Crispian_J_Hotson Posted November 30, 2018 Share Posted November 30, 2018 Wow. I nearly got an e30 touring but the boot aperture was too small for practicality. Family compromise, I got an E36. What a buy, good luck with it! Link to comment Share on other sites More sharing options...
Zelandeth Posted November 30, 2018 Share Posted November 30, 2018 The definite vibe I'm getting from that BMW interior is black-on-black-on-black to the extent that it actually pulls in all light from the surrounding area... Got to love a wooden steering wheel though. Had one on the Cappuccino, and it was lovely. Probably the single component I miss the most - once I'd re-glued the thing to the spokes to stop it creaking endlessly anyhow. DodgyBastard 1 Link to comment Share on other sites More sharing options...
Schaefft Posted December 1, 2018 Share Posted December 1, 2018 300 quid is absolutely mental for one of these nowadays, no matter what condition. What a bargain! My brother owned a 320i (I think) 4-door in the past, sold it for some reason and later bought a 316i (I think) 4-door that he recently put a lot of work into. He keeps asking about buying my 528i to put its engine into his, which will never happen. But there is a point, M52 swaps are very common and apparently pretty straight forward, so why not go with a 2.8? Link to comment Share on other sites More sharing options...
The Reverend Bluejeans Posted December 1, 2018 Share Posted December 1, 2018 M50/52 swaps are too much aggro. Nothing fits and everything has to be modified. A standard 2.5 will drop straight in but the diff ratio will be too low. The Touring already has the fatter 51mm front struts and disc brake rear axle. That's £1500+ as it stands with an MOT. Well purchased. A perfect uncracked E30 dash is now £400. Christine, oldcars and danthecapriman 3 Link to comment Share on other sites More sharing options...
DodgyBastard Posted December 1, 2018 Author Share Posted December 1, 2018 M50/52 swaps are too much aggro. Nothing fits and everything has to be modified. A standard 2.5 will drop straight in but the diff ratio will be too low. The Touring already has the fatter 51mm front struts and disc brake rear axle. That's £1500+ as it stands with an MOT. Well purchased. A perfect uncracked E30 dash is now £400. Unfortunately the dash does have a couple of cracks in it. I think if I was ever to seriously consider dropping in another engine it would be an m42 or m44. My last E30 touring I did start to swap an m42 into it but ran out of patience, enthusiasm, money and skill so ended selling it half finished to Bavarian retro. I'm sure the engine lived on in another touring. The Reverend Bluejeans 1 Link to comment Share on other sites More sharing options...
dome Posted December 1, 2018 Share Posted December 1, 2018 M57 ftw. Heavy but I reckon an E30 would good well with one. In a straight line anyway Link to comment Share on other sites More sharing options...
BavarianRetro Posted December 1, 2018 Share Posted December 1, 2018 Unfortunately the dash does have a couple of cracks in it. I think if I was ever to seriously consider dropping in another engine it would be an m42 or m44. My last E30 touring I did start to swap an m42 into it but ran out of patience, enthusiasm, money and skill so ended selling it half finished to Bavarian retro. I'm sure the engine lived on in another touring.It did. A Laguna Green L registration one! Link to comment Share on other sites More sharing options...
DodgyBastard Posted December 1, 2018 Author Share Posted December 1, 2018 RJC_5751 by srblythe, on Flickr Irish logbook has arrived for this so I'm going to continue with getting it registered and back on UK plates. Decided against selling it at the moment, I think it might be more worthwhile importing, getting it roadworthy and getting some use out of it before selling. cobblers, Jim Bell, Skizzer and 11 others 14 Link to comment Share on other sites More sharing options...
They_all_do_that_sir Posted December 2, 2018 Share Posted December 2, 2018 RJC_5751 by srblythe, on Flickr Irish logbook has arrived for this so I'm going to continue with getting it registered and back on UK plates. Decided against selling it at the moment, I think it might be more worthwhile importing, getting it roadworthy and getting some use out of it before selling.I'd wager that getting a UK registration on it, an MOT and into regular use would improve its value greatly. Wanky advert on carandclassic should see a modest profit I would have thought Sent from my TA-1012 using Tapatalk bangernomics 1 Link to comment Share on other sites More sharing options...
anonymous user Posted December 2, 2018 Share Posted December 2, 2018 Always liked those CE Mercedes, from when they still did stylish cars Link to comment Share on other sites More sharing options...
Tayne Posted December 5, 2018 Share Posted December 5, 2018 Found an old picture of Foadwerx. catsinthewelder, egg, richardthestag and 16 others 19 Link to comment Share on other sites More sharing options...
Christine Posted December 5, 2018 Share Posted December 5, 2018 Art deco Link to comment Share on other sites More sharing options...
DodgyBastard Posted December 5, 2018 Author Share Posted December 5, 2018 Found an old picture of Foadwerx. 3B77A34C-C340-4F0F-8DDD-BD815846539A.jpeg Looks similar but ours was known as the "Alice pit" which I've never been able to find any photos of. Link to comment Share on other sites More sharing options...
HMC Posted December 5, 2018 Share Posted December 5, 2018 What a barg that e30 was, looks a honey. Loving your fleet at the mo. Link to comment Share on other sites More sharing options...
DodgyBastard Posted December 5, 2018 Author Share Posted December 5, 2018 What a barg that e30 was, looks a honey. Loving your fleet at the mo.I know, I couldn't believe my ears when he said she wanted £300 for it! I got him to call her up right away to confirm it then went back the next day with the cash and a recovery truck.I'd say the wheels, interior and steering wheel could be sold for around £900.I am planning on keeping it though so all of that is irrelevant really. Sent from my G3311 using Tapatalk HMC and Burnside 2 Link to comment Share on other sites More sharing options...
hairnet Posted December 5, 2018 Share Posted December 5, 2018 so is it at a secret location to stop bruthas_touring coming fer it Link to comment Share on other sites More sharing options...
somewhatfoolish Posted December 5, 2018 Share Posted December 5, 2018 So your workshop/shite nerve centre is an old pithead building; did the tower thing have winding gear in it then? Interesting history. Link to comment Share on other sites More sharing options...
DodgyBastard Posted December 6, 2018 Author Share Posted December 6, 2018 So your workshop/shite nerve centre is an old pithead building; did the tower thing have winding gear in it then? Interesting history.I assume so, it was also used as an ncb training school in the 1980s. I think our unit used to be the boiler room and still has some old tiles on the walls.The building really is quite shit, the roof leaks and it's freezing inside but cheap rent, 3 phase electricity and our own toilet makes up for it slightly. Sent from my G3311 using Tapatalk chaseracer, richardthestag and somewhatfoolish 3 Link to comment Share on other sites More sharing options...
DodgyBastard Posted December 8, 2018 Author Share Posted December 8, 2018 I'm pretty sure it's not supposed to sound like that. Sounds like a diesel. Link to comment Share on other sites More sharing options...
captain_70s Posted December 8, 2018 Share Posted December 8, 2018 My Dolomite sounded like that for a while on Tuesday night, although it wasn't for very long... DeeJay 1 Link to comment Share on other sites More sharing options...
SiC Posted December 8, 2018 Share Posted December 8, 2018 Sounds just like my MGB... Link to comment Share on other sites More sharing options...
BavarianRetro Posted December 8, 2018 Share Posted December 8, 2018 Clogged up hydraulic tappets. Change oil and filter. Run for an hour. Change oil and filter. Run for an hour. Change oil and filter. DodgyBastard 1 Link to comment Share on other sites More sharing options...
DodgyBastard Posted December 8, 2018 Author Share Posted December 8, 2018 Clogged up hydraulic tappets. Change oil and filter. Run for an hour. Change oil and filter. Run for an hour. Change oil and filter. Sounds like a plan, I'll try that tomorrow. Link to comment Share on other sites More sharing options...
rainagain Posted December 8, 2018 Share Posted December 8, 2018 Also you try a can of that upper cylinder head lubricant you get. I’ve heard people using it to sort sticky lifters in the past Link to comment Share on other sites More sharing options...
Mrs6C Posted December 9, 2018 Share Posted December 9, 2018 Looks similar but ours was known as the "Alice pit" which I've never been able to find any photos of. Ta-dah! The 'Alice' pit, in the 1960s? Visitors to the 'Alice' pit in 1953 The 'Alice' pit on the OS map some time between 1888 and 1913... Here's an aerial image from between 1944 and 1950... not very clear but you can just make out the layout... The 'Alice' pit was one of several pits at the Fordell colliery. Confusingly, there was another 'Alice' pit over in the Begg Colliery at Kirkaldy...but that's not the correct one! The Scottish Mining Museum holds some photos of the correct 'Alice' pit.They are listed here:https://canmore.org.uk/site/131059/fordell-colliery-alice-pit?display=collection The Scottish Mining website is a good resource. Search on the home page for 'Alice'.http://www.scottishmining.co.uk/377.html The Alice Pit is mentioned here:http://freepages.rootsweb.com/~cmhrc/genealogy/lom38scot.htm#FIFE There is a lot of information and some photos of the Alice pit on the Fife Pits website here:http://www.fifepits.co.uk/ Choose the 'Central Fife' index and then 'A' from the list. The 'Alice Pit, Fordell' is there in the index. richardthestag, Jim Bell, dome and 8 others 11 Link to comment Share on other sites More sharing options...
nisfan Posted December 9, 2018 Share Posted December 9, 2018 Those visitors could have easily been from 2018 in Cowdenbeath The Moog, Mrs6C and oldcars 3 Link to comment Share on other sites More sharing options...
alcyonecorporation Posted December 9, 2018 Share Posted December 9, 2018 Where's FOADWERX? In Fife, mate. Lacquer Peel, Ghosty and Dave_Q 3 Link to comment Share on other sites More sharing options...
Mrs6C Posted December 9, 2018 Share Posted December 9, 2018 ^^^ Happy to delete the post and PM FOAD/ShiteKnight with the details instead if it is preferred... not a problem. Let me know! Link to comment Share on other sites More sharing options...
sierraman Posted December 9, 2018 Share Posted December 9, 2018 I assume so, it was also used as an ncb training school in the 1980s. I think our unit used to be the boiler room and still has some old tiles on the walls.The building really is quite shit, the roof leaks and it's freezing inside but cheap rent, 3 phase electricity and our own toilet makes up for it slightly. Sent from my G3311 using TapatalkHas the shaft been filled in? Link to comment Share on other sites More sharing options...
DodgyBastard Posted December 9, 2018 Author Share Posted December 9, 2018 ^^^ Happy to delete the post and PM FOAD/ShiteKnight with the details instead if it is preferred... not a problem. Let me know!I think he was referring to someone on another thread who had never been able to purchase a car from Fife because of the seller being vague on the actual location and just answering Fife mate.Where is it?Fife.Where in Fife?Just Fife mate.Etc etc. Sent from my G3311 using Tapatalk alcyonecorporation 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now