Jump to content

Fiesta Mk1 -


Christine

Recommended Posts

Poor old car has been neglected  in the shed for too many years . Sitting around doesn't do a car any good does it ?. The reason ? I've  never bonded  with it , it means nothing to me , I  dislike Fords , I only bought it  as it was cheap, good nick,  had good history ( over 9 grands worth !), one owner for its first 28 years , and i knew its value would increase .. I only drove it for about 500 miles in the first year I had it .Then the shed roof came off in high wind , and landed on the  bonnet creating a big dent . It was a new panel too . :-( I filled it , primed it , but some oil got  on it and soaked in,  which meant that I'd have to do it all over again and I lost interest ... I really want an HB Viva or an Imp !

Anyways ... Gigglepin has kindly  :shock:  booked me in for the Festival of the Unexceptional  ,so I'd better get my finger out and get it on the road !

 

post-17940-0-21726700-1525016545_thumb.jpg

 

Quick peak underneath ,wheels are full of brake fluid , tyres are bolloxed , so this is to be tackled first . I've done the nearside rear brake already ,wheel cylinder ,shoes ,springs kit ... just got to do the flexi hose ..its perished 

 

post-17940-0-26546000-1525016661_thumb.jpg

 

new bits ! :-D   Size of those discs !! Awesome..

 

post-17940-0-27033000-1525016769_thumb.jpg

 

 

Tyres have had it !

 

Will I get   165 70 12    on a 4" wheel  ?? 155  80 or  145 80  12  are the original size     

 

post-17940-0-62454600-1525016900_thumb.jpg

 

Engine runs sweet  :-D

 

post-17940-0-51708800-1525017078_thumb.jpg

 

Spud's  not fussed over Fords either..he'd like a Viva HB too   :mrgreen:

 

post-17940-0-45792500-1525017167_thumb.jpg

Link to comment
Share on other sites

That looks lovely I really should get a mk1 fiesta its an itch id like to scratch, im glad there aren't too many yellow fiestas around though on the basis we used to play yellow car punch and fiesta molest yer when we were driving around, a yellow fiesta would be a smack in the gentleman vegetables.

Link to comment
Share on other sites

Blimey,    I rebuilt this brake 6 years ago .... it's done minimal mileage , just been parked in a unheated shed . Glad I took it to bits again . It's pissed fluid everywhere  :shock: and gone rusty 

 

post-17940-0-04266900-1525100286_thumb.jpg

 

post-17940-0-61889700-1525100418_thumb.jpg

 

derusted   :-D

 

post-17940-0-47456500-1525100508_thumb.jpg

 

New everyfink

shit pic

post-17940-0-92074500-1525100610_thumb.jpg

 

Bugger ..Missing a rubber bung for the lining inspection hole , anyone got one ? The oval slot at 2 o'clock ...

 

post-17940-0-71549000-1525100851_thumb.jpg

 

 

New flexi . Those retaining clips are a pig to get on and off 

 

post-17940-0-94681000-1525100949_thumb.jpg

Link to comment
Share on other sites

More shite pics   .. New struts ,  discs and pads today .

 

Not that they were worn out , just a bit rusty .. Ford calipers ...OMG what a palarva they are ..split pins ,key  things , and anti rattle  wire spring things .... :roll:   Anyway , that's another thing to do , now off the list !! 

 

post-17940-0-97980300-1525366342_thumb.jpg

 

 

post-17940-0-55542500-1525366391_thumb.jpg

 

 

post-17940-0-18195900-1525366429_thumb.jpg

 

post-17940-0-98361500-1525368415_thumb.jpg

Link to comment
Share on other sites

Nice work, a friend and I restored* one of these a few years ago - by restored I mean we replaced all the oily bits, swapped the engine, got it on the verge of MOT....then someone knocked it off the jack and caved the door in.  Lost interest and sold it for a massive loss.

 

It did get finished by the next owner though, I saw it at a show a couple of years ago and it looked amazing, the new owner was a miserable cunt though.

Link to comment
Share on other sites

Those wheels are awesome!

They're 4 1/2 J"  x  12"  Ghia wheels .  Called "Kent " wheels i believe ? £25 quid ebay purchase . I polished them  .

 

Do you think a 165 70 12  tyre will be too wide ?  Or  even 165 60 12 ? 

 

Not much choice in 145 12   or 155 12 these days..

Link to comment
Share on other sites

4" x 12" Ghia wheels ! Called "Kent " wheels i believe ? £25 quid ebay purchase . I polished them .

 

Do you think a 165 70 12 tyre will be too wide ? Or even 165 60 12 ?

 

Not much choice in 145 12 or 155 12 these days..

Don't know own if I'm doing this right but there seems to be a few on here

 

https://www.mytyres.co.uk

 

OK that was supposed to be a link to a search for 155/70 13 with 21 results but the link was giant.

 

I'll have a look what's on mine as although flat they were wider than they should have been but worked OK.

Link to comment
Share on other sites

I absolutely love those Ghia wheels, particularly when attached to a MK1 Fiesta Ghia, with the bumper overriders, fake wood veneer centre console and velour.... Yum! I'm sure they look excellent on you car too, especially with the spoiler, it's definitely a look in keeping with a time when these were common, up-speccing more basic models.

 

My uncle had one which I would have had as a first car, if my older cousin didn't take it for a test drive and write it off. I was gutted.

Link to comment
Share on other sites

Excellent Fiesta revival ongoings...... After I killed my Cortina on Wroxham hump back bridge and the replacement BGT lunched its motor on the 4th day of ownership I ended up with a Mk1 950 in harvest gold (iirc). Thrashed that thing beyond anything reasonable and it kept on going. Loaned it to a local lass while I was working away for a while in exchange for services rendered....... got a text after a few months that it was parked up on the farm ...... which farm and where it went, I never ever found out.

 

Cracking little cars...... good luck

Link to comment
Share on other sites

Bah, the disc retaining screw on the offside is made of cheese and wouldn't budge ,so I had to drill it out and re tap it .  No spare to be found so the wheel bolts are holding it on for the time being  

 

post-17940-0-88559100-1525442964_thumb.jpg

 

 

 This side has had  a remanufactured caliper at some point 

 

 

post-17940-0-58039000-1525443076_thumb.jpg

 

A wheel..don't know why a took a pic of that , :unsure:  Dog didn't piss on it anyway  :-D

 

post-17940-0-38641700-1525443118_thumb.jpg

 

 

Stuboy ...be worried man ! :-D  :-D 

 

  I have a choice of 2 ... A Tigra one or a gutted stainless one ..

 

post-17940-0-65342300-1525443329_thumb.jpg

 

post-17940-0-20914000-1525443350_thumb.jpg

 

post-17940-0-77018500-1525443385_thumb.jpg

 

 

 

 

 

 

Link to comment
Share on other sites

Nice work! Looks to be in lovely order too.

 

I did similar on one which seems about 2 years ago.............just checked the thread and it was 2013!

 

Mine had to go sadly as nowhere to keep it...........is yours a keeper?

It's not a minter , the rear end is in the best state . The sides and bonnet /front panel need paint..I pulled off the rubbing strips and made a mess of it ..

 

Keeper? I've kept it long enough already haven't  I  ?  

 

post-17940-0-51116600-1525453989_thumb.jpg

 

 

 

My daughter may want it ,she's 15..only 2 more years before she's old enough to drive 

 

I'd like an  HB Viva  ( or  an  HC Viva , if it was a  coupe version ) or an  Imp , Midget or Spitfire 

Link to comment
Share on other sites

  That little bung that goes in the brake back plate I need  ? You pull it out to see how worn the linings are ...?

 

post-17940-0-53994600-1525514100_thumb.jpg

 

 

 

 

 I was missing one and Ebay was like £8 a pair ! What's that , Ford tax again?

 

Fuck that , I made one by making a mould in Plaster of Paris and a squirt of silicone...tight arse me  Just smacked open the plaster ..Perfect  !  :-D   

  

 

 

post-17940-0-18773900-1525514190_thumb.jpg

 

post-17940-0-31286200-1525514219_thumb.jpg

Link to comment
Share on other sites

Only other Fiesta thing I've done today  is fit an AA badge (straightly) to the freshly cleaned up grill .Thanks to Mercrocker for AA badge ,it's pristine  :-D

Going to  glue a bit of carpet gripper to the back of it ,  to stop thieving fingers tugging at it  :mad:  Vicious,  them little pins ...  :-)

And D.spares for Fordage badge 

 

post-17940-0-29928100-1525557918_thumb.jpg

Link to comment
Share on other sites

Great job on this!

Good to see a bit of creativity in making replacement bits yourself too. It’s bloody infuriating sometimes what people ask for parts for old Fords.

 

I nearly bought a bronze mk1 as my second car after I took the Capri off the road for its first resto. Some bastard beat me to it though so I went for a B reg mk2 Fiesta instead.

Link to comment
Share on other sites

I've had to use that car in some pretty monsoon-like conditions, on neither occasion did I die or have any 'moments', so I can only conclude their wet weather performance is OK.

 

They're "Low Noise" too, although I think might be somewhat academic on a car of the '70s.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...