dollywobbler Posted February 15, 2018 Author Share Posted February 15, 2018 Regulator on these is a Bosch unit, and I've heard from a few people in totally different places now that they can be a swine of a thing to adjust properly. Aye. The procedure is in the manual, and looks horrendous. Especially as you daren't meddle with it running, so you need to put the cover on, THEN see if it's made a difference. May go solid state. Or may just live with it. The fact it keeps starting suggests it's getting enough charge. Link to comment Share on other sites More sharing options...
PhilA Posted February 15, 2018 Share Posted February 15, 2018 Oh, nice. The act of refitting the lid puts it all out of whack? How novel. Introducing microwave waveguide style tetchiness into something designed to have minimal maintenance. Phil Link to comment Share on other sites More sharing options...
dollywobbler Posted February 15, 2018 Author Share Posted February 15, 2018 Oh, nice. The act of refitting the lid puts it all out of whack? How novel. Introducing microwave waveguide style tetchiness into something designed to have minimal maintenance. Phil No, but it means you can't do adjustments on the fly. It's disconnect battery, remove voltage reg lid, faff about in a very precise manner (preferably with special tools), put lid back on, reconnect battery and see what difference it makes. Link to comment Share on other sites More sharing options...
Noel Tidybeard Posted February 15, 2018 Share Posted February 15, 2018 not sure if this will work on a dynastart but maybe worth a looksee- check charge light wattage and if its 1.2/1.5w change for a 2w as this has the effect of lowering the required engine speed to start charging (this is a genuine mod for minimetros with a flickering alt light at idle as listed in the good ole HBOL) Link to comment Share on other sites More sharing options...
mrcitroen Posted February 16, 2018 Share Posted February 16, 2018 Voltage reg failed in my GS. It was a Paris Rhone one. Was replaced with a modern solid state Beru one from GSF. Eddie Honda 1 Link to comment Share on other sites More sharing options...
dollywobbler Posted February 16, 2018 Author Share Posted February 16, 2018 I've got a solid state one on the 2CV too. Think I might even have a spare somewhere, so I just need to work out the wiring differences. Link to comment Share on other sites More sharing options...
Noel Tidybeard Posted February 16, 2018 Share Posted February 16, 2018 i wonder if a mr wobbly would be desirious of some of these little rascals Link to comment Share on other sites More sharing options...
PhilA Posted February 16, 2018 Share Posted February 16, 2018 No, but it means you can't do adjustments on the fly. It's disconnect battery, remove voltage reg lid, faff about in a very precise manner (preferably with special tools), put lid back on, reconnect battery and see what difference it makes.That sounds efficient*. Phil Link to comment Share on other sites More sharing options...
gm Posted February 16, 2018 Share Posted February 16, 2018 I happened to be in the Riverside Museum in Glasgow yesterday and snapped this little fellow seems to be having rear light issues too slightly more conventional controls the wee man in the bobble hat is my nephew who had a great day out Lacquer Peel, LightBulbFun, egg and 1 other 4 Link to comment Share on other sites More sharing options...
dozeydustman Posted February 16, 2018 Share Posted February 16, 2018 Just had a thought, Mr Wobbler. Going back to 1998 my Simca suffered HGF†, after a short while after reassembly a valve clearance went tight as I put pushrods back in reverse order (ie cylinder 4 had cylinder 1's rods) and had similar symptoms to TWK's chugging idle. Wondering if a bit of build up crud has come off the valve or seat, or something dropped down the manifold, since burnt away, and the clearance has closed up a few thou. (†don't ask it wasn't HGF) Link to comment Share on other sites More sharing options...
dollywobbler Posted February 16, 2018 Author Share Posted February 16, 2018 Clearances are fine but highly likely that some crud is causing a valve not to fully close. Link to comment Share on other sites More sharing options...
madrat Posted February 16, 2018 Share Posted February 16, 2018 You really need to do a wet and dry compression test. Link to comment Share on other sites More sharing options...
DodgeRover Posted February 16, 2018 Share Posted February 16, 2018 If it is really cruddy a quick and dirty way of removing stubborn deposits is water injection. A squirt bottle or pressure sprayer in the inlet while running at a fast idle will do it madrat 1 Link to comment Share on other sites More sharing options...
wuvvum Posted February 17, 2018 Share Posted February 17, 2018 If it is really cruddy a quick and dirty way of removing stubborn deposits is water injection. A squirt bottle or pressure sprayer in the inlet while running at a fast idle will do ithttps://mustangforums.com/forum/5-0l-general-discussion/368307-i-m-done-with-this-car.html cort1977 1 Link to comment Share on other sites More sharing options...
dozeydustman Posted February 17, 2018 Share Posted February 17, 2018 https://mustangforums.com/forum/5-0l-general-discussion/368307-i-m-done-with-this-car.html That must have been a wind up, surely! Link to comment Share on other sites More sharing options...
Slartibartfast Posted February 17, 2018 Share Posted February 17, 2018 https://mustangforums.com/forum/5-0l-general-discussion/368307-i-m-done-with-this-car.htmlAh I've heard tell of this excellent story but was unable to find it using a Google search. I've finally got to read it. Link to comment Share on other sites More sharing options...
Isaac Hunt Posted February 17, 2018 Share Posted February 17, 2018 Well done of the fixerating of this here vehicle. I can remember seeing the odd one about when I was a kid and thought they were total and utter shite. Nevertheless, I guess some people were mighty pleased to receive one in the days of late 60's mobility. Seeing the inside of yours confirms the total basicness of the shite, raw glass fibre and basicness. All a part of motoring history and fair play for taking it on and getting it going, champion of the underdog. dollywobbler 1 Link to comment Share on other sites More sharing options...
The Moog Posted February 17, 2018 Share Posted February 17, 2018 As mentioned earlier... Wobbler TV DeeJay, madrat, Tadhg Tiogar and 1 other 4 Link to comment Share on other sites More sharing options...
wuvvum Posted February 17, 2018 Share Posted February 17, 2018 He's blue, da ba dee da ba die, &c. Lacquer Peel, The Moog, Angrydicky and 4 others 7 Link to comment Share on other sites More sharing options...
dollywobbler Posted February 18, 2018 Author Share Posted February 18, 2018 I'm a-feared... The Moog 1 Link to comment Share on other sites More sharing options...
DeeJay Posted February 18, 2018 Share Posted February 18, 2018 He's blue, da ba dee da ba die, &c.It's cold in that there Wales.Wobbler Smurf. The Moog 1 Link to comment Share on other sites More sharing options...
dollywobbler Posted February 19, 2018 Author Share Posted February 19, 2018 Thanks to Cobblers, who I met at the weekend. He supplied me with a couple of batteries. Here's a battery tray shot for our other Model 70 shiter. Utterly failed to take a photo of the battery in place. Can't find the clamp, so it's just bungeed in for now. Went for another test drive. I now have the front lid from the spares car fitted. The locks are seized on both, because they sit flat and fill up with water. I've gone for a pretty bow for now, but will have to engineer a finer solution. Dirk Diggler, Skizzer, Angrydicky and 8 others 11 Link to comment Share on other sites More sharing options...
barrett Posted February 19, 2018 Share Posted February 19, 2018 I'm strongly against the anthropomorphising of motor vehicles, but bloody hell doesn't it just have the most eager little face? Like a puppy keen to please. Lovely stuff. Does that door not work or what? The Moog, wuvvum, loserone and 4 others 7 Link to comment Share on other sites More sharing options...
dollywobbler Posted February 19, 2018 Author Share Posted February 19, 2018 I seem to be cornering the market for cute little cars. The Lexus is clearly going to have to get swapped for something cuter. The door does work, but they're a bit of faff to open and close at the moment, so I just leave them open, then drive around pretending I'm a delivery driver in the 1970s. Skizzer, madrat, egg and 4 others 7 Link to comment Share on other sites More sharing options...
oldcars Posted February 19, 2018 Share Posted February 19, 2018 Thanks to Cobblers, who I met at the weekend. He supplied me with a couple of batteries. Here's a battery tray shot for our other Model 70 shiter. Utterly failed to take a photo of the battery in place. Can't find the clamp, so it's just bungeed in for now. Went for another test drive. I now have the front lid from the spares car fitted. The locks are seized on both, because they sit flat and fill up with water. I've gone for a pretty bow for now, but will have to engineer a finer solution.I had to replace the lock on the Rialto bonnet last year too, same thing. Mine looks like a filing cabinet lock. Link to comment Share on other sites More sharing options...
PhilA Posted February 19, 2018 Share Posted February 19, 2018 Doesn't it have a little flap to keep the worst if the elements out? Squidging it full of either silicone grease or the funny gooey stuff you put in phone jacks* may help. Phil *It's the same stuff those funny gooey stress ball things you could get that would stick to the wall or a window of you throw them oldcars 1 Link to comment Share on other sites More sharing options...
dollywobbler Posted February 19, 2018 Author Share Posted February 19, 2018 Doesn't it have a little flap to keep the worst if the elements out? Squidging it full of either silicone grease or the funny gooey stuff you put in phone jacks* may help. Phil *It's the same stuff those funny gooey stress ball things you could get that would stick to the wall or a window of you throw them It does, but I think they're more designed to stop stuff splashing in than deal with a deluge direct into it. I'm not sure they were really designed for horizontal use. oldcars 1 Link to comment Share on other sites More sharing options...
Zelandeth Posted February 19, 2018 Share Posted February 19, 2018 Cheers for that! Definitely not seen anything like that tray in any of the boxes. Methinks some fabrication may be required... Link to comment Share on other sites More sharing options...
dollywobbler Posted February 21, 2018 Author Share Posted February 21, 2018 Not much to report really. Still awaiting a 1/4" whitworth spanner so I can get the doors off without yet more socket abuse. Also, the Honda has taken over the garage temporarily. However, I thought it important to have some instructions to hand, given how tricky the Invacar is to drive. I have also refitted both the external and internal engine covers. Much quieter! A sensible person would have washed the internal cover first, but I kind-of like the moss, and maybe it'll produce oxygen to offset fumes from the heating system. It's so narrow, I can get away with parking it here. Lacquer Peel, PhilA, oldcars and 16 others 19 Link to comment Share on other sites More sharing options...
dollywobbler Posted February 21, 2018 Author Share Posted February 21, 2018 Went mad in another bit to escape my laptop, and stole the rear window from the spares car. Managed to fit it inside out, despite carefully laying out the window rubber the right way. I'm an idiot. Still, it'll have to come out again I suspect. The seal isn't great, and I should probably sort out the broken bits of bodywork. Still, Invacar is sitting out for a while, so good to have it vaguely weathertight. Especially as a bird flew into it yesterday and shat on the fuel gauge. Slartibartfast, madrat, oldcars and 14 others 17 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now