommotech and 3 others 6 Link to comment Share on other sites More sharing options...
Shirley Knott Posted October 11, 2018 Share Posted October 11, 2018 Be good to see this sorted out, steady away and best of luck with it. Tamworthbay 1 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 11, 2018 Author Share Posted October 11, 2018 This guys videos are fantastic in anyone else ever wants to tackle this job:https://m.youtube.com/channel/UCFXafuact8dlkODOtKOJ3KQ/videos Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 Hope this isn't am omen Link to comment Share on other sites More sharing options...
purplebargeken Posted October 12, 2018 Share Posted October 12, 2018 It'll all go fine! Tamworthbay 1 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 So it begins, all ready to go, will be at it soon. Shirley Knott, Richard, Jim Bell and 5 others 8 Link to comment Share on other sites More sharing options...
purplebargeken Posted October 12, 2018 Share Posted October 12, 2018 Looking forward to the mechanical rescue of this beastie. Tamworthbay 1 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 Just waiting for Jez (I am early) and then it will be being stripped within minutes. Jim Bell 1 Link to comment Share on other sites More sharing options...
chaseracer Posted October 12, 2018 Share Posted October 12, 2018 And the car...? gadgetgricey, Twiggy and Tamworthbay 3 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 Lacquer Peel, Shirley Knott, Jim Bell and 1 other 4 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 Hmmmm, don’t think this should be here, or the bit at the other end. On the plus side I think I have found where the rattle at tickover has come from! loserone, Richard and Jim Bell 3 Link to comment Share on other sites More sharing options...
martc Posted October 12, 2018 Share Posted October 12, 2018 Hope this isn't am omen WP_20181003_16_09_30_Pro.jpg Is it easier if the car is on it's side? (it's the picture of the speedo on it's side) Tamworthbay 1 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 scdan4, Shirley Knott, Jim Bell and 1 other 4 Link to comment Share on other sites More sharing options...
Lacquer Peel Posted October 12, 2018 Share Posted October 12, 2018 Ohh, the proper cam locking tool and not a door hinge. Fancy.Is the crank locked as well? Tamworthbay 1 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 Sorry for lack of updates but it’s been a busy night! Massive thanks to Jez again. We have got everything stripped off and the new water pump is in. Only issue so far is the broken shield above but that’s no biggy. The new water pump has two less teeth but we have decided that doesn’t matter, it will just spin a bit faster and work better (hopefully ). We will get going early tomorrow and hopefully have it sorted soon. Just need to do a bit of research on the water pump to be 100% sure it’s ok. tommotech, scdan4, Richard and 1 other 4 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 Either they have changed the spec or the old one is wrong, either way all is good. Jim Bell, scdan4 and Shirley Knott 3 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 Ohh, the proper cam locking tool and not a door hinge. Fancy.Is the crank locked as well?No, but the lovely inspection hole makes lining it up a doddle. Lacquer Peel 1 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 12, 2018 Author Share Posted October 12, 2018 Couple more pics from tonight Richard, Dirk Diggler, Lacquer Peel and 2 others 5 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 13, 2018 Author Share Posted October 13, 2018 Just about to set off again, will try and get more pics as we go along if I can. Sadly oily fingers don’t seem to work well on the touchscreen of the phone but hopefully most of the really dirty stuff is done. Jim Bell and mk2_craig 2 Link to comment Share on other sites More sharing options...
Richard Posted October 13, 2018 Share Posted October 13, 2018 Were you able to confirm that the old pump was buggered? Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 13, 2018 Author Share Posted October 13, 2018 Cambelt is on! Pat Earrings, Shirley Knott, Lacquer Peel and 2 others 5 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 13, 2018 Author Share Posted October 13, 2018 All tensioned up, just the big boy to get to torque now Richard, N Dentressangle and Lacquer Peel 3 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 13, 2018 Author Share Posted October 13, 2018 Nearly at start up point! Richard, dome, Lacquer Peel and 3 others 6 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 13, 2018 Author Share Posted October 13, 2018 IT RUNS! Pillock, Richard, Exiled_Tat_Gatherer and 15 others 18 Link to comment Share on other sites More sharing options...
Jim Bell Posted October 13, 2018 Share Posted October 13, 2018 Starts slow hand clap. Tamworthbay and Christine 2 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 13, 2018 Author Share Posted October 13, 2018 Just grabbing lunch then drain and refill and done! Christine and chaseracer 2 Link to comment Share on other sites More sharing options...
Tamworthbay Posted October 13, 2018 Author Share Posted October 13, 2018 Think it needs one more flush then done! Pillock, scdan4, Jim Bell and 4 others 7 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now